BS EN 1339:2003

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for materials
  4.1 General
  4.2 Asbestos
5 Requirements for products
  5.1 General
  5.2 Shape and dimensions
      5.2.1 General
      5.2.2 Work dimensions
      5.2.3 Spacer nibs, draw or chased profiled side
            faces
      5.2.4 Permissible deviations
  5.3 Physical and mechanical properties
      5.3.1 General
      5.3.2 Weathering resistance
      5.3.3 Bending strength.
      5.3.4 Abrasion resistance
      5.3.5 Slip/skid resistance
      5.3.6 Breaking load
      5.3.7 Fire performance
      5.3.8 Thermal conductivity
  5.4 Visual aspects
      5.4.1 Appearance
      5.4.2 Texture
      5.4.3 Colour
6 Evaluation of conformity
  6.1 General
      6.1.1 Demonstration of conformity
      6.1.2 Assessment of conformity
  6.2 Type testing of the product
      6.2.1 Initial type testing
      6.2.2 Further type test
      6.2.3 Sampling, testing and conformity criteria
  6.3 Factory production control
      6.3.1 General
      6.3.2 Equipment
      6.3.3 Raw and other incoming materials
      6.3.4 Production process
      6.3.5 Product testing
      6.3.6 Marking, storage and delivery of products
      6.3.7 Non-conforming products
      6.3.8 Product conformity criteria
7 Marking
8 Test report
Annex A (informative) Inspection schemes
      A.1 Equipment inspection
      A.2 Materials inspection
      A.3 Production process inspection
      A.4 Product inspection
      A.5 Switching rules
Annex B (normative) Procedure for acceptance testing
        of a consignment at delivery
      B.1 General
      B.2 Sampling procedure
      B.3 Conformity criteria
Annex C (normative) Measurement of the dimensions
        of a single flag
      C.1 Preparation
      C.2 Plan dimensions
      C.3 Thickness
      C.4 Flatness and bow
      C.5 Chamfer
      C.6 Thickness of facing layer
      C.7 Examples of measuring equipment
      C.8 Test report
Annex D (normative) Determination of freeze/thaw
        resistance with de-icing salt
      D.1 Principle
      D.2 Specimen
      D.3 Materials
      D.4 Apparatus
      D.5 Preparation of test specimens
      D.6 Procedure
      D.7 Calculation of test results
      D.8 Test report
Annex E (normative) Determination of total water
        absorption
      E.1 Principle
      E.2 Specimen
      E.3 Materials
      E.4 Apparatus
      E.5 Preparation of the test specimens
      E.6 Procedure
      E.7 Calculation of test results
      E.8 Test report
Annex F (normative) Measurement of bending strength
        and breaking load
      F.1 Apparatus
      F.2 Preparation
      F.3 Procedure
      F.4 Calculation of test results
      F.5 Test report
Annex G (normative) Measurement of abrasion resistance
      G.1 Principle of wide wheel abrasion test
      G.2 Abrasive material
      G.3 Apparatus
      G.4 Calibration
      G.5 Preparation of the specimen
      G.6 Procedure
      G.7 Measuring the groove
      G.8 Calculation of test results
      G.9 Test report
Annex H (normative) Measuring of abrasion according to
        the Böhme test
      H.1 Principle
      H.2 Abrasive material
      H.3 Apparatus
      H.4 Preparation of specimens
      H.5 Procedure
      H.6 Calculation of test results
      H.7 Test report
Annex I (normative) Method for the determination of
        unpolished slip resistance value (USRV)
      I.1 Principle
      I.2 Apparatus
      I.3 Calibration
      I.4 Sampling
      I.5 Procedure
      I.6 Calculation of test results
      I.7 Test report
Annex J (normative) Verification of visual aspects
      J.1 Preparation
      J.2 Procedure
Annex K (informative) Example of the application of
        the method for the evaluation of conformity
        of either bending strength or breaking load
        by variables (6.3.8.3.B)
      K.1 General
      K.2 Basic formula
      K.3 Acceptance factors
      K.4 Standard deviations s
      K.5 Application of switching rules
      K.6 Results
Annex ZA (informative) Clauses of this European
         Standard addressing the provisions of the
         EU Construction Products Directive (89/106/EEC)
      ZA.1 Scope and relevant characteristic
      ZA.2 Procedures for the attestation of conformity
           ZA.2.1 System of attestation of conformity
           ZA.2.2 Declaration of conformity
      ZA.3 Assignation of tasks

Describes materials, properties, requirements and test methods for cement bound unreinforced concrete paving flags and complementary fittings.