BS ISO 15726:2009
Current
The latest, up-to-date edition.
Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron
Hardcopy , PDF
English
28-02-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser to the
electroplater
4.1 Essential information
4.2 Additional information
5 Designation
5.1 General
5.2 Designation specification
5.3 Basis metal
5.4 Stress-relief heat treatment prior to electroplating
5.5 Type and thickness of zinc alloy coating
5.6 Chromate conversion coatings and other supplementary
treatments
5.7 Hydrogen-embrittlement-relief heat treatment after
electroplating
5.8 Examples of coating designations
6 Requirements
6.1 Appearance
6.2 Thickness
6.3 Adhesion
6.4 Porosity
6.5 Composition of coating
6.6 Corrosion performance in neutral salt spray
6.7 Stress-relief heat treatments
6.8 Hydrogen-embrittlement-relief heat treatments
7 Sampling
Annex A (normative) - Thickness, adhesion and porosity tests
Annex B (normative) - Corrosion performance of zinc alloy
coatings with chromate conversion and other
supplementary treatments on steel in neutral salt spray
Bibliography
Provides the requirements for electrodeposited zinc alloy coatings containing either nickel, cobalt or iron.
| Committee |
STI/33
|
| DevelopmentNote |
Supersedes 07/30171995 DC. (03/2009)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard covers the requirements for electrodeposited zinc alloy coatings containing either nickel, cobalt or iron. It provides a method of designating the electrodeposited coatings, chromate conversion coatings and other supplementary treatments.
| Standards | Relationship |
| ISO 15726:2009 | Identical |
| ISO 3868:1976 | Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method |
| ISO 10309:1994 | Metallic coatings Porosity tests Ferroxyl test |
| ISO 9220:1988 | Metallic coatings Measurement of coating thickness Scanning electron microscope method |
| ISO 2080:2008 | Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary |
| ISO 10111:2000 | Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods |
| ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 27830:2008 | Metallic and other inorganic coatings Guidelines for specifying metallic and inorganic coatings |
| ISO 3543:2000 | Metallic and non-metallic coatings Measurement of thickness Beta backscatter method |
| ISO 27831-1:2008 | Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1: Ferrous metals and alloys |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| ISO 10587:2000 | Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method |
| ISO 15724:2001 | Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
| ASTM B 840 : 2015 : REDLINE | Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits |
| ISO 4518:1980 | Metallic coatings Measurement of coating thickness Profilometric method |
| ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
| ISO 27831-2:2008 | Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys |
| ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ISO 4519:1980 | Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes |
| ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
| ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 2177:2003 | Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution |
| ISO 10308:2006 | Metallic coatings Review of porosity tests |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.