BS EN 1762:2017
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
Hardcopy , PDF
23-01-2019
English
31-03-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials and construction
6 Dimensions
7 Physical properties
8 Electrical properties
9 Type testing
10 Frequency of testing
11 Marking
Annex A (normative) - Flammability test
Annex B (normative) - Test frequency
Annex C (informative) - Test frequency
Defines the requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in liquid or gaseous phase and natural gas with a maximum working pressure of 25 bar (2,5 MPa) and vacuum within the temperature range of -30 degrees C to +70 degrees C and, when designated -LT, -50 degrees C to +70 degrees C.
| Committee |
PRI/66
|
| DevelopmentNote |
Partially supersedes BS 4089(1989) Supersedes 01/122580 DC. (06/2004)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in liquid or gaseous phase and natural gas with a maximum working pressure of 25bar (2,5MPa) and vacuum within the temperature range of −30°C to +70°C and, when designated -LT, −50°C to +70°C.
| Standards | Relationship |
| I.S. EN 1762:2017 | Identical |
| NBN EN 1762 : 2003 COR 2007 | Identical |
| NS EN 1762 : 2017 | Identical |
| SN EN 1762 : 2017 | Identical |
| UNE-EN 1762:2017 | Identical |
| ONORM EN 1762 : 2017 | Identical |
| NEN EN 1762 : 2017 | Identical |
| EN 1762:2017 | Identical |
| UNI EN 1762 : 2006 | Identical |
| NF EN 1762 : 2017 | Identical |
| DIN EN 1762:2016-09 (Draft) | Identical |
| DIN EN 1762:2004-07 | Identical |
| 12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| PD 6686:2006 | Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN ISO 7233:2016 | Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
| EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
| ISO 7233:2016 | Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum |
| EN ISO 7326:2016 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
| ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
| EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 10619-1:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature |
| ISO 10619-2:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 4671:2007 | Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.