BS EN 54-10:2002
Current
The latest, up-to-date edition.
Fire detection and fire alarm systems Flame detectors. Point detectors
Hardcopy , PDF
English
29-09-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 Compliance
4.2 Classification
4.3 Individual alarm indication
4.4 Connection of ancillary devices
4.5 Monitoring of detachable detectors
4.6 Manufacturer's adjustment
4.7 On-site sensitivity adjustment
4.8 Data
4.9 Additional requirements for software controlled
detectors
4.9.1 General
4.9.2 Software documentation
4.9.3 Software design
4.9.4 The storage of programs and data
5 Tests
5.1 General
5.1.1 Atmospheric conditions for tests
5.1.2 Operating conditions for tests
5.1.3 Mounting arrangements
5.1.4 Tolerances
5.1.5 Determination of response point
5.1.6 Test procedure
5.1.7 Reduced functional tests
5.1.8 Provision for tests
5.1.9 Test schedule
5.2 Reproducibility
5.2.1 Object
5.2.2 Test procedure
5.2.3 Requirements
5.3 Repeatability
5.3.1 Object
5.3.2 Test procedure
5.3.3 Requirements
5.4 Directional dependence
5.4.1 Object
5.4.2 Test procedure
5.4.3 Requirements
5.5 Fire sensitivity
5.5.1 Object
5.5.2 Test procedure
5.5.3 Classification
5.5.4 Requirements
5.6 Dazzling (operational)
5.6.1 Object
5.6.2 Test procedure and apparatus
5.6.3 Requirements
5.7 Dry heat (operational)
5.7.1 Object
5.7.2 Test procedure and apparatus
5.7.3 Requirements
5.8 Cold (operational)
5.8.1 Object
5.8.2 Test procedure and apparatus
5.8.3 Requirements
5.9 Damp heat, cyclic (operational)
5.9.1 Object
5.9.2 Test procedure and apparatus
5.9.3 Requirements
5.10 Damp heat, steady state (endurance)
5.10.1 Object
5.10.2 Test procedure and apparatus
5.10.3 Requirements
5.11 Sulfur dioxide (SO[2]) corrosion (endurance)
5.11.1 Object
5.11.2 Test procedure and apparatus
5.11.3 Requirements
5.12 Shock (operational)
5.12.1 Object
5.12.2 Test procedure and apparatus
5.12.3 Requirements
5.13 Impact (operational)
5.13.1 Object
5.13.2 Test procedure and apparatus
5.13.3 Requirements
5.14 Vibration, sinusoidal, (operational)
5.14.1 Object
5.14.2 Test procedure and apparatus
5.14.3 Requirements
5.15 Vibration, sinusoidal (endurance)
5.15.1 Object
5.15.2 Test procedure and apparatus
5.15.3 Requirements
5.16 Variation in supply parameters (operational)
5.16.1 Object
5.16.2 Test procedure
5.16.3 Requirements
5.17 Electromagnetic Compatibility (EMC), Immunity tests
(operational)
5.17.1 Object
5.17.2 Test procedure and apparatus
5.17.3 Requirements
6 Marking
Annex A (normative) Annex A Apparatus for response point
determination
A.1 Optical bench
A.2 Radiation source
A.3 Shutter
A.4 Modulator
A.5 Radiometer
Annex B (informative) Example of a methane burner
Annex C (normative) Test fires
C.1 Methylated spirit fire
Annex D (normative) Apparatus for dazzling test
Annex E (normative) Apparatus for impact test
Annex ZA (informative) Clauses addressing the provisions of the EU
Construction Products Directive 89/106/EEC
Bibliography
Covers requirements, test methods and performance criteria for point-type, resettable flame detectors that operate using radiation from a flame for use in fire detection systems installed in buildings.
| Committee |
FSH/12
|
| DevelopmentNote |
Supersedes 91/42154 DC. (03/2002) Supersedes 05/30133544 DC. (09/2007)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 54-10:2002 | Identical |
| NBN EN 54-10 : 2002 AMD 1 2006 | Identical |
| SN EN 54-10 : 2002 AMD 1 2006 | Identical |
| DIN EN 54-10:2012-01 (Draft) | Identical |
| UNI EN 54-10 : 2006 | Identical |
| NF EN 54-10 : 2002 AMD 1 2006 | Identical |
| UNE-EN 54-10:2002 | Identical |
| NEN EN 54-10 : 2002 AMD 1 2005 | Identical |
| NS EN 54-10 : 2002 AMD 1 2006 | Identical |
| I.S. EN 54-10:2002 | Identical |
| DIN EN 54-10:2002-05 | Identical |
| BS 5839-1(2002) : 2002 | FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR SYSTEM DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE |
| BS 5839-1:2017 | Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| 12/30260278 DC : 0 | BS 5839-1 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE |
| 12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
| BS 5839-1:2013 | Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises |
| PD 6686:2006 | Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries |
| 01/540647 DC : DRAFT MAY 2001 | BS 5839-1 - FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - PART 1 - CODE OF PRACTICE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE |
| PD 7974-4:2003 | Application of fire safety engineering principles to the design of buildings Detection of fire and activation of fire protection systems. (Sub-system 4) |
| ISO 209-1:1989 | Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| EN 54-1:2011 | Fire detection and fire alarm systems - Part 1: Introduction |
| IEC 60068-2-56:1988 | Environmental testing - Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.