BS EN 13353 : 2008
Current
Current
The latest, up-to-date edition.
SOLID WOOD PANELS (SWP) - REQUIREMENTS
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2008
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms, definitions and classes
4 Requirements
5 Supplementary properties
6 Verification of compliance
7 Marking
Annex A (normative) - Properties for structural and
non-structural applications
Bibliography
Describes requirements for solid wood panels as defined in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of EN 1995-1-1.
| Committee |
B/541
|
| DevelopmentNote |
Supersedes 07/30160760 DC. (10/2009) 2008 Edition Re-Issued in July 2011 & incorporates AMD 1 2011. (07/2011)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ONORM EN 13353 : 2011 | Identical |
| UNE-EN 13353:2009 | Identical |
| NF EN 13353 : 2009 + A1 2011 | Identical |
| NBN EN 13353 : 2009 + A1 2011 | Identical |
| EN 13353:2008+A1:2011 | Identical |
| DIN EN 13353:2011-07 | Identical |
| SN EN 13353 : 2008 + A1 2011 | Identical |
| NEN EN 13353 : 2008 + A1 2011 | Identical |
| UNI EN 13353 : 2011 | Identical |
| I.S. EN 13353:2008 | Identical |
| NS EN 13353 : 2008 + A1 2011 | Identical |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 635-2:1995 | Plywood - Classification by surface appearance - Part 2: Hardwood |
| EN 13017-1:2000 | Solid wood panels - Classification by surface appearance - Part 1: Softwood |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 12369-3:2008 | Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels |
| EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
| EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| EN 635-1:1994 | Plywood - Classification by surface appearance - Part 1: General |
| EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 13017-2:2000 | Solid wood panels - Classification by surface appearance - Part 2: Hardwood |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 315:2000 | Plywood - Tolerances for dimensions |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 13354:2008 | Solid wood panels (SWP) - Bonding quality - Test method |
| EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| EN 635-3:1995 | Plywood - Classification by surface appearance - Part 3: Softwood |
| CEN/TS 635-4:2007 | Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline |
| DIN 53255:1964-06 | TESTING OF WOOD ADHESIVES AND GLUED WOOD JOINTS - MECHANICAL DELAMINATION TESTS BY GROOVING AND CHOPPING |
| EN 12775:2001 | Solid wood panels - Classification and terminology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.