BS EN 60335-2-8 : 2015
Current
The latest, up-to-date edition.
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES
Hardcopy , PDF
English
01-01-2016
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
12 Void
13 Leakage current and electric strength at
operating temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and
associated circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible
cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances creepage distances and
solid insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation toxicity and similar hazards
Annexes
Annex A (informative) - Routine tests
Annex AA (normative) - Combination microwave ovens
Annex BB (normative) - Microwave ovens intended to be
used on board ships
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Gives additional requirements concerning appliances and machines intended to be used by expert or trained users in shops, in hairdressers, in light industry, on farms and appliances and machines which are declared to be for commercial use by lay persons.
Committee |
CPL/61/1
|
DevelopmentNote |
Supersedes 02/208579 DC, 99/245348 DC, 94/215907 DC, 98/202052 DC & 99/243052 DC. (07/2003) Supersedes 04/30109958 DC.(05/2006) Supersedes 07/30172269 DC. (06/2009) 2003 + A2 2008 Edition remains active. Supersedes 12/30258805 DC.(04/2016) 2015 Edition remains active & will be withdrawn on 28/12/2018.2015 Edition Re-Issued in April 2016 & incorporates AMD 1 2016(04/2016) Supersedes 15/30320636 DC.(05/2016)
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 60335-2-8:2015 | Identical |
IEC 60335-2-8:2012+AMD1:2015 CSV | Identical |
NEN EN 60335-2-8 : 1995 | Identical |
UNE-EN 60335-2-8:2016 | Identical |
IEC 60335-2-98:2002+AMD1:2004+AMD2:2008 CSV | Identical |
SN EN 60335-2-8:2015 | Identical |
NF EN 60335-2-8 : 2016 AMD 1 2016 | Identical |
DIN EN 60335-2-8 : 2016 | Identical |
EN 60335-2-8:2015/A1:2016 | Identical |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
IEC 60335-2-32:2002+AMD1:2008+AMD2:2013 CSV | Household and similar electrical appliances - Safety - Part 2-32:Particular requirements for massage appliances |
ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.