BS EN 10288:2002
Current
The latest, up-to-date edition.
Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
Hardcopy , PDF
English
10-05-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4 Classification of coatings
5 Information to be supplied by the purchaser
5.1 Mandatory
5.2 Options to be indicated by the purchaser
6 Documents
7 Application of the coating
7.1 Surface preparation
7.2 Composition of the coating
8 Requirements of the applied coating
8.1 General
8.2 Appearance and continuity
8.3 Thickness of the coating system
8.4 Cut back at the ends
8.5 Holiday detection
8.6 Impact resistance
8.7 Peel force
8.8 Indentation resistance
8.9 Electrical insulation resistance
8.10 Elongation at break
8.11 Resistance to ultraviolet irradiation
8.12 Thermal stability
8.13 Cathodic disbondment
8.14 Flexibility
9 Inspection
9.1 Document
9.2 Sampling
9.3 Nature and frequency of testing and control
9.4 Retests
10 Repairs
11 Marking
12 Handling, transportation and storage
12.1 Handling
12.2 Transportation to the storage area
12.3 Storage
12.4 Loading of tubes and components for delivery
Annex A (normative) Inspection of thickness
A.1 General
A.2 Apparatus
A.3 Procedure
A.4 Results
Annex B (normative) Holiday detection test
B.1 General
B.2 Apparatus
B.3 Procedure
B.4 Results
Annex C (normative) Impact test
C.1 General
C.2 Apparatus
C.3 Procedure
C.4 Results
Annex D (normative) Peel force test
D.1 Measurement of the peeling force on a coated
sample (type 1)
D.2 Measurement of the peel strength on large diameter
tube (type 2)
Annex E (normative) Indentation test
E.1 General
E.2 Apparatus
E.3 Procedure
E.4 Results
Annex F (normative) Specific electrical insulation
resistance test
F.1 General
F.2 Apparatus
F.3 Procedure
F.4 Results
Annex G (normative) Elongation at break test
G.1 General
G.2 Apparatus
G.3 Sampling
G.4 Procedure
G.5 Results
Annex H (normative) Ultraviolet irradiation and thermal
stability tests
H.1 Resistance to ultraviolet radiation
H.2 Thermal stability
Annex J (normative) Cathodic disbondment test
J.1 General
J.2 Apparatus
J.3 Sampling
J.4 Procedure
J.5 Results
Annex K (normative) Types of inspection documents
Annex L (informative) A-Deviation
Bibliography
Specifies the application of factory applied external two layer extruded polyethylene based coatings for the corrosion protection of tubes and pipeline components.
| Committee |
ISE/110
|
| DevelopmentNote |
Supersedes 96/709745 DC (05/2002)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard defines the application of factory applied external two layer extruded polyethylene based coatings for the corrosion protection of tubes and pipeline components. External extruded polyethylene coating can be used for the protection of buried or submerged tubes service at temperatures up to + 60 °C for type 1 and + 30 °C for type 2. The coatings in this standard can be applied to longitudinally or spirally welded and to seamless steel tubes and components used for the construction of pipelines for conveying liquids or gases. Tubes coated with this type of coating may be further protected by means of cathodic protection.
| Standards | Relationship |
| UNI EN 10288 : 2003 | Identical |
| NS EN 10288 : 1ED 2002 | Identical |
| NBN EN 10288 : 2002 | Identical |
| NF EN 10288 : 2002 | Identical |
| I.S. EN 10288:2002 | Identical |
| SN EN 10288 : 2003 | Identical |
| EN 10288:2002 | Identical |
| UNE-EN 10288:2002 | Identical |
| NEN EN 10288 : 2002 | Identical |
| DIN EN 10288:2003-12 | Identical |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 11420:1996 | Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.