BS EN 60130-17:1999
Current
The latest, up-to-date edition.
Connectors for frequencies below 3 MHz Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
Hardcopy , PDF
English
15-09-1999
1 General
1.1 Scope
1.2 Normative references
1.3 Ratings and characteristics
1.4 Marking
1.4.1 On each connector
1.4.2 On the package
2 IEC type designation
3 Dimensional information for 7,2 V battery
interconnection system - Type A
3.1 General
3.2 Isometric view and common features
3.3 Mating information
3.3.1 Keyed fixed connector styles
3.3.2 Mating direction - Right-angle fixed
connector, styles A and B
3.3.3 Mating configurations - Right-angle
fixed connector, styles A and B
3.3.4 Mating direction - Vertical fixed
connector assembly, style C
3.3.5 Mating configurations - Vertical fixed
connector assembly, style C
3.4 Fixed connectors
3.4.1 Dimensions
3.4.2 Terminations
3.5 Free connectors
3.5.1 Dimensions
3.5.2 Electrical contact area
3.6 Mounting information for fixed connector with
male contacts
3.6.1 Printed board
3.7 Mounting information for free connector with
female contacts
3.8 Gauges
3.8.1 Sizing and retention force gauge
4 Dimensional information for 10,8 V battery interconnection
system - Type B
4.1 General
4.2 Isometric view and common features
4.3 Mating information
4.3.1 Keyed fixed connector styles
4.3.2 Mating direction
4.3.3 Mating configuration
4.4 Fixed connectors
4.4.1 Dimensions
4.4.2 Terminations
4.5 Free connectors
4.5.1 Dimensions
4.5.2 Electrical contact area
4.6 Mounting information for fixed connector with
male contacts
4.6.1 Printed board
4.7 Mounting information for free connector with
female contacts
4.8 Gauges
4.8.1 Sizing and retention force gauge
5 Dimensional information for 4,8 V battery interconnection
system - Type C
6 Dimensional information for 12,0 V battery interconnection
system - Type D
7 Characteristics
7.1 Climatic category
7.2 Electrical
7.2.1 Voltage proof
7.2.2 Current-carrying capacity
7.2.3 Initial contact resistance
7.3 Mechanical
7.3.1 Mechanical operation
7.3.2 Insertion and withdrawal forces
8 Test schedule
8.1 General
8.2 Arrangement for dynamic stress tests
9 Test schedule tables
9.1 Preliminary test group P
9.2 Group AP
9.3 Group BP
9.4 Group CP
Annex ZA (normative) Normative references to international
publications with their corresponding European publications
A connector detail specification for a battery interconnection system for portable computers, cellular telephones and other electronic devices needing power not exceeding 50 V d.c. SELV (Safety Extra Low Voltage).
Committee |
EPL/48
|
DevelopmentNote |
Also numbered as IEC 60130-17. (09/2005)
|
DocumentType |
Standard
|
Pages |
38
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Standards | Relationship |
SN EN 60130-17 : 1999 | Identical |
NF EN 60130-17 : 1999 | Identical |
NBN EN 60130-17 : 2000 | Identical |
EN 60130-17:1999 | Identical |
DIN EN 60130-17:1999-12 | Identical |
I.S. EN 60130-17:1999 | Identical |
IEC 60512-8:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
IEC 60130-0:1970 | Connectors for frequencies below 3 MHz. Part 0: Guide to drawing information in detail specifications |
IEC 60512-6:1984 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests |
IEC 60512-7:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests |
EN 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
IEC 60512-4:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests |
IEC 60512-5:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
IEC 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
IEC 60512-3:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.