BS ISO 13577-1:2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Industrial furnaces and associated processing equipment. Safety General requirements
Hardcopy , PDF
26-07-2024
English
30-09-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Verification
6 Information for use
Annex A (informative) - List of significant hazards
Annex B (informative) - List of common industrial furnaces
and associated processing equipment
Annex C (informative) - Typical test report
Annex D (informative) - Work-permit authorization
Annex E (informative) - Information specific to Japan
Annex F (informative) - Requirements specific to the USA
Annex G (informative) - Requirements specific to the EU
and associated countries
Annex H (informative) - Requirements specific to Canada
Annex I (informative) - Requirements specific to China
Bibliography
Describes the general safety requirements common to industrial furnaces and associated processing equipment (TPE).
| Committee |
RHE/13
|
| DevelopmentNote |
Supersedes 11/30232911 DC. (08/2012)
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
This document specifies the general safety requirements common to industrial furnaces and associated processing equipment (TPE). This document deals with the significant hazards, hazardous situations or hazardous events relevant to TPE, as listed in AnnexA, when TPE is used as intended and also under conditions of misuse that are reasonably foreseeable by the manufacturer. AnnexB provides a list of common industrial furnaces and associated processing equipment. This document specifies the requirements intended to be met by the manufacturer to ensure the safety of persons and property during commissioning, start-up, operation, shut-down, maintenance periods and dismantling, as well as in the event of foreseeable faults or malfunctions that can occur in the equipment. These general safety requirements apply to all TPE, unless an exception is given in other parts of ISO13577 dealing with specific equipment. The provisions of other parts of ISO13577 that directly apply to specific types of TPE take precedence over the provisions of this document. This document is not applicable to blast furnaces, converters (in steel plants), boilers or equipment not covered under ISO12100 .
| Standards | Relationship |
| ISO 13577-1:2016 | Identical |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| 2006/95/EC : 2006 | DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE) |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 7243:2017 | Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index |
| EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV | Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 14123-1:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| ISO 13574:2015 | Industrial furnaces and associated processing equipment — Vocabulary |
| ISO 11690-2:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures |
| ISO 11429:1996 | Ergonomics — System of auditory and visual danger and information signals |
| IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 7933:2004 | Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| ISO 15534-1:2000 | Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN 1547:2001+A1:2009 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| IEC 62598:2011 | Nuclear instrumentation - Constructional requirements and classification of radiometric gauges |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| CGA G 4.4 : 2012 | OXYGEN PIPELINE AND PIPING SYSTEMS |
| CGA G 4.1 : 2009 | CLEANING EQUIPMENT FOR OXYGEN SERVICE |
| ISO 15534-2:2000 | Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
| ISO 13577-4:2014 | Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems |
| ISO 14123-2:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.