BS EN 4700-002:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
Available format(s)
Hardcopy , PDF
Superseded date
19-05-2021
Superseded by
Language(s)
English
Published date
30-06-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
Specifies the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy bar and section.
| Committee |
ACE/61/-/15
|
| DevelopmentNote |
Supersedes 01/710900 DC. (10/2010) Supersedes 13/30290101 DC. (06/2016)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy bar and section. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
| Standards | Relationship |
| EN 4700-002:2016 | Identical |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| PREN 2002-16 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 16: NON-DESTRUCTIVE TESTING - PENETRANT TESTING |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| EN 10079:2007 | Definition of steel products |
| EN 2950:2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| EN 2032-2:1994 | Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 4050-4:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria |
| EN 4050-1:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements |
| EN 3987:2009 | Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing |
| SAE AMS 2750 : 2012 | PYROMETRY |
| EN 2032-001:2014 | Aerospace series - Metallic materials - Part 001: Conventional designation |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| PREN 3874 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| EN ISO 3651-1 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST) |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| ISO 15549:2008 | Non-destructive testing Eddy current testing General principles |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 2002-002:2005 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| EN ISO 15549:2010 | Non-destructive testing - Eddy current testing - General principles (ISO 15549:2008) |
| SAE AMS 2315 : 2013 | DETERMINATION OF DELTA FERRITE CONTENT |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 2002-005:2007 | Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 2002-001:2005 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
| PREN 3988 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING |
| PREN 2951 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.