BS EN 12871:2013
Current
The latest, up-to-date edition.
Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
Hardcopy , PDF
English
30-09-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and subscripts
5 General requirements
6 Determination of performance characteristics
7 Evaluation
8 Report
Annex A (normative) - Modification to EN 1195
Annex B (informative) - Proposal for performance requirements
Annex C (informative) - Example
Bibliography
Describes: - Concentrated load test and assessment methods for floor and roof decking; - Soft body impact assessment methods and classification system for floors, roofs and walls.
Committee |
B/541
|
DevelopmentNote |
Supersedes 97/103071 DC. (09/2002) Supersedes 11/30253904 DC. (10/2013)
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies: - concentrated load test and assessment methods for floor and roof decking; - soft body impact assessment methods and classification system for floors, roofs and walls. This European Standard does not include racking testing or uniformly distributed loads as these are covered by testing according to EN 594 or calculation according to EN 1995-1-1 respectively. This European Standard specifies the procedure for determining the performance characteristics through type testing, of load-bearing wood-based panels fitted on: a) structural joists for decking: 1) in flooring applications in load categories A, B, C and D; 2) in roof applications in load categories H and I; for which type testing involves: i) punching shear under concentrated loading; ii) vertical soft body impact; b) studs for walling application for which type testing involves: 1) pendular soft body impact. Annex A (normative) lists modifications to EN 1195, particularly the contact area of the loading head that may be used for concentrated loading. Annex B (informative) provides proposals for national performance requirements. Annex C (informative) provides examples for a decking application in a floor and a roof.
Standards | Relationship |
UNI EN 12871 : 2013 | Identical |
DIN EN 12871:2013-09 | Identical |
NF EN 12871 : 2013 | Identical |
NEN EN 12871 : 2013 | Identical |
SN EN 12871 : 2013 | Identical |
NS EN 12871 : 2013 | Identical |
EN 12871:2013 | Identical |
I.S. EN 12871:2013 | Identical |
NBN EN 12871 : 2013 | Identical |
UNE-EN 12871:2013 | Identical |
BS 5268-2:2002 | Structural use of timber Code of practice for permissible stress design, materials and workmanship |
EN 635-2:1995 | Plywood - Classification by surface appearance - Part 2: Hardwood |
EN 13353:2008+A1:2011 | Solid wood panels (SWP) - Requirements |
EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
CEN/TS 1099:2007 | Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes |
EN 13017-1:2000 | Solid wood panels - Classification by surface appearance - Part 1: Softwood |
EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
EN 1328:1996 | Cement bonded particleboards - Determination of frost resistance |
EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
EN 1156:2013 | Wood-based panels - Determination of duration of load and creep factors |
EN 312:2010 | Particleboards - Specifications |
EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
EN 635-1:1994 | Plywood - Classification by surface appearance - Part 1: General |
EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
EN 13017-2:2000 | Solid wood panels - Classification by surface appearance - Part 2: Hardwood |
EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
EN 13354:2008 | Solid wood panels (SWP) - Bonding quality - Test method |
EN 313-1:1996 | Plywood - Classification and terminology - Part 1: Classification |
EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
EN 313-2:1999 | Plywood - Classification and terminology - Part 2: Terminology |
EN 314-2:1993 | Plywood - Bonding quality - Part 2: Requirements |
EN 635-3:1995 | Plywood - Classification by surface appearance - Part 3: Softwood |
EN 634-2:2007 | Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
EN 636:2012+A1:2015 | Plywood - Specifications |
EN 314-1:2004 | Plywood - Bonding quality - Part 1: Test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.