BS EN 746-4:2000
Current
The latest, up-to-date edition.
Industrial thermoprocessing equipment Particular safety requirements for hot dip galvanizing thermoprocessing equipment
Hardcopy , PDF
English
15-04-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
0 INTRODUCTION
1 SCOPE
2 NORMATIVE REFERENCES
3 DEFINITIONS
4 LIST OF HAZARDS
5 SAFETY REQUIREMENTS AND/OR MEASURES
5.1 General
5.2 Uncontrolled immersion or spillage of
liquids into or onto the molten metal
5.3 Leakage or spillage of molten metal
5.4 Overheating of the molten metal
5.5 Hazard by chemical materials and substances
5.6 Falls into molten metal (only for batch
processes)
5.7 Ergonomic requirements
6 VERIFICATION OF SAFETY REQUIREMENTS AND/OR
MEASURES
7 INFORMATION FOR USE
7.1 General
7.2 Specific information to be provided
ANNEX A (INFORMATIVE) Examples for hot dip galvanizing
thermoprocessing equipment
ANNEX ZA (INFORMATIVE) Clauses of this European
Standard addressing essential requirements or
other provisions of EU Directives
Defines specific safety requirements and hazards to be provided by the manufacturer for hot dip industrial batch and the bath of continuous galvanizing thermoprocessing equipment, when it is used as an integrated part of a plant, or an independent unit. Not applicable to the risks arising from any component handling equipment for the dip process or any associated protective measures. Does not cover storage, handling, disposal, transport, transfer or regeneration of the zinc and processed material that is not within the limits of the equipment. Covers the safety of personnel during normal operation and abnormal operation, and also when foreseeable faults occur.
| Committee |
MCE/3/8
|
| DevelopmentNote |
Supersedes 94/710481 DC (09/2005)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for Hot Dip Industrial Batch and the Bath of Continuous Galvanising Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant. This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the zinc and the processed material outside the limits of the equipment. This part of EN 746 does not deal with the risks arising from any component handling equipment for the dip process or for the associated protective measures
| Standards | Relationship |
| NBN EN 746-4 : 2000 | Identical |
| NF EN 746-4 : 2000 | Identical |
| UNE-EN 746-4:2000 | Identical |
| SN EN 746-4 : 2000 | Identical |
| NS EN 746-4 : 1ED 2000 | Identical |
| EN 746-4:2000 | Identical |
| DIN EN 746-4:2000-05 | Identical |
| NEN EN 746-4 : 2000 | Identical |
| UNI EN 746-4 : 2002 | Identical |
| I.S. EN 746-4:2000 | Identical |
| EN 746-1:1997+A1:2009 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 346:1992/A1:1997 | SPECIFICATION FOR PROTECTIVE FOOTWEAR FOR PROFESSIONAL USE |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| EN 1093-4:1996+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method |
| EN 166:2001 | Personal eye-protection - Specifications |
| EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
| EN 345:1992/A1:1997 | SPECIFICATION FOR SAFETY FOOTWEAR FOR PROFESSIONAL USE |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN 531:1995/A1:1998 | PROTECTIVE CLOTHING FOR INDUSTRIAL WORKERS EXPOSED TO HEAT |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.