BS EN 62252:2004
Current
The latest, up-to-date edition.
Maritime navigation and radiocommunication equipment and systems. Radar for craft not in compliance with IMO SOLAS Chapter V. Performance requirements methods of test and required test results
Hardcopy , PDF
English
13-12-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
INTRODUCTION
1 Scope
2 Normative references
3 Definitions and abbreviations
3.1 Definitions
3.2 Abbreviations
4 Performance requirements
4.1 Radar indication
4.2 Safety of options
4.3 Technical information
4.4 Quality assurance
4.5 Radio-frequency spectrum requirements
4.6 Range
4.7 Display
4.8 Frequency band
4.9 Range markers
4.10 Range measurement using range rings and VRM
4.11 Heading line
4.12 Electronic bearing line (EBL)
4.13 Bearing scale
4.14 Discrimination
4.15 Antenna radiation pattern
4.16 Roll or pitch performance
4.17 Antenna scan
4.18 Modes
4.19 Tuning indication
4.20 Anti-clutter devices
4.21 Range performance in clutter
4.22 Operation
4.23 Controls
4.24 Manual speed set and drift input
4.25 Interference from external magnetic fields
4.26 Radar installation
4.27 Failure warnings (alarms) and status indication
4.28 Interfacing
4.29 Navigational information
4.30 Ergonomics
4.31 Display of information
4.32 Safety precautions
4.33 Spurious/unwanted frequency emissions (Annex D)
5 Methods of test and required test result
5.1 Radar indication
5.2 Safety of options
5.3 Technical information
5.4 Quality assurance
5.5 Radio-frequency spectrum requirements
5.6 Range
5.7 Display
5.8 Frequency band
5.9 Range markers
5.10 Range measurement using range rings and VRM
5.11 Heading line
5.12 Electronic bearing line (EBL)
5.13 Bearing scale
5.14 Discrimination
5.15 Antenna radiation pattern
5.16 Roll and pitch performance
5.17 Antenna scan
5.18 Modes
5.19 Tuning indication
5.20 Anti-clutter devices
5.21 Range performance in clutter
5.22 Operation
5.23 Controls
5.24 Manual speed set and drift
5.25 Interference from external magnetic fields
5.26 Radar installation
5.27 Failure warnings (alarms) and status indications
5.28 Interfacing
5.29 Navigational information
5.30 Ergonomics
5.31 Display of information
5.32 Safety precautions
5.33 Spurious/unwanted frequency emissions
Annex A (normative) Method for relating the radar cross-section
(echoing area) of one radar target with another
Annex B (normative) Standard names, abbreviations and symbols
for control functions on marine navigational radar
equipment (as referenced by IEC 60945)
Annex C (normative) Guidelines for the display of navigational
information on radar by means of radar maps
Annex D (normative) Unwanted emissions of radar systems
- Methods of measurement and required results
Annex E (normative) General requirements - Method of test and
required results
Annex F (normative) Automatic tracking device (ATD) - Methods
of testing and required test results - Class A only
Annex G (normative) Electronic plotting device (EPD) Class A
only
Annex H (normative) Electronic plotting video symbols (EPVS)
Annex I (informative) Performance checks during environmental
testing
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Covers the minimum performance requirements for testing and required test results for conformance of radar not fully compliant with the IMO Performance Standard for radar/radar plotting (RP) (MSC.64(67)).
| Committee |
EPL/80
|
| DevelopmentNote |
Supersedes 03/303496 DC. (12/2004)
|
| DocumentType |
Standard
|
| Pages |
150
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
IEC 62252:2004 Specifies the minimum performance requirements for testing and required test results for conformance of radar not fully compliant with the IMO Performance Standard for radar/radar plotting (MSC.64(67)). Covers radar classes A, B and C. Is based on IEC 60872, IEC 60936 and takes into account IEC 60945.
| Standards | Relationship |
| NBN EN 62252 : 2005 | Identical |
| NF EN 62252 : 2005 | Identical |
| IEC 62252:2004 | Identical |
| EN 62252:2004 | Identical |
| DIN EN 62252:2005-06 | Identical |
| I.S. EN 62252:2004 | Identical |
| IEC 60872-2:1999 | Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 2: Automatic tracking aids (ATA) - Methods of testing and required test results |
| ISO 694:2000 | Ships and marine technology Positioning of magnetic compasses in ships |
| ISO 3791:1976 | Office machines and data processing equipment — Keyboard layouts for numeric applications |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| EN ISO 694 : 2001 | SHIPS AND MARINE TECHNOLOGY - POSITIONING OF MAGNETIC COMPASSES IN SHIPS |
| EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| IEC 61108-1:2003 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results |
| EN 60936-1 : 2000 AMD 1 2002 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR - PART 1: SHIPBORNE RADAR - PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| IEC PAS 60936-5:2003 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 5: Guidelines for the use and display of AIS information on radar |
| EN 61108-1:2003 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results |
| IEC 61108-4:2004 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 60936-1:1999+AMD1:2002 CSV | Maritime navigation and radiocommunication equipment and systems - Radar - Part 1: Shipborne radar - Performance requirements - Methods of testing and required test results |
| IEC 60936-2:1998 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 2: Shipborne radar for high-speed craft (HSC) - Methods of testing and required test results |
| EN 60872-3:2001 | Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3: Electronic plotting aid (EPA) - Performance requirements - Methods of testing and required test results |
| EN 60936-2:1999 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 2: Shipborne radar for high-speed craft (HSC) - Methods of testing and required test results |
| IEC 60533:2015 | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
| IEC 60872-3:2000 | Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3: Electronic plotting aid (EPA) - Performance requirements - Methods of testing and required test results |
| EN 60936-3:2002 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 3: Radar with chart facilities - Performance requirements - Methods of testing and required test results |
| IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
| EN 60071-2:1997 | Insulation co-ordination - Part 2: Application guide |
| EN 60872-2:1999 | Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 2: Automatic tracking aids (ATA) - Methods of testing and required test results |
| IEC 60936-3:2002 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 3: Radar with chart facilities - Performance requirements - Methods of testing and required test results |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 60092-101:1994+AMD1:1995 CSV | Electrical installations in ships - Part 101: Definitions and general requirements |
| IEC 61108-2:1998 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| EN 61108-2:1998 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.