BS ISO 17296-3 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS
Hardcopy , PDF
30-11-2016
English
01-01-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Main characteristics and corresponding
test methods
5 Part and process testing - Specifications
and quality criteria
Bibliography
Includes the principal requirements applied to testing of parts manufactured by additive manufacturing processes.
Committee |
AMT/8
|
DevelopmentNote |
Supersedes 13/30271610 DC. (09/2014) Renumbered and Superseded by BS EN ISO 17296-3. (11/2016)
|
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO 17296-3:2014 | Identical |
ISO 23146:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method |
ISO 14610:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature |
ISO 13320:2009 | Particle size analysis Laser diffraction methods |
ISO 13003:2003 | Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions |
ISO 15850:2014 | Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach |
ISO 14629:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders |
ISO 3923-2:1981 | Metallic powders — Determination of apparent density — Part 2: Scott volumeter method |
ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
ISO 18754:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of density and apparent porosity |
ISO 1068:1975 | Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of compacted apparent bulk density |
ISO 20808:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
ISO 8130-1:1992 | Coating powders Part 1: Determination of particle size distribution by sieving |
ISO 148-2:2016 | Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
ISO 17162:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of monolithic ceramics at room temperature — Determination of compressive strength |
ISO 11664-4:2008 | Colorimetry Part 4: CIE 1976 L*a*b* Colour space |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
ISO 18753:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer |
ISO 7625:2012 | Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content |
ISO 15490:2008 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile strength of monolithic ceramics at room temperature |
ISO 22889:2013 | Metallic materials Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
ISO 4324:1977 | Surface active agents — Powders and granules — Measurement of the angle of repose |
ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
ISO 4497:1983 | Metallic powders Determination of particle size by dry sieving |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
ISO 6186:1998 | Plastics — Determination of pourability |
ISO 4506:1979 | Hardmetals Compression test |
ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
ISO 22214:2006 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of monolithic ceramics at room temperature |
ISO 11664-1:2007 | Colorimetry Part 1: CIE standard colorimetric observers |
ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 14704:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of monolithic ceramics at room temperature |
ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
ISO 3369:2006 | Impermeable sintered metal materials and hardmetals — Determination of density |
ISO 18756:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
ISO 16348:2003 | Metallic and other inorganic coatings Definitions and conventions concerning appearance |
ISO 13319:2007 | Determination of particle size distributions Electrical sensing zone method |
ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
ISO 18757:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
ISO 4610:2001 | Plastics Vinyl chloride homopolymer and copolymer resins Sieve analysis using air-jet sieve apparatus |
ISO 22215:2006 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for tensile creep of monolithic ceramics |
ISO/ASTM 52915:2016 | Specification for additive manufacturing file format (AMF) Version 1.2 |
ISO 604:2002 | Plastics — Determination of compressive properties |
ISO 129-1:2004 | Technical drawings Indication of dimensions and tolerances Part 1: General principles |
ISO 1143:2010 | Metallic materials Rotating bar bending fatigue testing |
ISO 24370:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method |
ISO 4490:2014 | Metallic powders Determination of flow rate by means of a calibrated funnel (Hall flowmeter) |
ISO 14703:2008 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Sample preparation for the determination of particle size distribution of ceramic powders |
ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
ISO 3327:2009 | Hardmetals — Determination of transverse rupture strength |
ISO 14405-1:2016 | Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes |
ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
ISO 24235:2007 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of particle size distribution of ceramic powders by laser diffraction method |
ISO 11664-5:2009 | Colorimetry Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram |
ISO 178:2010 | Plastics Determination of flexural properties |
ISO 15732:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption — BET method |
ISO 28704:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of porous ceramics at room temperature |
ISO 9276-6:2008 | Representation of results of particle size analysis — Part 6: Descriptive and quantitative representation of particle shape and morphology |
ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
ISO 6601:2002 | Plastics — Friction and wear by sliding — Identification of test parameters |
ISO 14129:1997 | Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.