BS EN 10301:2003
Current
The latest, up-to-date edition.
Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
Hardcopy , PDF
English
17-09-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
ISE/110
|
| DevelopmentNote |
Supersedes 98/711668 DC (09/2003) Reviewed and Confirmed by BSI, August 2007. (07/2007)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the application requirements and methods of test of liquid applied epoxy paints on the internal surface for the reduction of friction of tubes and pipeline fittings for conveyance of non-corrosive gas. Other paints or paint systems are not excluded provided they comply with the requirements given in this standard. The coating consist of one layer of liquid product, normally shop applied onto abrasive blast cleaned steel by airless spray or conventional spray techniques. Brush application may be used only for repairs. The coating qualified in accordance with this standard is considered suitable for operating temperatures between - 20 °C and + 110 °C. In this European Standard the word \'components\' is used for tubes and fittings.
| Standards | Relationship |
| NBN EN 10301 : 2003 | Identical |
| NEN EN 10301 : 2003 | Identical |
| NF EN 10301 : 2004 | Identical |
| SN EN 10301 : 2003 | Identical |
| UNI EN 10301 : 2003 | Identical |
| EN 10301:2003 | Identical |
| NS EN 10301 : 1ED 2003 | Identical |
| UNE-EN 10301:2004 | Identical |
| I.S. EN 10301:2003 | Identical |
| DIN EN 10301:2004-01 | Identical |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 7253 : 2001 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 6860:2006 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
| EN ISO 1514:2016 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| ISO 2811:1974 | Paints and varnishes — Determination of density |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.