BS EN 62237:2005
Current
The latest, up-to-date edition.
Live working. Insulating hoses with fittings for use with hydraulic tools and equipment
Hardcopy , PDF
English
04-11-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Protection against corrosion
4.2 Finishing and mechanical protection
4.3 Insulating parts
4.4 Conductive parts
4.5 Markings
4.6 Instructions for use
5 Type tests
5.1 General
5.1.1 Preparation of test pieces
5.1.2 Number of test pieces and test plan
5.2 Visual inspection and dimensional check
5.2.1 Visual inspection
5.2.2 Dimensional check
5.3 Electric tests
5.3.1 Electric tests on insulating hoses
5.3.2 Dielectric test on insulating hose with fittings
5.4 Mechanical tests
5.4.1 Hydrostatic test
5.4.2 Fatigue test
5.4.3 Mechanical impulse test
5.4.4 Leakage test
5.4.5 Change in length test
5.4.6 Burst test
5.4.7 Cold bend test
5.4.8 Durability of marking
6 Quality assurance plan
7 Modifications
Annex A (normative) Suitable for live working; double triangle
(IEC-60417-5216(DB:2002-10))
Annex B (normative) Chronology of the tests
Annex C (normative) Quality assurance plan
Annex D (normative) Acceptance tests
Annex E (informative) In-service care
Annex ZA (normative) Normative references to international
Publications with their corresponding
European publications
Bibliography
Applies to mobile insulating hoses with fittings used with hydraulic tools and equipment for live working at nominal voltages exceeding 1 kV r.m.s. at power frequency.
| Committee |
PEL/78
|
| DevelopmentNote |
Supersedes 02/206916 DC. (11/2005)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
Is applicable to mobile insulating hoses with fittings used with hydraulic tools and equipment for live working at nominal voltages exceeding 1 kV r.m.s. at power frequency. Insulating hoses with fittings are used to provide a connection between the hydraulic tool and the pump which are at different potentials. They are not considered as a fixed component of a live working device (e.g. aerial device). They can be connected and disconnected under negligible pressure. They can be directly handled by the user.
| Standards | Relationship |
| DIN EN 62237 : 2005 | Identical |
| EN 62237:2005 | Identical |
| UNE-EN 62237:2006 | Identical |
| NF EN 62237 : 2005 | Identical |
| NBN EN 62237 : 2006 | Identical |
| I.S. EN 62237:2005 | Identical |
| IEC 62237:2003 | Identical |
| IEC 61477:2009 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems |
| IEC 60212:2010 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| HD 437 : 200S1 | STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS |
| IEC 60743:2013 | Live working - Terminology for tools, devices and equipment |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| EN 60060-2:2011 | High-voltage test techniques - Part 2: Measuring systems |
| EN 61477:2009/corrigendum:2010 | LIVE WORKING - MINIMUM REQUIREMENTS FOR THE UTILIZATION OF TOOLS, DEVICES AND EQUIPMENT |
| IEC 60050-651:2014 | International Electrotechnical Vocabulary (IEV) - Part 651: Live working |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.