BS EN 1287:2017
Current
The latest, up-to-date edition.
Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification
Hardcopy , PDF
English
04-09-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
B/504
|
| DevelopmentNote |
Supersedes BS 1415-2(1986). (09/1999) Supersedes 94/102007 DC. (08/2005) Supersedes 15/30321799 DC. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies general construction, performance and material requirements for PN 10 thermostatic mixing valves (TMV) and includes test methods for the verification of mixed water temperature performance at the point of use below 45 °C. This does not exclude the selection of higher temperatures where available. When these devices are used to provide anti-scald protection for children, elderly and disabled persons the mixed water temperature needs to be set at a suitable bathing temperature (body temperature - 38 °C) as children are at risk to scalding at lower temperatures than adults. This does not obviate the need for supervision of young children during bathing. It applies to valves intended for use on sanitary appliances in kitchens, washrooms (incl. all rooms with sanitary tapware, e.g. toilet and cloakrooms) and bathrooms operating under the conditions specified in Table 1. This standard allows TMVs to supply a single outlet or a small number of outlets in a \'domestic\' application (e.g. one valve, controlling a shower, bath, basin and/or, bidet), excluding valves specifically designed for supplying a large number of outlets (i.e. for institutional use). The tests described are type tests (laboratory tests) and not quality control tests carried out during manufacture. Table 1 - Conditions of use
| Standards | Relationship |
| DIN EN 1287:2015-07 (Draft) | Identical |
| UNE-EN 1287:2000 | Identical |
| EN 1287:2017 | Identical |
| I.S. EN 1287:2017 | Identical |
| NF EN 1287 : 2017 | Identical |
| NBN EN 1287 : 1999 | Identical |
| UNI EN 1287 : 2002 | Identical |
| NEN EN 1287 : 2017 | Identical |
| NS EN 1287 : 2017 | Identical |
| DIN EN 1287:2017-10 | Identical |
| 15/30253829 DC : 0 | BS 3632 - RESIDENTIAL PARK HOMES - SPECIFICATION |
| BS 6465-3:2006 | Sanitary installations Code of practice for the selection, installation and maintenance of sanitary and associated appliances |
| BS 7942:2000 | Thermostatic mixing valves for use in care establishments |
| BS 5918:2015 | Solar heating systems for domestic hot water. Code of practice for design and installation |
| BS 7942:2011 | Thermostatic mixing valves for use in care establishments. Requirements and test methods |
| 11/30218883 DC : 0 | BS 8542 - CALCULATING WATER CONSUMPTION IN NON-DOMESTIC BUILDINGS - CODE OF PRACTICE |
| BS 8542:2011 | Calculating domestic water consumption in non-domestic buildings. Code of practice |
| 09/30182723 DC : 0 | BS 7942 - THERMOSTATIC MIXING VALVES FOR USE IN CARE ESTABLISHMENTS - REQUIREMENTS AND TEST METHODS |
| PD 6504:1983 | Medical information on human reaction to skin contact with hot surfaces |
| EN 246:2003 | Sanitary tapware - General specifications for flow rate regulators |
| EN 1112:2008 | Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 13618:2016 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| EN 1113:2015 | Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 14506:2005 | Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |
| ISA MC96.1 : 1982 | TEMPERATURE MEASUREMENT THERMOCOUPLES |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| EN 13959:2004 | Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
| EN 200:2008 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
| ISO 9886:2004 | Ergonomics Evaluation of thermal strain by physiological measurements |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 248:2002 | Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.