BS EN 13914-2:2016
Current
The latest, up-to-date edition.
Design, preparation and application of external rendering and internal plastering Internal plastering
Hardcopy , PDF
English
31-03-2017
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and accessories
5 Essential principles and building programme
6 Design
7 Preparation and application of plasters
8 Maintenance and repair (other than restoration)
Annex A (normative) - Design considerations for work and
acceptance of smooth plaster finishes under aspects
of lighting
Annex B (informative) - Methods of minimizing the occurrence
of cracks
Annex C (informative) - Fixing applied backgrounds
Annex D (informative) - Restoration of plasters
Bibliography
National Annex NA (informative) - Internal plastering: guidance
on the use of BS EN 13914-2
Defines the design considerations and essential principles for internal plastering systems and application of plastering systems.
Committee |
B/519
|
DevelopmentNote |
Supersedes 02/103010 DC. (06/2005) Together with BS 8481(2006) and BS PD CEN/TR 15123 supersedes BS 5492(1990). (10/2006) Supersedes 13/30265753 DC. (07/2016)
|
DocumentType |
Standard
|
Pages |
42
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard deals with the design considerations and essential principles for internal plastering systems and application of plastering systems. The different parts of the EN13914 series of standards specify requirements and recommendations for detailing, design and material considerations, the selection of mixes and the application of gypsum plasters, gypsum/lime plasters, lightweight plasters, lime/gypsum-, cement- and cement/lime-based plasters, lime-based plasters, clay plasters, silicate plasters, organic plasters, polymer-modified plasters, etc. This standard does not deal with the following: external finishes; painting and/or preparation; impregnations; structural repair of concrete; prefabricated fibre-reinforced plaster elements. Owing to the many and varied materials and practices and different climatic conditions in Europe it is not possible for certain aspects of the standard to enter into sufficient detail to be fully usable to practitioners in each country. Such guidance to complement, but not alter, any basic European recommendations is given in documentation prepared by each country. Aspects of this European Standard, the basic recommendations of which may need to be complemented, are indicated where they occur by a footnote referencing this clause.
Standards | Relationship |
I.S. EN 13914-2:2016 | Identical |
NF EN 13914-2 : 2016 | Identical |
DIN EN 13914-2:2016-09 | Identical |
UNE-EN 13914-2:2006 | Identical |
SN EN 13914-2 : 2016 | Identical |
NBN EN 13914-2 : 2016 | Identical |
NEN EN 13914-2 : 2016 | Identical |
NS EN 13914-2 : 2005 | Identical |
UNI EN 13914-2 : 2005 | Identical |
EN 13914-2:2016 | Identical |
12/30258583 DC : 0 | BS 6576 AMD 1 - CODE OF PRACTICE FOR DIAGNOSIS OF RISING DAMP IN WALLS OF BUILDINGS AND INSTALLATION OF CHEMICAL DAMP-PROOF COURSES |
06/30140171 DC : DRAFT APR 2006 | BS 8481 - DESIGN, PREPARATION AND APPLICATION OF INTERNAL GYPSUM, CEMENT, CEMENT AND LIME PLASTERING SYSTEMS - SPECIFICATION |
BS 6576(2005) : 2005 | CODE OF PRACTICE FOR DIAGNOSIS OF RISING DAMP IN WALLS OF BUILDINGS AND INSTALLATION OF CHEMICAL DAMP-PROOF COURSES |
BS 5385-1:2009 | Wall and floor tiling Design and installation of ceramic, natural stone and mosaic wall tiling in normal internal conditions. Code of practice |
BS 6100-9:2007 | Building and civil engineering. Vocabulary Work with concrete and plaster |
BS 8481:2006 | Design, preparation and application of internal gypsum, cement, cement and lime plastering systems. Specification |
BS 6100-0:2010 | Building and civil engineering. Vocabulary Introduction and index |
14/30277805 DC : 0 | BS 6150:2006+A1:2014 - PAINTING OF BUILDINGS - CODE OF PRACTICE |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
08/30043515 DC : DRAFT FEB 2008 | BS 5385-1 - WALL AND FLOOR TILING - PART 1: DESIGN AND INSTALLATION OF CERAMIC AND NATURAL STONE AND MOSAIC WALL TILING IN NORMAL INTERNAL CONDITIONS - CODE OF PRACTICE |
EN 413-1:2011 | Masonry cement - Part 1: Composition, specifications and conformity criteria |
EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
BS EN 413-1:2011 | Masonry cement Composition, specifications and conformity criteria |
BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
EN 13914-1:2016 | Design, preparation and application of external rendering and internal plastering - Part 1: External rendering |
EN 13658-1:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
ISO 16120-2:2017 | Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general purpose wire rod |
EN 16566:2014 | Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
EN 10244-2:2009 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
EN 459-1:2015 | Building lime - Part 1: Definitions, specifications and conformity criteria |
EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
EN 413-1:2011 | Masonry cement - Part 1: Composition, specifications and conformity criteria |
EN ISO 16120-2:2017 | Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod (ISO 16120-2:2017) |
EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
EN 13279-1:2008 | Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
EN 13496:2013 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS) |
EN 934-3:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling |
EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
EN 998-1:2016 | Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.