BS EN ISO 9227:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Corrosion tests in artificial atmospheres. Salt spray tests
Available format(s)
Hardcopy , PDF
Superseded date
25-11-2022
Superseded by
Language(s)
English
Published date
30-06-2017
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Test solutions
6 Apparatus
7 Method for evaluating cabinet corrosivity
8 Test specimens
9 Arrangement of the test specimens
10 Operating conditions
11 Duration of tests
12 Treatment of test specimens after test
13 Evaluation of results
14 Test report
Annex A (informative) - Example schematic diagram
of one possible design of spray cabinet with means
for optional treating fog exhaust and drain
Annex B (informative) - Complementary method for
evaluating cabinet corrosivity using zinc
reference specimens
Annex C (normative) - Preparation of specimens
with organic coatings for testing
Annex D (normative) - Required supplementary
information for testing test specimens with
organic coatings
Bibliography
Describes the apparatus, the reagents and the procedure to be used in conducting the neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray (CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent or temporary corrosion protection.
| Committee |
ISENFE/8
|
| DevelopmentNote |
Supersedes BS 7479(1991), BS EN ISO 7253 and 01/713017 DC (08/2006) Supersedes 12/30249839 DC. (06/2012) Supersedes 15/30284318 DC. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 9227 : 2017 | Identical |
| NBN EN ISO 9227 : 2012 | Identical |
| ISO 9227:2017 | Identical |
| NEN EN ISO 9227 : 2017 | Identical |
| EN ISO 9227:2017 | Identical |
| NS EN ISO 9227 : 2017 | Identical |
| SN EN ISO 9227 : 2017 | Identical |
| UNE-EN ISO 9227:2017 | Identical |
| NF EN ISO 9227 : 2017 | Identical |
| UNI EN ISO 9227 : 2012 | Identical |
| I.S. EN ISO 9227:2017 | Identical |
| 09/30196835 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| 09/30203673 DC : 0 | BS 7371-7 - COATINGS ON METAL FASTENERS - PART 7: SPECIFICATION FOR MECHANICALLY APPLIED ZINC AND ZINC BASED COATINGS |
| SAE AMS 03-25 : 2017 | SULFURIC ACID ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS |
| BS 8499:2017 | Specification for domestic gas meter boxes and meter bracket |
| BS 8529:2010 | Composite doorsets. Domestic external doorsets. Specification |
| BS 4873:2016 | Aluminium alloy windows and doorsets. Specification |
| BS 4368-1(1998) : 1998 | METALLIC TUBE CONNECTORS FOR FLUID POWER AND GENERAL USE - PART 1: SPLIT COLLET COMPRESSION FITTINGS |
| DEFSTAN 47-32/2(2011) : 2011 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| BS 7371-7:2010 | Coatings on metal fasteners Specification for mechanically applied zinc and zinc based coatings |
| DEFSTAN 03-36/2(2010) : 2010 | GUIDANCE TO THE USE OF CADMIUM ALTERNATIVES IN THE PROTECTIVE COATING OF DEFENCE EQUIPMENT |
| DEFSTAN 03-28(PT2)/4(2008) : 2008 | PHYSICAL VAPOUR DEPOSITION OF METALS - PART 2: PHYSICAL VAPOUR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| DEFSTAN 03-25/5(2008) : 2008 | SULFURIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| DEFSTAN 47-032/3(2017) : 2017 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| DEFSTAN 03-28(PT1)/4(2008) : 2008 | PHYSICAL VAPOUR DEPOSITION OF METALS - PART 1: PHYSICAL VAPOUR DEPOSITION OF ALUMINIUM FOR PROTECTION AGAINST CORROSION |
| BS 7371-8:2011 | Coatings on metal fasteners Specification for sherardized coatings |
| BS EN 1993-1-11 NA : 2006 | UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| 09/30196573 DC : 0 | BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| SAE AMS 03-040 : 2017 | ELECTRODEPOSITION OF ZINC-NICKEL ALLOYS |
| BS 8499:2009 | Specification for domestic gas meter boxes and meter bracket |
| DEFSTAN 03-39/1(2008) : 2008 | ELECTRODEPOSITION OF ZINC-COBALT ALLOYS |
| BS 6510:2010 | Steel-framed windows and glazed doors. Specification |
| BS 1722-16:2009 | Fences Specification for powder coatings used as a plastics finish to components and mesh |
| BS 644:2012 | Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification |
| BS 644:2009 | Timber windows. Fully finished factory-assembled windows of various types. Specification |
| BS 7371-3:2009 | Coatings on metal fasteners Specifications for electroplated zinc coatings |
| BS 1245:2012 | Pedestrian doorsets and door frames made from steel sheet. Specification |
| 12/30263952 DC : 0 | BS EN 61048:2006+A1 - AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
| 12/30218393 DC : 0 | BS 644 - TIMBER WINDOWS AND DOORSETS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS AND DOORSETS OF VARIOUS TYPES - SPECIFICATION |
| 08/30128144 DC : DRAFT APR 2008 | BS EN 1993-1-11 - UK NATIONAL ANNEX TO EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| SAE AMS 03-18 : 2018 | CHROMATE CONVERSION COATINGS (CHROMATE FILMING TREATMENTS) GRADES: STANDARD AND BRUSHING FOR ALUMINUM AND ALUMINUM ALLOYS |
| 10/30228091 DC : 0 | BS 7371-8 - COATINGS ON METAL FASTENERS - PART 8: SPECIFICATION FOR SHERARDIZED COATINGS |
| 11/30142900 DC : 0 | BS 1245 - PEDESTRIAN DOORSETS AND DOOR FRAMES MADE FROM STEEL SHEET - SPECIFICATION |
| 11/30124825 DC : 0 | BS 7993 - TWIN FERRULE CONNECTORS AND ASSOCIATED TUBING FOR 316 STAINLESS STEEL SYSTEMS - SPECIFICATION AND TEST METHODS |
| 14/30290247 DC : 0 | BS X38:2005 + A1 - HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION |
| 08/30143160 DC : DRAFT AUG 2008 | BS 4873 - ALUMINIUM ALLOY WINDOWS AND DOOR SETS - SPECIFICATION |
| BS X38(2005) : 2005 | HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION |
| BS 8513:2009 | Personal fall protection equipment. Twin-legged energy-absorbing lanyards. Specification |
| 14/30284897 DC : 0 | BS 4368-1(1998) + A1 - METALLIC TUBE CONNECTORS FOR FLUID POWER AND GENERAL USE - PART 1: SPLIT COLLET COMPRESSION FITTINGS |
| 07/30163140 DC : DRAFT MAR 2007 | BS 5315 - HOSE CLAMPS (WORM DRIVE TYPE) FOR GENERAL PURPOSE USE (METRIC SERIES) |
| 07/30139517 DC : 0 | BS 1722-16 - FENCES - PART 16: SPECIFICATION FOR POWDER COATINGS USED AS A PLASTICS FINISH TO COMPONENTS AND MESH |
| BS 8610:2017 | Personal fall protection equipment. Anchor systems. Specification |
| DEFSTAN 03-18/5(2012) : 2012 | CHROMATE CONVERSION COATINGS (CHROMATE FILMING TREATMENTS) GRADES: STANDARD AND BRUSHING FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| SAE AMS 03-14 : 2018 | ELECTRODEPOSITION OF CHROMIUM FOR ENGINEERING PURPOSES |
| BS 5315:1991 | Hose clamps (worm drive type) for general purpose use (metric series) |
| DEFSTAN 03-43/1(2008) : 2008 | THERMAL SPRAYED COATINGS FOR WEAR RESISTANCE |
| DEFSTAN 03-40/1(2008) : 2008 | ELECTRODEPOSITION OF ZINC-NICKEL ALLOYS |
| 15/30318434 DC : 0 | BS 4873 - ALUMINIUM ALLOY WINDOWS AND DOORSETS - SPECIFICATION |
| SAE AMS 03-28-2 : 2017 | PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| BS 7993:2011 | Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods |
| DEFSTAN 03-41/1(2008) : 2008 | TRIVALENT CHROMIUM PASSIVATION TREATMENTS FOR ELECTRODEPOSITED ZINC-BASE COATINGS |
| BS 8530:2010 | Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification |
| DEFSTAN 03-18/4(2008) : 2008 | CHROMATE CONVERSION COATINGS (CHROMATE FILMING TREATMENTS) GRADES: STANDARD AND BRUSHING FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| DEFSTAN 03-24/5(2008) : 2008 | CHROMIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 08/30133820 DC : DRAFT SEP 2008 | BS 7371-3 - COATINGS ON METAL FASTENERS - PART 3: SPECIFICATIONS FOR ELECTROPLATED ZINC COATINGS |
| 09/30160438 DC : DRAFT JAN 2009 | BS 8499 - SPECIFICATION FOR DOMESTIC GAS METER BOXES AND METER BRACKET |
| BS 4873:2009 | Aluminium alloy windows and doorsets. Specification |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 7599:2010 | Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium |
| ISO 8993:2010 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| ISO 8994:2011 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Grid method |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 4628-8:2012 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| ISO 17872:2007 | Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 8407:2009 | Corrosion of metals and alloys Removal of corrosion products from corrosion test specimens |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.