BS EN 1706:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
Hardcopy , PDF
31-08-2021
English
31-03-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Designation systems
6 Chemical composition
7 Mechanical properties
8 Rounding rules for determination of compliance
Annex A (informative) - Mechanical properties of pressure die
cast alloys
Annex B (informative) - Comparison of casting characteristics,
mechanical and other properties
Annex C (informative) - Comparison between cast aluminium
alloy designations
Bibliography
Defines the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.
| Committee |
NFE/35
|
| DevelopmentNote |
Together with BS EN 1676, BS EN 1559-1 & BS EN 1559-4 it supersedes BS 1490(1988) (08/1999) Supersedes 94/713477 DC. (04/2003)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.
Annex B is included as a guide to the selection of alloys for a specific use or process.
This European Standard is intended to be used in conjunction with EN 576, EN 1559-1, EN 1559-4, EN 1676 and EN ISO 8062-3.
| Standards | Relationship |
| DIN EN 1706:2013-12 | Identical |
| UNE-EN 1706:2011 | Identical |
| UNI EN 1706 : 2010 | Identical |
| NEN EN 1706 : 2010 | Identical |
| EN 1706:2010 | Identical |
| NS EN 1706 : 2010 | Identical |
| NBN EN 1706 : 2010 | Identical |
| NF EN 1706 : 2010 | Identical |
| I.S. EN 1706:2010 | Identical |
| SN EN 1706 : 2010 | Identical |
| ONORM EN 1706 : 2013 | Identical |
| BS 1139-2.2(2009) : 2009 | METAL SCAFFOLDING - PART 2: COUPLERS AND FITTINGS - SECTION 2.2: COUPLERS AND FITTINGS OUTSIDE THE SCOPE OF BS EN 74 - REQUIREMENTS AND TEST METHODS |
| DEFSTAN 22-65/2(2001) : INTERIM | SPECIFICATION FOR GAUGES, SUBMARINE DEPTH, DIAL INDICATING |
| DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
| DEFSTAN 22-94/1(2007) : 2007 | SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| DEFSTAN 02-329/2(2005) : 2005 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-868/2(2011) : 2011 | REQUIREMENTS FOR THE DESIGN OF CENTRE FED HOSE REELS |
| DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 22-65/3(2005) : 2005 | GAUGES, SUBMARINE DEPTH, DIAL INDICATING |
| DEFSTAN 02-375/2(2017) : 2017 | VALVE DESIGN AND MANUFACTURE |
| DEFSTAN 22-94/3(2011) : 2011 | SPECIFICATION FOR THE REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| DEFSTAN 22-94/2(2008) : 2008 | SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES |
| 09/30196573 DC : 0 | BS 8530 - TRADITIONAL-STYLE HALF ROUND, BEADED HALF ROUND, VICTORIAN OGEE AND MOULDED OGEE ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| 04/30085945 DC : DRAFT NOV 2004 | BS 1703 - REFUSE CHUTES AND HOPPERS - SPECIFICATION |
| 08/30176707 DC : DRAFT APR 2008 | BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS 5834-2:2011 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for surface boxes |
| BS 1703:2005 | Refuse chutes and hoppers. Specification |
| 09/30150058 DC : 0 | BS 1139-2.2 - METAL SCAFFOLDING - PART 2: COUPLERS - SECTION 2.2: ALUMINIUM COUPLERS AND SPECIAL COUPLERS IN STEEL - REQUIREMENTS AND TEST METHODS |
| BS 8530:2010 | Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification |
| DEFSTAN 02-361/2(2017) : 2017 | VALVE ROD GEARING |
| BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
| EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 1780-3:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| EN 1780-2:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| EN 601:2004 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 576:2003 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.