BS EN 12540:2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
Hardcopy , PDF
31-08-2009
English
15-07-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designation
5.1 General
5.2 Coating type
6 Heat treatment
7 Inspection
7.1 Coating requirements
7.2 Test methods
Annex A (normative) Correlation between service condition
number and individual item block for
standardized coating systems
Annex B (informative) Service condition number
Annex C (informative) Examples of designations
Annex D (normative) Double-and triple-layer nickel coatings
Annex E (normative) Determination of the number of
discontinuities in chromium coatings
Annex F (informative) Thickness test methods for coatings
Annex G (informative) Corrosion resistance of nickel coatings
Bibliography
The purchaser has to specify the electrodeposited coating using the designation given in BS EN 1403.
| Committee |
STI/33
|
| DevelopmentNote |
Supersedes BS 1224(1970). (06/2000) Supersedes 96/124864 DC. (08/2005)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 12540:2000 | Identical |
| UNI EN 12540 : 2000 | Identical |
| NEN EN 12540 : 2000 | Identical |
| UNE-EN 12540:2001 | Identical |
| NF EN 12540 : 2000 | Identical |
| EN 12540 : 2000 | Identical |
| SN EN 12540 : 2000 | Identical |
| DIN EN 12540:2000-07 | Identical |
| NBN EN 12540 : 2000 | Identical |
| NS EN 12540 : 2000 | Identical |
| 07/30172431 DC : DRAFT OCT 2007 | BS 4211 AMD1 - SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| DEFSTAN 07-207/2(2009) : 2009 | REQUIREMENTS FOR PADLOCKS (GENERAL PURPOSE) |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| 08/30177880 DC : DRAFT JUNE 2008 | BS 1685 - BEVEL PROTRACTORS (MECHANICAL AND OPTICAL) - REQUIREMENTS AND TEST METHODS |
| 02/107760 DC : DRAFT DEC 2002 | BS 4211 - SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| DEFSTAN 02-128/2(2008) : 2008 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS |
| 08/30176707 DC : DRAFT APR 2008 | BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
| DEFSTAN 21-5/2(2004) : 2004 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| BS 5991:2006 | Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
| BS 1685:2008 | Bevel protractors (mechanical and optical). Requirements and test methods |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS 5990:2006 | Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 21-5/3(2009) : 2009 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| BS 4211(2005) : 2005 | SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| ISO 4526:2004 | Metallic coatings Electroplated coatings of nickel for engineering purposes |
| EN ISO 1462 : 1995 | METALLIC COATINGS - COATINGS OTHER THAN THOSE ANODIC TO THE BASIS METAL - ACCELERATED CORROSION TESTS - METHOD FOR THE EVALUATION OF THE RESULTS |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| ISO 1462:1973 | Metallic coatings Coatings other than those anodic to the basis metal Accelerated corrosion tests Method for the evaluation of the results |
| ISO 4541:1978 | Metallic and other non-organic coatings Corrodkote corrosion test (CORR test) |
| EN ISO 4541:1994 | Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978) |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| ISO 2361:1982 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method |
| EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| EN ISO 8401:2017 | Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017) |
| ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
| ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
| EN ISO 2361:1995 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
| EN ISO 2177:2004 | Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:2003) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 6158:2011 | Metallic and other inorganic coatings Electrodeposited coatings of chromium for engineering purposes |
| ISO 2177:2003 | Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution |
| EN 1403:1998 | Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements |
| ISO 8401:2017 | Metallic coatings — Review of methods of measurement of ductility |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.