BS EN 15714-2:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements
Hardcopy , PDF
19-05-2021
English
30-11-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Classification/Designation
4 Design requirements
5 Optional equipment
6 Conformity assessment
7 Marking
8 Documentation
Annex A (normative) - Endurance test procedure
Annex B (informative) - Actuator selection guidelines
Bibliography
Gives basic requirements for electric valve actuators, used for on-off and control valves.
| Committee |
PSE/18/5
|
| DevelopmentNote |
Supersedes 07/30166909 DC. (12/2009)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This document provides basic requirements for electric valve actuators, used for on-off and control valves. It includes guidelines for classification, design, enclosure and corrosion protection, and methods for conformity assessment. Combinations of electric multi-turn actuators and gearboxes supplied by the actuator manufacturer are within the scope of this document. In all other cases this European Standard applies to the electric actuator only. It does not cover: solenoid actuators, electro-hydraulic actuators and electric actuators which are integral in the design of valves. Other requirements or conditions of use different from those indicated in this document shall be agreed between the purchaser and the manufacturer/supplier, prior to order. The terms and definitions applicable to this European Standard are given in FprEN 15714-1.
| Standards | Relationship |
| EN 15714-2:2009 | Identical |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 50160 : 2010 AMD 1 2015 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| EN 15714-1:2009 | Industrial valves - Actuators - Part 1: Terminology and definitions |
| IEC 61158-4:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification |
| IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
| 2006/95/EC : 2006 | DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE) |
| IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 61158-6:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| EN ISO 5210:2017 | Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017) |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 61158-4:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 50262 : 1998 AMD 2 2004 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| EN 61158-5:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| IEC 61158-6:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 61158-5:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition |
| EN 61158-3:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition |
| EN ISO 5211:2017 | Industrial valves - Part-turn actuator attachments (ISO 5211:2017) |
| EN 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| IEC 61158-3:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition |
| ISO 5211:2017 | Industrial valves — Part-turn actuator attachments |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.