BS EN 622-2:2004
Current
Current
The latest, up-to-date edition.
Fibreboards. Specifications Requirements for hardboards
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
30-11-2006
Publisher
$343.75
Including GST where applicable
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Requirements for general purpose boards
4.3 Requirements for load-bearing boards
5 Verification of compliance
5.1 General
5.2 External control
5.3 Factory production control
6 Marking
6.1 General purpose boards
6.2 Load-bearing boards
6.3 Colour coding
Annex A (normative) Supplementary properties
Annex B (normative) Boil test according to EN 1087-1:1995 -
Modified procedure
Annex C (normative) Determination of bending strength after
boil test according to EN 1087-1:1995 -
Modified procedure
Bibliography
Defines requirements for hardboards, relating to product properties, but not characteristic values for use in design calculations.
| Committee |
B/541
|
| DevelopmentNote |
Supersedes BS 1142(1989) (12/2003) Supersedes 93/101934 DC. (09/2005) Supersedes 03/315086 DC (11/2006)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 622-2 : 2004 COR 2005 | Identical |
| DIN EN 622-2:2004-07 | Identical |
| NS EN 622-2 : 2004 AC 2006 | Identical |
| NF EN 622-2 : 2004 | Identical |
| I.S. EN 622-2:2004 | Identical |
| NEN EN 622-2 : 2004 C1 2006 | Identical |
| EN 622-2:2004/AC:2005 | Identical |
| EN 622-2:2004 | Equivalent |
| UNE-EN 622-2:2004 | Identical |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| DEFSTAN 61-12(PT25)/4(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10 MM[2] CROSS SECTIONAL AREA |
| BS 1133-8(2011) : 2011 | PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES |
| BS 8203:2017 | Code of practice for installation of resilient floor coverings |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 8203(2001) : 2001 | CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
| DEFSTAN 61-12(PT9)/5(2008) : 2008 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 9: CABLES AND WIRES ELECTRICAL FOR CABLES, RADIO FREQUENCY INCLUDING LIMITED FIRE HAZARD (LFH) VARIANTS |
| DEFSTAN 61-12(PT18)/5(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 18: EQUIPMENT WIRES LIMITED FIRE HAZARD |
| DEFSTAN 61-12(PT5)/5(2008) : 2008 | WIRES, CORDS AND CABLES, ELECTRICAL-METRIC UNITS - PART 5: CABLES, SPECIAL PURPOSE, ELECTRICAL AND CABLES, POWER, ELECTRICAL (SMALL MULTI-CORE CABLES) |
| 11/30197409 DC : DRAFT JULY 2011 | BS 1133-8 - PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES - SECTION 8: WOODEN BOXES, CASES AND CRATES |
| DEFSTAN 61-12(PT25)/5(2010) : 2010 | WIRES, CORDS AND CABLES ELECTRICAL - PART 25: WIRES AND CABLES ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10MM[2] CROSS SECTIONAL AREA |
| DEFSTAN 02-643/3(2010) : 2010 | REQUIREMENTS FOR CABLES ELECTRICAL, SUB-MINIATURE AND SMALL MULTI-CORE, LIMITED FIRE HAZARD FOR SPECIAL PURPOSE |
| BS 5268-2:2002 | Structural use of timber Code of practice for permissible stress design, materials and workmanship |
| BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
| BS 4965:1999 | Decorative laminated plastics sheet veneered boards and panels |
| BS 5268-6.2(2001) : 2001 | STRUCTURAL USE OF TIMBER - PART 6: CODE OF PRACTICE FOR TIMBER FRAME WALLS - SECTION 6.2: BUILDINGS OTHER THAN DWELLINGS NOT EXCEEDING FOUR STOREYS |
| 11/30209204 DC : 0 | BS 8201 - CODE OF PRACTICE FOR INSTALLATION OF FLOORING OF WOOD AND WOOD-BASED PANELS |
| 09/30174199 DC : 0 | BS 8203:2001+A1:2009 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
| BS 5268-6.1:1996 | Structural use of timber Code of practice for timber frame walls - Dwellings not exceeding seven storeys |
| PD 6693-1:2012 | Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings |
| 01/122607 DC : DRAFT JULY 2001 | BS 5325 - CODE OF PRACTICE FOR INSTALLATION OF TEXTILE FLOOR COVERINGS |
| 16/30348805 DC : 0 | BS 8203 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS |
| 08/30154716 DC : DRAFT DEC 2008 | BS 5268-6-2 AMD1 - STRUCTURAL USE OF TIMBER - PART 6-2: CODE OF PRACTICE FOR TIMBER FRAME WALLS - BUILDINGS OTHER THAN DWELLINGS NOT EXCEEDING 4 STOREYS |
| DEFSTAN 61-12(PT25)/3(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 2.5 MM[2] CROSS SECTIONAL AREA |
| BS 5325:2001 | Installation of textile floor coverings. Code of practice |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 382-2:1993 | Fibreboards - Determination of surface absorption - Part 2: Test method for hardboards |
| EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
| EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
| EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| ISO 3340:1976 | Fibre building boards — Determination of sand content |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.