BS EN 1426:2015
Current
The latest, up-to-date edition.
Bitumen and bituminous binders. Determination of needle penetration
Hardcopy , PDF
English
31-07-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Sampling
7 Procedure
8 Expression of results
9 Precision
10 Test report
Annex A (informative) - Characteristics of thermometers
Bibliography
Gives a method for determining the consistency of bitumen and bituminous binders.
| Committee |
PTI/13
|
| DevelopmentNote |
Supersedes 94/504432 DC. (10/2001) Supersedes 05/30138267 DC. (05/2007) Also numbered as BS 2000-49(2015). Supersedes BS 2000-49(2007) & 13/30255310 DC. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies a method for determining the consistency of bitumen and bituminous binders. Normal procedure is described for penetrations up to (330×0,1)mm, but for penetrations above this value, up to (500×0,1)mm, different operating parameters are necessary. WARNING— Use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Standards | Relationship |
| NBN EN 1426 : 2015 | Identical |
| NEN EN 1426 : 2015 | Identical |
| SN EN 1426:2016 | Identical |
| DIN EN 1426:2015-09 | Identical |
| UNE-EN 1426:2015 | Identical |
| EN 1426:2015 | Identical |
| I.S. EN 1426:2015 | Identical |
| IP 49 : 2007 | Identical |
| NS EN 1426 : 1999 | Identical |
| UNI EN 1426 : 2007 | Identical |
| 10/30213884 DC : 0 | BS 594987 - ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING AND COMPACTION AND TYPE TESTING PROTOCOLS |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| 14/30283621 DC : 0 | PD 6691:2015 - GUIDANCE ON THE USE OF BS EN 13108 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 594987(2015) : 2015 | ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING, COMPACTION AND PRODUCT-TYPE TESTING PROTOCOLS |
| BS 594987:2010 | Asphalt for roads and other paved areas. Specification for transport, laying, compaction and type testing protocols |
| BS 8217:2005 | Reinforced bitumen membranes for roofing. Code of practice |
| BS 4841-3:2006 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes |
| BS 4841-4:2006 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes |
| 14/30283618 DC : 0 | BS 594987:2015 - ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING, COMPACTION AND PRODUCT TYPE TESTING PROTOCOLS |
| BS 598-107:2004 | Sampling and examination of bituminous mixtures for roads and other paved areas Method of test for the determination of the composition of design surface course rolled asphalt |
| BS 4164:2002 | Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer |
| BS 1377-1:2016 | Methods of test for soils for civil engineering purposes General requirements and sample preparation |
| BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| PD 6691:2010 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| BS PD6691(2015) : 2015 | GUIDANCE ON THE USE OF BS EN 13108, BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| PD 6691:2007 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| BS 594987:2007 | Asphalt for roads and other paved areas - Specification for transport, laying and compaction and type testing protocols. |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| EN ISO 1302:2002 | Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 12597:2014 | Bitumen and bituminous binders - Terminology |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| EN 12594:2014 | Bitumen and bituminous binders - Preparation of test samples |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.