BS EN 2399:2008
Current
Current
The latest, up-to-date edition.
Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-01-2011
Publisher
Foreword
Introduction
1 Scope
2 Normative references
Describes the requirements relating to: Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - R[m] >= 900 MPA - Bars for forged bolts - D <= 25 mm, for aerospace applications.
| Committee |
ACE/61/-/15
|
| DevelopmentNote |
Together with BS 2HR650(2011) & BS EN 2398, it supersedes BS HR650(1972). (01/2011)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 2399:2008 | Identical |
| 12/30262055 DC : 0 | BS 4A 104+A2 - SPECIFICATION FOR CORROSION-RESISTING STEEL BOLTS (UNIFIED HEXAGONS AND UNIFIED THREADS) FOR AIRCRAFT |
| BS 6SP 4(2000) : 2000 | AEROSPACE SERIES - PINS HEADED, PLAIN SHANK, DRILLED, STEEL ALLOY AND CORROSION RESISTING STEEL WITH A STRENGTH CLASS 880 MPA |
| 12/30261969 DC : DRAFT JUNE 2012 | BS 2A 174 - 100 DEGREES COUNTERSUNK HEAD CORROSION-RESISTING STEEL BOLTS (UNIFIED THREADS), STRENGTH CLASS 880 MPA, FOR AIRCRAFT |
| 12/30262058 DC : 0 | BS 4A114 - SPECIFICATION FOR CORROSION-RESISTING STEEL, MUSHROOM-HEADED, SLOTTED-DRIVE, BOLTS (STRENGTH A CLASS 880/1080) |
| BS 2HR 650:2011 | Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm) |
| BS 4A114(1999) : 1999 | SPECIFICATION FOR CORROSION-RESISTING STEEL, MUSHROOM-HEADED, SLOTTED-DRIVE, BOLTS, STRENGTH CLASS 880 MPA |
| BS 4A104(2002) : 2002 | AEROSPACE SERIES - SPECIFICATION FOR CORROSION-RESISTING STEEL BOLTS (UNIFIED HEXAGONS AND UNIFIED THREADS), STRENGTH CLASS 880 MPA, FOR AIRCRAFT |
| BS 3A117(1962) : 1962 | AEROSPACE SERIES - BOLTS, PAN HEAD, SLOTTED DRIVE, UNIFIED THREADS, CORROSION RESISTING STEEL, STRENGTH CLASS 880 MPA, FOR AIRCRAFT - SPECIFICATION |
| 15/30266106 DC : 0 | BS 3A 117:1962+A2 - SPECIFICATION FOR CORROSION-RESISTING STEEL PAN HEAD BOLTS (UNIFIEDTHREADS) FOR AIRCRAFT |
| BS 3A 174:2012 | 100° Countersunk head, D-slot recess, corrosion-resisting steel bolts (Unified threads), Strength Class 880 MPa, for aircraft |
| BS A 401-420:2015 | Specification for screws, pan and 100° countersunk head, hexalobular drive recess (unified threads below ¼ inch) in various materials |
| 11/30251779 DC : 0 | BS 6SP 4:2000+A3 - PINS HEADED, PLAIN SHANK, DRILLED, STEEL ALLOY AND CORROSION RESISTING STEEL WITH A STRENGTH CLASS 880/1080 MPA |
| 10/30238238 DC : 0 | BS 2HR 650 - SPECIFICATION FOR HIGH EXPANSION HEAT-RESISTING STEEL BAR AND WIRE FOR THE MANUFACTURE OF BOLTS, STUDS, SET SCREWS AND NUTS (NI 25.5, CR 15, TI2, MN 1.5, MO 1.25, SI 0.7, V 0.3) (LIMITING RULING SECTION 50 MM) |
| PREN 2002-16 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 16: NON-DESTRUCTIVE TESTING - PENETRANT TESTING |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| EN 2344:2001 | Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm < = D < = 180 mm - Dimensions |
| EN 2398:2008 | Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm |
| PREN 4500-003 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING SLLOYS |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| PREN 4050-4 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - ACCEPTANCE CRITERIA |
| PREN 2951 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.