BS EN 12449:2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Copper and copper alloys. Seamless, round tubes for general purposes
Hardcopy , PDF
30-11-2019
English
31-05-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and
inspection documentation
10 Marking, packaging, labelling
Bibliography
Defines the composition, property requirements and tolerances on dimensions and form for seamless round drawn copper and copper alloy tubes for general purposes supplied in the size range from 3 mm up to and including 450 mm outside diameter and from 0,3 mm up to and including 20 mm wall thickness.
| Committee |
NFE/34
|
| DevelopmentNote |
Supersedes BS 2871-2(1972). (10/1999) Supersedes 96/708643 DC. (08/2005) Supersedes 11/30239433 DC. (05/2012)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for seamless round drawn copper and copper alloy tubes for general purposes supplied in the size range from 3mm up to and including 450mm outside diameter and from 0,3mm up to and including 20mm wall thickness. The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified. NOTE Tubes having an outside diameter less than 80mm and/or a wall thickness greater than 2mm in certain alloys are most frequently used for free machining purposes which are specified in EN12168 .
| Standards | Relationship |
| DIN EN 12449:2015-11 (Draft) | Identical |
| EN 12449:2016 | Identical |
| NEN EN 12449 : 2016 | Identical |
| SN EN 12449:2016 | Identical |
| UNI EN 12449 : 2012 | Identical |
| ONORM EN 12449 : 2016 | Identical |
| I.S. EN 12449:2016 | Identical |
| NBN EN 12449 : 2016 | Identical |
| NF EN 12449 : 2016 | Identical |
| NS EN 12449 : 2016 | Identical |
| UNE-EN 12449:2016 | Identical |
| DIN EN 12449:1999-10 | Identical |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| 12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
| BS 1566-1(2002) : 2002 | COPPER INDIRECT CYLINDERS FOR DOMESTIC PURPOSES - PART 1: OPEN VENTED COPPER CYLINDERS - REQUIREMENTS AND TEST METHODS |
| BS 4368-1(1998) : 1998 | METALLIC TUBE CONNECTORS FOR FLUID POWER AND GENERAL USE - PART 1: SPLIT COLLET COMPRESSION FITTINGS |
| BS 7430(2011) : 2011 | CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
| 16/30353337 DC : 0 | PD 5500:2015+A3 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| 11/30249994 DC : DRAFT JULY 2011 | BS 7430 - CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
| 11/30244843 DC : 0 | BS 5306-4:2001+A1 - FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - PART 4: SPECIFICATION FOR CARBON DIOXIDE SYSTEMS |
| BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 5306-4(2001) : 2001 | FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - PART 4: SPECIFICATION FOR CARBON DIOXIDE SYSTEMS |
| BS 6739:2009 | Code of practice for instrumentation in process control systems: installation design and practice |
| BS PD5500(2018) : 2018 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 5306-4:2001+A1:2012 | Fire extinguishing installations and equipment on premises Specification for carbon dioxide systems |
| PD 54823:2016 | Guidance for the design, commissioning and maintenance of LPG systems in small craft |
| DEFSTAN 02-330/2(2007) : 2007 | REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES |
| 10/30213423 DC : 0 | BS 8537 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - SPECIFICATION FOR FITTINGS WITH PRESS ENDS FOR METALLIC TUBES |
| DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| BS 5502-25:1991 | Buildings and structures for agriculture Code of practice for design and installation of services and facilities |
| EEMUA 234 : 2016 | 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS (SPECIFICATION) |
| BS 10:2009 | Specification for flanges and bolting for pipes, valves and fittings |
| DEFSTAN 02-837/2(2005) : 2005 | REQUIREMENTS FOR COPPER TUBES |
| DEFSTAN 13-95/4(2005) : 2005 | COPPER AND GILDING METAL RINGS FOR DRIVING BANDS |
| 14/30284897 DC : 0 | BS 4368-1(1998) + A1 - METALLIC TUBE CONNECTORS FOR FLUID POWER AND GENERAL USE - PART 1: SPLIT COLLET COMPRESSION FITTINGS |
| DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| 08/30136724 DC : DRAFT MAY 2008 | BS 6739 - CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS - INSTALLATION DESIGN AND PRACTICE |
| DEFSTAN 02-878/1(2011) : 2011 | NON-FERROUS TUBES AND PIPES FOR USE IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
| BS 8537:2010 | Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes |
| 15/30281782 DC : 0 | PD 5482-3 - GUIDANCE FOR THE DESIGN, COMMISSIONING AND MAINTENANCE OF LPG SYSTEMS IN SMALL CRAFT |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 1971-2:2011 | Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| EN ISO 8493:2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 2624:1990 | Copper and copper alloys — Estimation of average grain size |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 16090:2011 | Copper and copper alloys - Estimation of average grain size by ultrasound |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
| EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
| EN 1971-1:2011 | Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 2624:1995 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 196:1978 | Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| EN ISO 196:1995 | Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.