BS EN ISO 5359 : 2014
Current
The latest, up-to-date edition.
ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
Hardcopy , PDF
English
01-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword to Amendment A1
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Test methods
6 Marking, colour coding and packaging
7 Information to be supplied by the manufacturer
Annex A (informative) - Rationale
Annex B (informative) - Environmental aspects
Annex C (informative) - Reported regional and
national deviations of colour coding and
nomenclature for medical gases
Bibliography
Annex ZA(informative) - Relationship
between this European Standard
and the essential requirements of
Directive 93/42/EEC [OJ L 169]
aimed to be covered
Describes requirements for low-pressure hose assemblies intended for use with the following medical gases: - oxygen; - nitrous oxide; - medical air; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - oxygen-enriched air; - oxygen 93; - nitrogen for driving surgical tools; and for use with vacuum.
| Committee |
CH/121/1
|
| DevelopmentNote |
Supersedes BS EN 739. (03/2009) 2014 Edition Re-issued in January 2018 & incorporates AMD 1 2017. (02/2018)
|
| DocumentType |
Standard
|
| Pages |
36
|
| ProductNote |
This standard is identical to EN ISO 5359 : 2014
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 5359:2014 | Identical |
| BS 5682:2015 | Dimensions of probes and terminal units for medical gas supply systems. Requirements |
| 14/30295295 DC : 0 | BS 5682 - SPECIFICATION FOR PROBES (QUICK CONNECTORS) FOR USE WITH MEDICAL GASPIPELINE SYSTEMS |
| EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| ISO 5774:2016 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
| ISO 80601-2-13:2011 | Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| EN 15986:2011 | Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates |
| CGSB 24.2 : M86 | IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| IEC TR 60788:2004 | Medical electrical equipment - Glossary of defined terms |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| EN ISO 1307:2008 | Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006) |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| CGA C 9 : 2013 | STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 80601-2-12:2011 | Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| ISO 11197:2016 | Medical supply units |
| EN 15908:2010 | Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| EN ISO 15001:2011 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
| CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| ISO 7751:2016 | Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
| AS 2896-2011 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
| ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| EN ISO 9170-1:2008 | Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) |
| AS 4484:2016 | Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 10524-1:2006 | Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| ISO 18082:2014 | Anaesthetic and respiratory equipment — Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.