BS EN 845-3 : 2013
Current
The latest, up-to-date edition.
SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL ESHWORK
Hardcopy , PDF
English
01-01-2013
European foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials and types of products
5 Requirements
6 Description and designation
7 Marking
8 Assessment and verification of constancy of
performance - AVCP
Annex A (informative) - Guidance on FPC frequencies
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Regulation
Bibliography
National Annex NA (informative) - Additional information
for the use of EN 845-3 in the UK
Describes the requirements for masonry bed joint reinforcement for structural use and for non-structural use.
Committee |
B/519/3
|
DevelopmentNote |
Supersedes 92/17575 DC. (09/2002) Supersedes 00/103734 DC (09/2003) Supersedes 12/30265759 DC. (08/2013) 2013 Edition Re-Issued in September 2016 & incorporates AMD 1 2016. (09/2016)
|
DocumentType |
Standard
|
Pages |
34
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNI EN 845-3 : 2013 | Identical |
UNE-EN 845-3:2006 | Identical |
NF EN 845-3 : 2013 + A1 2016 | Identical |
DIN EN 845-3:2013-08 | Identical |
EN 845-3:2013+A1:2016 | Identical |
NBN EN 845-3 : 2013 | Identical |
NEN EN 845-3 : 2013 + A1 2016 | Identical |
NS EN 845-3 : 2013 + A1 2016 | Identical |
SN EN 845-3 : 2013 + A1 2016 | Identical |
I.S. EN 845-3:2013 | Identical |
DIN EN 845-3:2003-08 | Identical |
05/30136143 DC : DRAFT JUL 2005 | BS 5628-2 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
BS EN 1996-1-1 NA : 2005 | UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
BS 8103-2:2013 | Structural design of low-rise buildings Code of practice for masonry walls for housing |
05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
EN 846-13:2001 | Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
ISO 12491:1997 | Statistical methods for quality control of building materials and components |
EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
EN 10020:2000 | Definition and classification of grades of steel |
ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
EN 846-2:2000 | Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
EN 846-3:2000 | Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.