BS ISO 13675:2013
Current
The latest, up-to-date edition.
Heating systems in buildings. Method and design for calculation of the system energy performance. Combustion systems (boilers)
Hardcopy , PDF
English
28-02-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Alignment of the parts of the heating system standards
5 Generation sub-system calculation
Annex A (informative) - Additional formulas and default values
for parametering the boiler efficiency method
Annex B (informative) - General part default values and
information
Annex C (normative) - Maximum heating power in the
building zone
Annex D (informative) - Calculation examples for modulating
condensing boiler
Annex E (informative) - Generation sub-systems and gross
calorific values
Bibliography
Provides the: - required inputs, - calculation method, and - resulting outputs for space heating generation by combustion sub-systems (boilers) including control.
| Committee |
RHE/2
|
| DevelopmentNote |
Supersedes 12/30239784 DC. (02/2014)
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard is the general standard on generation by combustion sub-systems (boilers) for oil, gas, coal and biomass burning.
It specifies the
required inputs,
calculation method, and
resulting outputs
for space heating generation by combustion sub-systems (boilers) including control.
This International Standard is also intended for the case of generation for both domestic hot water production and space heating.
| Standards | Relationship |
| ISO 13675:2013 | Identical |
| EN 15316-3-3:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation |
| EN 303-6:2000 | Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW |
| EN 677:1998 | Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW |
| ISO 9488:1999 | Solar energy Vocabulary |
| EN 304:2017 | Heating boilers - Test code for heating boilers for atomizing oil burners |
| EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
| EN 15456:2008 | Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements |
| EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 15316-4-7:2008 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| EN 303-2:2017 | Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners |
| ISO 13602-2:2006 | Technical energy systems Methods for analysis Part 2: Weighting and aggregation of energywares |
| EN 15316-2-1:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems |
| EN 303-4:1999 | Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking |
| 92/42/EEC : 1992 AMD 5 2013 | COUNCIL DIRECTIVE 92/42/EEC OF 21 MAY 1992 ON EFFICIENCY REQUIREMENTS FOR NEW HOT-WATER BOILERS FIRED WITH LIQUID OR GASEOUS FUELS |
| EN 303-7:2006 | Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW |
| EN 15316-3-2:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution |
| ISO 13790:2008 | Energy performance of buildings Calculation of energy use for space heating and cooling |
| EN 15035:2006 | Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
| EN 15316-4-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1 |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
| EN 15316-2-3:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems |
| EN 625:1995 | Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.