BS EN 12285-1:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
Hardcopy , PDF
07-05-2019
English
19-01-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Designation and purchaser's specification
6 Materials
6.1 General
6.2 Materials for shell, dished ends and manholes
6.3 Materials for tank accessories
6.4 Consumable
6.5 Material inspection documentation
7 Design
7.1 Forms of construction
7.2 Single skin tanks
7.3 Double skin tanks
7.4 Dished ends
7.5 Compartments
7.6 Dimensions
7.6.1 Material thickness
7.6.2 Secondary skin
7.6.3 Interstitial space
7.7 Tolerances
7.8 Shell plate arrangement
7.9 Manholes and inspection covers
7.10 Structural bolts
7.11 Tank fittings, pipes and nozzles
7.12 Stiffening rings
7.13 Lifting lugs
8 Fabrication
8.1 Plate preparation
8.2 Shell plate forming
8.3 Types of joints
8.4 Welding procedures, welders' qualifications
8.5 External coating
9 Testing
9.1 General
9.2 Pressure testing
9.3 Testing of the external coating
10 Handling and installation
10.1 Handling
10.2 Installation
11 Marking of the tank and manufacturer's statement
11.1 Marking of the tank
11.2 Manufacturer's statement
11.3 Drawings
Annex A (informative) Transport, storage and installation
procedure
Annex B (informative) Evaluation of liquid-material-combinations
for storage tanks according to this standard
Annex C (informative) A-deviations
Bibliography
Describes the requirements for shop fabricated cylindrical, horizontal steel tanks, single and double skin for the underground storage of water polluting liquids (both flammable and non-flammable).
| CommentClosesDate |
24-04-2019
|
| Committee |
PVE/15
|
| DevelopmentNote |
Supersedes 96/700348 DC (08/2003) Together with BS EN 12285-2, supersedes BS 2594(1975). (01/2006)
|
| DocumentType |
Standard
|
| Pages |
162
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 12285-1:2003 | Identical |
| EN 12285-1:2003 | Identical |
| NEN EN 12285-1 : 2003 | Identical |
| UNI EN 12285-1 : 2003 | Identical |
| NS EN 12285-1 : 1ED 2003 | Identical |
| NBN EN 12285-1 : 2003 | Identical |
| SN EN 12285-1 : 2003 | Identical |
| DIN EN 12285-1:2016-10 (Draft) | Identical |
| ONORM EN 12285-1 : 2003 | Identical |
| NF EN 12285-1 : 2003 | Identical |
| UNE-EN 12285-1:2004 | Identical |
| 12/30258579 DC : 0 | BS 5908-1 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 1: CODE OF PRACTICE FOR PRECAUTIONS AGAINST FIRE AND EXPLOSION IN CHEMICAL PLANTS, CHEMICAL STORAGE AND SIMILAR PREMISES |
| 17/30351608 DC : 0 | BS 5410-2 - CODE OF PRACTICE FOR OIL FIRING - PART 2: INSTALLATIONS PROVIDING SPACE HEATING, HOT WATER AND STEAM SUPPLY SERVICES TO NON-DOMESTIC BUILDINGS |
| BS 5410-1:2014 | Code of practice for oil firing Installations up to 45 kW output capacity for space heating and hot water supply purposes |
| BS 5410-3:2016 | Code of practice for oil firing Installations for furnaces, kilns, ovens, oil-fuelled generators and other industrial purposes |
| BS 799-5:2010 | Oil burning equipment Carbon steel oil storage tanks. Specification |
| BS 5908-1:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises |
| 15/30319437 DC : 0 | BS 5410-3 - CODE OF PRACTICE FOR OIL FIRING - PART 3: INSTALLATIONS FOR FURNACES, KILNS, OVENS, OIL-FUELLED STANDBY GENERATORS AND OTHER INDUSTRIAL PURPOSES |
| 14/30285453 DC : 0 | BS 5410-1 - CODE OF PRACTICE FOR OIL FIRING - PART 1: INSTALLATIONS UP TO 45 KW OUTPUT CAPACITY FOR SPACE HEATING AND HOT WATER SUPPLY PURPOSES |
| 12/30170835 DC : 0 | BS 5410-2 - CODE OF PRACTICE FOR OIL FIRING - PART 2: SPACE HEATING, HOT WATER AND STEAM SUPPLY SERVICES FOR COMMERCIAL AND INDUSTRIAL PREMISES |
| BS 5410-2:2013 | Code of practice for oil firing Installations over 45 kW output capacity for space heating, hot water and steam supply services |
| PREN 13160-2 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 2: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PRESSURE AND VACUUM SYSTEMS |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| PREN 13160-1 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| PREN 13160-6 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 6: SENSORS IN MONITORING WELLS |
| PREN 13160-3 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| PREN 13160-7 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| PREN 13160-5 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| EN 10055:1995 | Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
| PREN 13160-4 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.