BS EN 61162-1:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Maritime navigation and radiocommunication equipment and systems. Digital interfaces Single talker and multiple listeners
Hardcopy , PDF
24-05-2024
English
31-01-2017
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Manufacturer's documentation
5 Hardware specification
6 Data transmission
7 Data format protocol
8 Data content
9 Applications
Annex A (informative) - Glossary
Annex B (normative) - Guidelines for methods of
testing and required test results
Annex C (normative) - Six-bit binary field conversion
Annex D (normative) - Alarm system fields
Annex E (informative) - Example of use of FIR, DOR
and WAT sentences
Annex F (informative) - Example encapsulation sentence
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Specifies the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system.
Committee |
EPL/80
|
DevelopmentNote |
Supersedes 98/233429 DC. (05/2005) Supersedes 05/30143950 DC. (05/2008) Supersedes 09/30214168 DC. (02/2011) 2011 Edition remains active & will be withdrawn on 05/10/2019. Supersedes 15/30324689 DC. (01/2017)
|
DocumentType |
Standard
|
Pages |
182
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
IEC 61162-1:2016 is available as IEC 61162-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61162-1:2016 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. For applications to shore based equipment of the automatic identification system (AIS) reference should be made to the IEC 62320 series. This fifth edition cancels and replaces the fourth edition published in 2010, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- new identifiers have been added to Table 4;
- the sentences CBR and MEB have been removed as they are now solely used by AIS shore based equipment;
- new sentences ACN, ALC, ALF, ARC, EPV, HCR, HRM, MOB, NSR, RLM, RRT, SM1, SM2, SM3, SM4, SMB, SPW and TRL have been added;
- revisions have been made to ABK, ABM, GNS, NAK, NRM, RMC, ROR and TTD;
- the methods of testing in Annex B have been revised.
Standards | Relationship |
IEC 61162-1:2016 | Identical |
I.S. EN 61162-1:2016 | Identical |
DIN EN 61162-1:2015-11 (Draft) | Identical |
NF EN 61162-1 : 2014 | Identical |
EN 61162-1:2016 | Identical |
NBN EN 61162-1 : 2011 | Identical |
SN EN 61162-1 : 2016 | Identical |
EN 60684-3-205:2011 | Identical |
EN 61924-2:2013 | Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results |
EN 62320-3:2015 | Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 3: Repeater stations - Minimum operational and performance requirements - Methods of test and required test results |
IEC 61174:2015 | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results |
ISO 8728:2014 | Ships and marine technology — Marine gyro-compasses |
EN 61023:2007 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - MARINE SPEED AND DISTANCE MEASURING EQUIPMENT (SDME) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
ISO 20673:2007 | Ships and marine technology Electric rudder angle indicators |
IEC 62320-3:2015 | Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 3: Repeater stations - Minimum operational and performance requirements - Methods of test and required test results |
IEC 61097-1:2007 | Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods of testing and required test results |
IEC 62320-2:2016 | Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AIS AtoN Stations - Operational and performance requirements, methods of testing and required test results |
ISO/IEC 8859-1:1998 | Information technology 8-bit single-byte coded graphic character sets Part 1: Latin alphabet No. 1 |
ISO 22554:2015 | Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type |
ISO/IEC 10646:2014 | Information technology Universal Coded Character Set (UCS) |
IEC 62388:2013 | Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results |
IEC 62288:2014 | Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results |
IEC 61097-4:2012+AMD1:2016 CSV | Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods oftesting and required test results |
IEC 61097-7:1996 | Global maritime distress and safety system (GMDSS) - Part 7: Shipborne VHF radiotelephone transmitter and receiver - Operational and performance requirements, methods of testing and required test results |
IEC 62287-2:2017 | Maritime navigation and radiocommunication equipment and systems - Class B shipborne equiment of the automatic identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques |
IEC 61993-2:2012 | Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results |
IEC 62287-1:2017 | Maritime navigation and radiocommunication equipment and systems - Class B shipborne equiment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques |
IEC 61996-1:2013 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results |
IEC 61075:1991 | Loran-C receivers for ships - Minimum performance standards - Methods of testing and required test results |
EN 62287-1:2017 | Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques |
IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
EN ISO 11606:2001 | Ships and marine technology - Marine electromagnetic compasses (ISO 11606:2000) |
ISO 25862:2009 | Ships and marine technology Marine magnetic compasses, binnacles and azimuth reading devices |
IEC 61097-2:2008 | Global maritime distress and safety system (GMDSS) - Part 2: COSPAS-SARSAT EPIRB - Satellite emergency position indicating radio beacon operating on 406 MHz - Operational and performance requirements, methods of testing and required test results |
ISO 22090-1:2014 | Ships and marine technology — Transmitting heading devices (THDs) — Part 1: Gyro-compasses |
EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
ISO 22090-3:2014 | Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles |
IEC 61108-1:2003 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results |
EN 62252:2004 | Maritime navigation and radiocommunication equipment and systems - Radar for craft not in compliance with IMO SOLAS Chapter V - Performance requirements, methods of test and required test results |
ISO 11606:2000 | Ships and marine technology Marine electromagnetic compasses |
EN 61108-1:2003 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results |
EN 62287-2:2017 | Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques |
IEC 61097-3:2017 | Global maritime distress and safety system (GMDSS) - Part 3: Digital selective calling (DSC) equipment - Operational and performance requirements, methods of testing and required test results |
EN 62320-2:2017 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - AUTOMATIC IDENTIFICATION SYSTEM (AIS) - PART 2: AIS ATON STATIONS - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 62320-2:2016) |
IEC 61023:2007 | Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results |
EN 61996-1 : 2013 COR 2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61996-1:2013) |
ISO 22090-2:2014 | Ships and marine technology — Transmitting heading devices (THDs) — Part 2: Geomagnetic principles |
IEC 61108-4:2004 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results |
IEC 62252:2004 | Maritime navigation and radiocommunication equipement and systems - Radar for craft not in compliance with IMO SOLAS Chapter V - Performance requirements, methods of test and required test results |
ISO 9875:2000 | Ships and marine technology — Marine echo-sounding equipment |
EN 61097-1:2007 | Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods of testing and required test results |
EN 62388:2013/AC:2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE RADAR - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
IEC 62065:2014 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results |
IEC 61097-8:1998 | Global maritime distress and safety system (GMDSS) - Part 8: Shipborne watchkeeping receivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHF bands - Operational and performance requirements, methods of testing and required test results |
EN 61108-3:2010 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results |
IEC 61097-6:2005+AMD1:2011 CSV | Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) |
ISO 20672:2007 | Ships and marine technology Rate of turn indicators |
ISO 22555:2007 | Ships and marine technology Propeller pitch indicators |
IEC 62320-1:2015 | Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results |
EN 61993-2:2013 | Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results |
EN 61108-4:2004 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results |
ISO 11674:2006 | Ships and marine technology Heading control systems |
IEC 61097-9:1997 | Global maritime distress and safety system (GMDSS) - Part 9: Shipborne transmitters and receivers for use in the MF and HF bands suitable for telephony, digital selective calling (DSC) and narrow band direct printing (NBDP) - Operational and performance requirements, methods of testing and required test results |
IEC 61996-2:2007 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results |
EN 61174:2015 | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results |
IEC 61162-2:1998 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission |
EN 62320-1:2015 | Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results |
IEC 61108-2:1998 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results |
EN 61162-2:1998 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission |
EN 62065:2014 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results |
IEC 61097-13:2003 | Global maritime distress and safety system (GMDSS) - Part 13: Inmarsat F77 ship earth station equipment - Operational and performance requirements, methods of testing and required test results |
IEC 61108-3:2010 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results |
ISO 10596:2009 | Ships and marine technology Marine wind vane and anemometers |
EN 62320-2:2017 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - AUTOMATIC IDENTIFICATION SYSTEM (AIS) - PART 2: AIS ATON STATIONS - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 62320-2:2016) |
EN 61996-2:2008 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results |
EN 61108-2:1998 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results |
EN 62288:2014 | Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.