BS EN 12373-1:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aluminium and aluminium alloys. Anodizing Method for specifying decorative and protective anodic oxidation coatings on aluminium
Hardcopy , PDF
31-07-2010
English
15-07-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser to the
anodizer
5 Tests
6 Coating thickness
7 Quality of sealing
8 Quality of cold impregnation
9 Appearance and colour
10 Corrosion resistance
11 Abrasion resistance
12 Resistance to cracking by deformation
13 Fastness to light and light to ultraviolet radiation
14 Light reflection properties
15 Electric breakdown potential
16 Continuity of the coating
17 Mass per unit area (surface density) of the coating
Annex A (informative) Guide to grades of aluminium for
anodizing
Annex B (informative) Guidance on surface preparation
Annex C (normative) Interpretation of average and local
thickness requirements
Annex D (informative) Guidance on the choice of coating
thickness class
Annex E (informative) Guidance on cleaning materials for
external architectural applications
Bibliography
Refers to the method for specifying decorative and protective anodic oxidation coatings on aluminium.
| Committee |
STI/33
|
| DevelopmentNote |
Supersedes BS 1615(1987). (06/2001) Supersedes 97/121101 DC. (08/2005) Reviewed and Confirmed by BSI, May 2007. (04/2007)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 12373-1:2002 | Identical |
| NS EN 12373-1 : 2001 | Identical |
| NF EN 12373-1 : 2001 | Identical |
| DIN EN 12373-1:2001-10 | Identical |
| I.S. EN 12373-1:2001 | Identical |
| EN 12373-1 : 2001 | Identical |
| NEN EN 12373-1 : 2001 | Identical |
| SN EN 12373-1 : 2001 | Identical |
| UNI EN 12373-1 : 2002 | Identical |
| NBN EN 12373-1 : 2001 | Identical |
| 09/30166898 DC : 0 | BS 559 - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF SIGN INSTALLATIONS |
| 08/30143158 DC : DRAFT AUG 2008 | BS 644 - TIMBER WINDOWS - FULLY FINISHED FACTORY ASSEMBLED WINDOWS OF VARIOUS TYPES - SPECIFICATION |
| DEFSTAN 02-862(PT3)/2(2007) : 2007 | FASTENERS - PART 3: NON-FERROUS FASTENERS |
| DEFSTAN 02-862(PT1)/3(2011) : 2011 | NAVAL FASTENERS - PART 1: MATERIAL SELECTION AND USE |
| BS 559:2009 | Specification for the design and construction of signs for publicity, decorative and general purposes |
| 08/30176707 DC : DRAFT APR 2008 | BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS 644:2009 | Timber windows. Fully finished factory-assembled windows of various types. Specification |
| 07/30172431 DC : DRAFT OCT 2007 | BS 4211 AMD1 - SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| 08/30143160 DC : DRAFT AUG 2008 | BS 4873 - ALUMINIUM ALLOY WINDOWS AND DOOR SETS - SPECIFICATION |
| BS 4873:2009 | Aluminium alloy windows and doorsets. Specification |
| BS 4211(2005) : 2005 | SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| EN 12373-9:1998 | Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
| EN 12373-13 : 2000 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 13: MEASUREMENT OF REFLECTANCE CHARACTERISTICS OF ALUMINIUM SURFACES USING A GONIOPHOTOMETER OR AN ABRIDGED GONIOPHOTOMETER |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| EN 12373-15 : 2000 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 15: ASSESSMENT OF RESISTANCE OF ANODIC OXIDATION COATINGS TO CRACKING BY DEFORMATION |
| EN 12373-6 : 1998 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 6: ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF THE LOSS OF MASS AFTER IMMERSION IN PHOSPHORIC ACID/CHROMIC ACID SOLUTION WITHOUT PRIOR ACID TREATMENT |
| EN 12373-2:1998 | Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| ISO 10074:2010 | Anodizing of aluminium and its alloys Specification for hard anodic oxidation coatings on aluminium and its alloys |
| EN 12373-19:2001 | Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion - Grid method |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| EN 12373-3 : 1998 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 3: DETERMINATION OF THICKNESS OF ANODIC OXIDATION COATINGS - NON-DESTRUCTIVE MEASUREMENT BY SPLIT-BEAM MICROSCOPE |
| EN 12373-18 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 18: RATING SYSTEM FOR THE EVALUATION OF PITTING CORROSION - CHART METHOD |
| EN 12373-4 : 1998 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 4: ESTIMATION OF LOSS OF ABSORPTIVE POWER OF ANODIC OXIDATION COATINGS AFTER SEALING BY DYE SPOT TEST WITH PRIOR ACID TREATMENT |
| EN 12373-7 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 7: ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF THE LOSS OF MASS AFTER IMMERSION IN PHOSPHORIC ACID/CHROMIC ACID SOLUTION WITH PRIOR ACID TREATMENT |
| EN 12373-17 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 17: DETERMINATION OF ELECTRIC BREAKDOWN POTENTIAL |
| EN 12373-16 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 16: CHECK FOR CONTINUITY OF THIN ANODIC OXYDATION COATINGS - COPPER SULFATE TEST |
| EN 12373-12:2000 | Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 12373-14 : 2000 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 14: VISUAL DETERMINATION OF IMAGE CLARITY OF ANODIC OXIDATION COATINGS - CHART SCALE METHOD |
| EN 12373-10:1998 | Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| EN 12373-5 : 1998 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 5: ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF ADMITTANCE |
| EN 12373-11:2000 | Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.