Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 607:2004

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing

Available format(s)

Hardcopy , PDF

Superseded date

26-05-2023

Superseded by

BS EN 607:2023

Language(s)

English

Published date

26-09-2005

$443.41
Including GST where applicable

Foreword
1 Scope
2 Normative references
3 Terms and definitions
   3.1 eaves gutter
   3.2 down-pipe
   3.3 union-clip (gutter-union)
   3.4 joint bracket (union-bracket)
   3.5 gutter adaptor
   3.6 angle
   3.7 stop end
   3.8 outlet
   3.9 commercial length
4 Material
   4.1 Raw material
   4.2 Utilisation of non virgin material
5 General characteristics of profiles - Appearance
6 Geometrical characteristics of profiles
   6.1 Width
   6.2 Length
7 Physical and mechanical characteristics of profiles
8 General characteristics of fittings
   8.1 General
   8.2 Appearance
   8.3 Shape and dimensions
9 Physical characteristics of fittings
10 Gutter sealing rings
11 Solvent cements
12 Designation
13 Marking
14 Fitness for purpose of gutter systems
15 Production control
Annex A (normative) Utilisation of non-virgin material
      A.1 Material definitions
          A.1.1 virgin material
          A.1.2 own reprocessable material
          A.1.3 external reprocessable material
          A.1.4 recyclable material
      A.2 Reprocessable and recyclable material
          A.2.1 Own reprocessable material
          A.2.2 External reprocessable and recyclable
                materials with agreed specification
          A.2.3 External reprocessable and recyclable
                material not covered by an agreed
                specification
Annex B (normative) Impact test
Annex C (normative) Heat reversion test for fittings
Annex D (normative) Watertightness test
Annex E (informative) Cross section areas
Bibliography

Specifies requirements and test methods of eaves gutters and fittings made from unplasticized polyvinyl chloride (PVC-U) and intended to be used for rainwater drainage.

Committee
PRI/88
DevelopmentNote
Supersedes 92/37684 DC. (08/2004) Together with BS EN 12200-1 and BS EN 1462, supersedes BS 4576-1(1989). (10/2007)
DocumentType
Standard
Pages
24
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
ONORM EN 607 : 2005 Identical
UNI EN 607 : 2005 Identical
NBN EN 607 : 2005 Identical
UNE-EN 607:2006 Identical
NS EN 607 : 2ED 2004 Identical
EN 607:2004 Identical
DIN EN 607:2005-02 Identical
NF EN 607 : 2005 Identical
SN EN 607 : 2004 Identical
I.S. EN 607:2004 Identical
NEN EN 607 : 2004 Identical

BS 5534(2014) : 2014 SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE
BS 5534(2003) : 2003 CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES)
13/30271503 DC : 0 BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE
02/105033 DC : DRAFT AUG 2002 BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES)

EN 12200-1:2016 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
ISO 8256:2004 Plastics — Determination of tensile-impact strength
EN 743 : 1994 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF THE LONGITUDINAL REVERSION
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN 763 : 1994 PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING
EN 922:1994 Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 4892-3:2016 Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
ISO 1183-3:1999 Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
EN 638 : 1994 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES
EN 20105-A02:1994 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
EN 1905:1998 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more