BS EN 14399-1:2015
Current
The latest, up-to-date edition.
High-strength structural bolting assemblies for preloading General requirements
Hardcopy , PDF
English
28-02-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Product characteristics
5 Testing and assessment methods
6 Assessment and Verification of Constancy of
Performance (AVCP)
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the
EU Construction Products Regulation
Bibliography
Defines the general requirements for bolt/nut/washer(s) assemblies for high-strength structural bolting, which are suitable for preloading.
| Committee |
FME/9/-/2
|
| DevelopmentNote |
Supersedes 02/704460 DC. (11/2005) Together with BS EN 14399-2, BS EN 14399-3, BS EN 14399-4, BS EN 14399-5, BS EN 14399-6, BS EN 14399-7, BS EN 14399-8 and BS EN 14399-10 it supersedes BS 4395-1(1969) and BS 4395-2(1969). (07/2009)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the general requirements for bolt/nut/washer(s) assemblies for high-strength structural bolting, which are suitable for preloading. The intended use of bolting assemblies in accordance with this European Standard is structural metallic works. NOTE1 High-strength structural bolting assemblies in accordance with EN14399‑2 to EN14399‑10 are designed to fulfil the requirements of this European Standard. NOTE2 High-strength structural bolting assemblies are suitable for preloading in accordance with EN1090‑2 in steel structures. High-strength structural bolting assemblies smaller than M12 are not designed to be preloaded. High-strength structural bolting assemblies are not designed to be welded. Railway rail fasteners are not covered by this standard.
| Standards | Relationship |
| UNI EN 14399-1 : 2005 | Identical |
| NF EN 14399-1 : 2015 | Identical |
| NEN EN 14399-1 : 2015 | Identical |
| EN 14399-1:2015 | Identical |
| DIN EN 14399-1:2015-04 | Identical |
| NS EN 14399-1 : 2015 | Identical |
| SN EN 14399-1 : 2015 | Identical |
| I.S. EN 14399-1:2015 | Identical |
| NBN EN 14399-1 : 2015 | Identical |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| 12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 14399-8:2007 | High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 14399-3:2015 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| ISO 4759-3:2016 | Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 965-5:1998 | ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN ISO 4759-3:2016 | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| EN ISO 4759-1:2000 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 14399-6:2015 | High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers |
| ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 225:2010 | Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 14399-4:2015 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| EN 14399-7:2007 | High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
| EN 14399-5:2015 | High-strength structural bolting assemblies for preloading - Part 5: Plain washers |
| EN 14399-2:2015 | High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.