BS EN 1858 : 2008
Current
The latest, up-to-date edition.
CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
Hardcopy , PDF
English
01-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Reinforcement for handling
6 Surface treatment
7 Form, dimensions and tolerances
8 Performance
9 Designation
10 Marking
11 Product information
12 Evaluation of conformity
Annex A (normative) - Test methods
Annex B (informative) - Examples of concrete flue block
shapes
Annex C (normative) - Thermal resistance calculation method
Annex D (normative) - Requirements of sampling plan
according to ISO 2859-1:1999 at an Acceptable
Quality Level (AQL) of 10% and inspection level
S2
Annex E (informative) - Recommended test sequence
Annex ZA (informative) - Clauses of this European standard
addressing the provisions of the EU Construction
Products Directive
Bibliography
National Annex NA (informative) - Recommendations for
design and construction of Type B
concrete flue block systems for
gas appliances
Describes the materials, dimensional and performance requirements for precast concrete flue blocks as defined for use in chimneys.
| Committee |
B/506/4
|
| DevelopmentNote |
Supersedes 02/103301 DC (03/2005) Supersedes BS 1289-1(1986) (09/2005) 2008 Edition Re-Issued in September 2011 & incorporates AMD 1 2011. Supersedes 07/30156246 DC and 11/30227417 DC. (09/2011)
|
| DocumentType |
Standard
|
| Pages |
68
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 1858:2011 | Identical |
| UNI EN 1858 : 2012 | Identical |
| NS EN 1858 : 2008 + A1 2011 | Identical |
| I.S. EN 1858:2008 | Identical |
| NF EN 1858 : 2009 + A1 2011 | Identical |
| EN 1858:2008+A1:2011 | Identical |
| NEN EN 1858 : 2009 + A1 2011 | Identical |
| DIN EN 1858:2016-08 (Draft) | Identical |
| SN EN 1858 : 2008 + A1 2011 | Identical |
| NBN EN 1858 : 2009 + A1 2011 | Identical |
| DIN EN 1858:2011-09 | Identical |
| 07/30150793 DC : 0 | BS 5440-1 - FUELING AND VENTILATION FOR GAS APPLIANCES OF RATED INPUT NOT EXCEEDING 70 KW NET (1ST, 2ND AND 3RD FAMILY GASES) - PART 1: SPECIFICATION FOR INSTALLATION OF GAS APPLIANCES TO CHIMNEYS AND FOR MAINTENANCE OF CHIMNEYS |
| 08/30166387 DC : DRAFT MAY 2008 | BS 7977-1 - SPECIFICATION FOR SAFETY AND RATIONAL USE OF ENERGY OF DOMESTIC GAS APPLIANCES - PART 1: RADIANT/CONVECTORS |
| BS 5410-1:2014 | Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes |
| BS 7977-1(2009) : 2009 | SPECIFICATION FOR SAFETY AND RATIONAL USE OF ENERGY OF DOMESTIC GAS APPLIANCES - PART 1: RADIANT/CONVECTORS |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| BS 5440-1:2008 | Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) Specification for installation of gas appliances to chimneys and for maintenance of chimneys |
| 14/30285453 DC : 0 | BS 5410-1 - CODE OF PRACTICE FOR OIL FIRING - PART 1: INSTALLATIONS UP TO 45 KW OUTPUT CAPACITY FOR SPACE HEATING AND HOT WATER SUPPLY PURPOSES |
| BS 5410-1:1997 | Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| ISO/IEC 17021:2011 | Conformity assessment Requirements for bodies providing audit and certification of management systems |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 13216-1:2004 | Chimneys - Test methods for system chimneys - Part 1: General test methods |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 13384-1:2015 | Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 15287-1:2007+A1:2010 | Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1443:2003 | Chimneys - General requirements |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| EN ISO/IEC 17021:2011 | Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
| EN 14297:2004 | Chimneys - Freeze-thaw resistance test method for chimney products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.