BS EN 50180:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers
Hardcopy , PDF
31-10-2015
English
15-08-1999
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 Open type bushing
3.2 Plug-in type bushing
3.3 Separable connector
3.4 Interface type
3.5 Bail holder
4 Requirements
4.1 Application
4.2 Standard values of rated voltage (Ur)
4.3 Standard values of rated current (Ir)
4.4 Compliance
4.5 Common dimensions
4.6 Detail dimensions and creepage distances of open type bushings
4.6.1 250 A, upright types
4.6.2 250 A, inclined types
4.6.3 630 A, upright types
4.6.4 630 A, inclined types
4.6.5 1,250 A types
4.6.6 2,000-3,150 A types
4.7 Detail dimensions of plug-in type bushings
4.7.1 Outside cone types
4.7.2 Inside cone types
Annex A (normative) Detail drawings of porcelain
A.1 250 A upright insulators
A.2 250 A inclined insulators
A.3 630 A upright insulators
A.4 630 A inclined insulators
A.5 1,250 A insulators
A.6 2,000-3,150 A insulators
Applies to ceramic and resin insulated bushings for rated voltages in excess of 1 kV up to 36 kV and rated currents from 250 A to 3 150 A for insulating liquid filled transformers. Determines essential dimensions for ensuring interchangeability of bushings and mating plug-in separable connectors of equivalent ratings.
Committee |
PEL/36
|
DevelopmentNote |
Supersedes BS 7616(1993) (07/1999) Supersedes 94/202406 DC . (09/2005) Supersedes 09/30214442 DC. (11/2010)
|
DocumentType |
Standard
|
Pages |
38
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN 50180 : 2010 | Identical |
EN 50180:2010 | Identical |
I.S. EN 50180:2010 | Identical |
NF EN 50180 : 2011 | Identical |
SN EN 50180 : 1997 | Identical |
DIN EN 50180:2011-04 | Identical |
NBN EN 50180 : 2010 | Identical |
UNE-EN 50180:1997 | Identical |
IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
IEC 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
IEC 60672-3:1997 | Ceramic and glass-insulating materials - Part 3: Specifications for individual materials |
EN 60672-3:1997 | Ceramic and glass-insulating materials - Part 3: Specifications for individual materials |
IEC 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.