BS EN 13108-4:2016
Current
The latest, up-to-date edition.
Bituminous mixtures. Material specifications Hot Rolled Asphalt
Hardcopy , PDF
English
28-02-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions symbols and abbreviations
4 Requirements for constituent materials
5 Requirements for the mixture
6 Assessment and verification of constancy of
performance - AVCP
7 Identification
Annex A (normative) - Calculations of the penetration or
the softening point of the binder of a mixture when
reclaimed asphalt is used
Annex B (normative) - Natural asphalt
Annex C (normative) - Coated chippings for application to
Hot Rolled Asphalt surface course
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No. 305/2011
Describes requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas.
| Committee |
B/510/1
|
| DevelopmentNote |
Supersedes BS 594-1(2005). (10/2009) Supersedes 13/30278711 DC. (07/2016)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas. Hot Rolled Asphalt is used for surface courses, binder courses, regulating courses and bases.
The mixtures of the mix group Hot Rolled Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard.
This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN13108‑20 and EN13108‑21.
| Standards | Relationship |
| NBN EN 13108-4 : 2016 | Identical |
| DIN EN 13108-4:2013-06 (Draft) | Identical |
| I.S. EN 13108-4:2016 | Identical |
| UNI EN 13108-4 : 2006 | Identical |
| UNE-EN 13108-4:2007 | Identical |
| NF EN 13108-4 : 2006 | Identical |
| NEN EN 13108-4 : 2016 C1 2017 | Identical |
| ONORM EN 13108-4 : 2016 | Identical |
| EN 13108-4:2016 | Equivalent |
| EN 13108-4:2016/AC:2017 | Identical |
| NS EN 13108-4 : 2016 AC 2017 | Identical |
| 10/30213884 DC : 0 | BS 594987 - ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING AND COMPACTION AND TYPE TESTING PROTOCOLS |
| BS 594987:2007 | Asphalt for roads and other paved areas - Specification for transport, laying and compaction and type testing protocols. |
| PD 6692:2018 | Asphalt. Guidance on the use of BS EN 12697 “Bituminous mixtures. Test methods” |
| 14/30283621 DC : 0 | PD 6691:2015 - GUIDANCE ON THE USE OF BS EN 13108 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| BS 594987:2010 | Asphalt for roads and other paved areas. Specification for transport, laying, compaction and type testing protocols |
| 14/30283618 DC : 0 | BS 594987:2015 - ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING, COMPACTION AND PRODUCT TYPE TESTING PROTOCOLS |
| 07/30154860 DC : DRAFT JAN 2007 | BS 4987-2 - ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING AND COMPACTION AND DESIGN PROTOCOLS |
| PD 6692:2006 | Asphalt. Guidance on the use of BS EN 12697 \'Bituminous mixtures. Test methods for hot mix asphalt\' |
| PD 6691:2007 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| PD 6691:2010 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| BS PD6691(2015) : 2015 | GUIDANCE ON THE USE OF BS EN 13108, BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| 17/30360424 DC : 0 | BS PD 6692 - ASPHALT - GUIDANCE ON THE USE OF BS EN 12697 'BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT' |
| EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
| EN 12697-43:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
| EN 12697-46:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests |
| EN 12697-8:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens |
| EN 12697-22:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 12697-41:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 12697-47:2010 | Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts |
| EN 12697-26:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
| EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 12697-37:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA |
| EN ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) |
| EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.