BS EN ISO 8325:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Dentistry. Test methods for rotary instruments
Hardcopy , PDF
29-03-2023
English
24-09-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test methods
4.1 General
4.2 Atmospheric conditions
4.3 Measurement instruments
5 Measuring of single characteristics of instruments
5.1 Shape of the working part
5.2 Diameter of the working part
5.3 Neck diameter
5.4 Dimensions of the shank and the mandrel
5.5 Length of the working part
5.6 Overall length
5.7 Angle of the taper of the working part
5.8 Run-out of the working part
5.9 Neck strength
5.10 Surface roughness
Bibliography
Provides statement of test methods for the instruments such as burrs, cutters, diamond instruments and abrasives.
| Committee |
CH/106
|
| DevelopmentNote |
Supersedes BS 6828-9(1987). (09/2004) Supersedes 03/104329 DC (10/2004)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This International Standard specifies methods for measuring the dimensional characteristics, neck strength and surface roughness of dental rotary instruments, such as burs, cutters, polishers, diamond and abrasive instruments.
This International Standard does not provide test methods for the characteristics of materials used for dental rotary instruments.
NOTE For testing of these characteristics, see the respective product standards.
This International Standard is not applicable to dental root-canal instruments (see ISO3630-1).
| Standards | Relationship |
| ONORM EN ISO 8325 : 2004 | Identical |
| ISO 8325:2004 | Identical |
| EN ISO 8325:2004 | Identical |
| UNE-EN ISO 8325:2005 | Identical |
| NS EN ISO 8325 : 1ED 2004 | Identical |
| I.S. EN ISO 8325:2004 | Identical |
| NEN EN ISO 8325 : 2004 | Identical |
| SN EN ISO 8325 : 2005 | Identical |
| NBN EN ISO 8325 : 2004 | Identical |
| UNI EN ISO 8325 : 2005 | Identical |
| NF EN ISO 8325 : 2005 | Identical |
| DIN EN ISO 8325:2004-12 | Identical |
| ISO 1797-2:1992 | Dental rotary instruments Shanks Part 2: Shanks made of plastics |
| ISO 13295:2007 | Dentistry — Mandrels for rotary instruments |
| ISO 1797-1:2011 | Dentistry Shanks for rotary instruments Part 1: Shanks made of metals |
| ISO 6906:1984 | Vernier callipers reading to 0,02 mm |
| ISO 1942:2009 | Dentistry Vocabulary |
| ISO 3599:1976 | Vernier callipers reading to 0,1 and 0,05 mm |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| ISO 3611:2010 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
| ISO/R 463:1965 | Dial gauges reading in 0.01 mm, 0.001 in and 0.0001 in |
| ISO 3630-1:2008 | Dentistry Root-canal instruments Part 1: General requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.