BS EN 10336:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions
Hardcopy , PDF
31-03-2009
BS EN 10152:2009
BS EN 10346:2015
BS EN 10152:2017
BS EN 10346:2009
English
31-05-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 Manufacturing process
7 Requirements
7.1 Chemical composition
7.2 Mechanical properties
7.3 Requirements for coatings
7.4 Tolerances on dimensions and shape
7.5 Suitability for further processing
8 Testing
8.1 General
8.2 Test units
8.3 Number of tests
8.4 Sampling
8.5 Test methods
8.6 Retests
8.7 Inspection documents
9 Marking
10 Packing
11 Storage and transportation
12 Disputes
Annex A (normative) Reference method for determination
of the zinc coating mass
Annex B (normative) Reference method for determination
of the zinc-nickel coating mass and the zinc-nickel
coating composition for electrolytically coated
products
Bibliography
Describes requirements for continuously hot-dip coated and electrolytically coated flat products made of multiphase steels for cold forming coated with zinc, zinc-iron alloy or zinc-nickel alloy with thicknesses of 0, 35 mm to 3, 0 mm.
| Committee |
ISE/109
|
| DevelopmentNote |
Supersedes 02/713774 DC. (05/2007)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 10336:2008 | Identical |
| NF EN 10336 : 2007 | Identical |
| I.S. EN 10336:2007 | Identical |
| NEN EN 10336 : 2008 | Identical |
| EN 10336:2007 | Identical |
| SN EN 10336 : 2007 | Identical |
| NS EN 10336 : 1ED 2007 | Identical |
| UNI EN 10336 : 2007 | Identical |
| NBN EN 10336 : 2007 | Identical |
| DIN EN 10336:2007-07 | Identical |
| ISO 10275:2007 | Metallic materials Sheet and strip Determination of tensile strain hardening exponent |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 10079:2007 | Definition of steel products |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 10271:1998 | Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
| EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 14713:1999 | Protection against corrosion of iron and steel in structures Zinc and aluminium coatings Guidelines |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN ISO 14713 : 1999 | PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES |
| EN 10325:2006 | Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index] |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.