BS EN 622-5:2009
Current
The latest, up-to-date edition.
Fibreboards. Specifications Requirements for dry process boards (MDF)
Hardcopy , PDF
English
31-05-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Verification of compliance
6 Supplementary properties
7 Marking
Annex A (normative) - Boil test according to
EN 1087-1 - Modified procedure
Bibliography
Describes the requirements for dry process boards (MDF) as defined in EN 316.
| Committee |
B/541
|
| DevelopmentNote |
Supersedes BS 1142(1989) (12/2003) Supersedes 93/101937 DC. (09/2005) Supersedes 04/30112438 DC. (09/2006) Supersedes 08/30181443 DC. (05/2010)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the requirements for dry process boards (MDF) as defined in EN316.
The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations1.
| Standards | Relationship |
| UNI EN 622-5 : 2010 | Identical |
| NF EN 622-5 : 2009 | Identical |
| NEN EN 622-5 : 2009 | Identical |
| UNE-EN 622-5:2010 | Identical |
| SN EN 622-5 : 2009 | Identical |
| DIN EN 622-5:2010-03 | Identical |
| NBN EN 622-5 : 2010 | Identical |
| NS EN 622-5 : 2009 | Identical |
| EN 622-5:2009 | Identical |
| I.S. EN 622-5:2009 | Identical |
| 01/122607 DC : DRAFT JULY 2001 | BS 5325 - CODE OF PRACTICE FOR INSTALLATION OF TEXTILE FLOOR COVERINGS |
| BS 1133-8(2011) : 2011 | PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES |
| BS 8203(2001) : 2001 | CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
| 11/30197409 DC : DRAFT JULY 2011 | BS 1133-8 - PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES - SECTION 8: WOODEN BOXES, CASES AND CRATES |
| BS 5268-2:2002 | Structural use of timber Code of practice for permissible stress design, materials and workmanship |
| BS 4965:1999 | Decorative laminated plastics sheet veneered boards and panels |
| 09/30174199 DC : 0 | BS 8203:2001+A1:2009 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
| BS 5325:2001 | Installation of textile floor coverings. Code of practice |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN 382-1:1993 | Fibreboards - Determination of surface absorption - Part 1: Test method for dry process fibreboards |
| EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
| EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
| EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| ENV 12872 : DRAFT 2000 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 311:2002 | Wood-based panels - Surface soundness - Test method |
| EN 14964:2006 | Rigid underlays for discontinuous roofing - Definitions and characteristics |
| ISO 3340:1976 | Fibre building boards — Determination of sand content |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.