BS EN 624:2011
Current
The latest, up-to-date edition.
Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
Hardcopy , PDF
English
31-03-2011
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Requirements
5 Safety, constructional and performance
characteristics
6 Test methods
7 Marking and instruction literature
Annex A (normative) - Supply situation in various countries
Annex B (normative) - Appliances using water as a heat
transfer medium
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2009/142/EC 'Gas appliances'
Bibliography
Defines the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of type C with combustion air intake and outlet for the products of combustion in the wall, roof or floor, combined or not.
Committee |
GSE/24
|
DevelopmentNote |
Supersedes 92/70112 DC (08/2005) Supersedes 09/30201902 DC. (03/2011) Reviewed and confirmed by BSI, November 2016. (11/2016)
|
DocumentType |
Standard
|
Pages |
62
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of type C (see CEN/TR 1749) with combustion air intake and outlet for the products of combustion in the wall, roof or floor, combined or not. These are referred to in the body of the text as \'heaters\', burning LPG, for vehicles and boats. This European standard only covers room sealed heaters also including those which have a combustion air fan, an integral hot air fan or both, only for vehicles and boats which are used for residential, recreational and commercial purposes. This European standard applies to heaters which are installed either outside or inside the habitable volume, but which have a combustion circuit sealed from the vehicle\'s interior, and nominal heat input which does not exceed 10 kW (Hs) operated at supply pressure of 30 mbar, 28 mbar, 37 mbar and 50 mbar, using, where appropriate, 12 V or 24 V DC electrical supply. Room sealed LPG space heating appliances for vehicles and boats are using very often warm air as a heat transfer medium. Annex B specifies additional requirements for appliances using water as a heat transfer medium. For private cars and vehicles or boats used for the transport of dangerous goods or for commercial personnel transport additional requirements may be necessary. This European standard does not cover requirements for storage water heaters (boilers) (see EN 15033). For appliances producing additional sanitary hot water (combi-boilers), see relevant clauses of EN 15033. NOTE If a LPG operated heater is installed in a motorized vehicle being subject to European road traffic legislation, the directives of the Council for the approximation of the laws, regulations and administrative provisions of the member states relating to the heating of the interior of motor vehicles should be applied. These heaters are also suitable for caravan holiday homes.
Standards | Relationship |
NEN EN 624 : 2011 | Identical |
DIN EN 624:2011-10 | Identical |
NS EN 624 : 2011 | Identical |
UNI EN 624 : 2011 | Identical |
SN EN 624:2011 | Identical |
NBN EN 624 : 2011 | Identical |
UNE-EN 624:2011 | Identical |
NF EN 624 : 2011 | Identical |
EN 624:2011 | Identical |
I.S. EN 624:2011 | Identical |
15/30281782 DC : 0 | PD 5482-3 - GUIDANCE FOR THE DESIGN, COMMISSIONING AND MAINTENANCE OF LPG SYSTEMS IN SMALL CRAFT |
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
IEC 60335-2-21:2012 | Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
2009/142/EC : 2009 | DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 30 NOVEMBER 2009 RELATING TO APPLIANCES BURNING GASEOUS FUELS (TEXT WITH EEA RELEVANCE) |
EN 13878:2003 | Leisure accommodation vehicles - Terms and definitions |
EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN 60335-2-21:2003/corrigendum Oct. 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS |
EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
EN 1949:2011+A1:2013 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN 751-1:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.