BS EN 845-1 : 2013
Current
Current
The latest, up-to-date edition.
SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials
5 Requirements
6 Description and designation
7 Marking
8 Assessment and verification of constancy
of performance - AVCP
Annex A (normative) - Materials and protective
coatings
Annex B (informative) - Guidance on FPC
frequencies
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Regulation
Bibliography
National Annex NA (informative) - Additional information for
the use of EN 845-1 in the UK
Describes requirements for wall ties, tension straps, hangers and brackets for interconnecting masonry and for connecting masonry to other parts of works and buildings including walls, floors, beams, and columns.
| Committee |
B/519/3
|
| DevelopmentNote |
Supersedes 92/17573 DC.(09/2002) Supersedes 00/103732 DC.(12/2003) Supersedes BS 1243(1978), BS 6178-1(1990) & BS DD140-1(1986). (12/2004) Supersedes 12/30265756 DC.(08/2013) 2013 Edition Re-Issued in September 2016 & incorporates AMD 1 2016. Supersedes 16/30291090 DC. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 845-1:2013-10 | Identical |
| NEN EN 845-1 : 2013 + A1 2016 | Identical |
| SN EN 845-1 : 2013 + A1 2016 | Identical |
| UNE-EN 845-1:2005 | Identical |
| NF EN 845-1 : 2013 + A1 2016 | Identical |
| UNI EN 845-1 : 2013 | Identical |
| NS EN 845-1 : 2013 + A1 2016 | Identical |
| NBN EN 845-1 : 2013 | Identical |
| EN 845-1:2013+A1:2016 | Identical |
| I.S. EN 845-1:2013 | Identical |
| DIN EN 845-1:2003-08 | Identical |
| 05/30136143 DC : DRAFT JUL 2005 | BS 5628-2 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| 08/30140202 DC : 0 | BS 8103-3 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 3: CODE OF PRACTICE FOR TIMBER FLOORS AND ROOFS FOR HOUSING |
| BS 8002:2015 | Code of practice for earth retaining structures |
| 11/30214388 DC : 0 | BS 8103-1 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 1: CODE OF PRACTICE FOR STABILITY, SITE INVESTIGATION, FOUNDATIONS AND GROUND FLOOR SLABS FOR HOUSING |
| BS 8103-1:2011 | Structural design of low-rise buildings Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing |
| 04/30126043 DC : DRAFT DEC 2004 | BS 5628-1 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 1: STRUCTURAL USE OF UNREINFORCED MASONRY |
| 04/30104570 DC : DRAFT APR 2004 | BS 8103-2 - STRUCTURAL DESIGN OF LOW RISE BUILDINGS - PART 2: CODE OF PRACTICE FOR MASONRY WALLS FOR HOUSING |
| BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| BS 5628-1:2005 | Code of practice for the use of masonry Structural use of unreinforced masonry |
| BS 8103-3:2009 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
| 10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| 15/30301518 DC : 0 | BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
| BS 8103-2:2013 | Structural design of low-rise buildings Code of practice for masonry walls for housing |
| BS 8103-2:2005 | Structural design of low rise buildings Code of practice for masonry walls for housing |
| 13/30262014 DC : 0 | BS 8103-2 - STRUCTURAL DESIGN OF LOW RISE BUILDINGS - PART 2: CODE OF PRACTICE FOR MASONRY WALLS FOR HOUSING |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| EN 846-13:2001 | Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN 846-9:2016 | Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 846-14:2012 | Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| ISO 428:1983 | Wrought copper-aluminium alloys — Chemical composition and forms of wrought products |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 846-7:2012 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
| EN 846-10:2000 | Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| ISO 2039-2:1987 | Plastics — Determination of hardness — Part 2: Rockwell hardness |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| EN 846-5:2012 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
| ISO 427:1983 | Wrought copper-tin alloys Chemical composition and forms of wrought products |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 846-2:2000 | Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
| EN 846-3:2000 | Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement |
| EN 846-11:2000 | Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| EN ISO 2039-2:1999 | Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
| ISO 431:1981 | Copper refinery shapes |
| EN 846-6:2012 | Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.