BS EN ISO 4029:2003
Current
The latest, up-to-date edition.
Hexagon socket set screws with cup point
Hardcopy , PDF
English
19-12-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Dimensions
4 Requirements and reference International Standards
5 Designation
Annex ZA (normative) Normative references to international
publications with their relevant European
publications
Provides the characteristics of hexagon socket set screws with cup point and threads from M1,6 up to and including M24 and of product grade A.
| Committee |
FME/9
|
| DevelopmentNote |
Supersedes BS 4168-5(1994) (12/2003) Reviewed and confirmed by BSI, December 2008. (11/2008)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies the characteristics of hexagon socket set screws with cup point and threads from M1,6 up to and including M24 and of product grade A.
If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 898-5, ISO 965-2, ISO 3506-3 and ISO 4759-1.
| Standards | Relationship |
| NS EN ISO 4029 : 1ED 2004 | Identical |
| NEN EN ISO 4029 : 2004 | Identical |
| ISO 4029:2003 | Identical |
| EN ISO 4029:2003 | Identical |
| UNI EN ISO 4029 : 2005 | Identical |
| UNE-EN ISO 4029:2005 | Identical |
| I.S. EN ISO 4029:2004 | Identical |
| NF EN ISO 4029 : 2004 | Identical |
| SN EN ISO 4029 : 2004 | Identical |
| NBN EN ISO 4029 : 2004 | Identical |
| DIN EN ISO 4029:2004-05 | Identical |
| DEFSTAN 02-862(PT1)/3(2011) : 2011 | NAVAL FASTENERS - PART 1: MATERIAL SELECTION AND USE |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| ISO 8839:1986 | Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| EN 20225 : 1991 | FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESIGNATIONS OF DIMENSIONS |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| ISO 23429:2004 | Gauging of hexagon sockets |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| EN 26157-1:1991 | Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988) |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| EN ISO 23429:2004 | Gauging of hexagon sockets (ISO 23429:2004) |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| EN ISO 10683:2014 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| EN ISO 4759-1:2000 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000) |
| EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| EN 28839:1991 | Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986) |
| ISO 3269:2000 | Fasteners Acceptance inspection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.