BS EN 10051:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape
Hardcopy , PDF
17-04-2024
English
31-12-2010
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Form of supply
6 Tolerances for sheet/plate
7 Tolerances for wide strip and strip split from wide strip
8 Measurement
Annex A (informative) - Standards with steel grades for this
dimensional standard
Annex B (normative) - Options
Defines tolerances on dimensions and shape for continuously hot-rolled uncoated plate/sheet and strip with a maximum width of 2200 mm of non-alloy and alloy steels.
Committee |
ISE/103
|
DevelopmentNote |
Supersedes 89/42223 DC and 95/713700 DC. (08/2004) Supersedes BS 1449-1.6(1991) and BS 1501-3(1990). (07/2005) Together with BS EN 10029, BS EN 10048, BS EN 10088-2 and BS EN 10095, supersedes BS 1449-2(1983). (02/2008) Supersedes 09/30200092 DC. (12/2010)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This European Standard specifies tolerances on dimensions and shape for continuously hot-rolled uncoated plate/sheet and strip with a maximum width of 2 200 mm of non-alloy and alloy steels in accordance with Table 1 (see also Annex A). This European Standard also applies to hot-rolled strip for cold rolling. Table 1 Field of application Product Thickness
mm Steel grades according to:
(but not limited to) wide strip (width: 600 mm ≤ w ≤ 2 200 mm),Sheet/Plate cut from wide strip,strip w < 600 mm slit from wide strip ≤ 25 mm EN 10025-2 to -6,EN 10028-2 to -6,EN 10083-2 and -3,EN 10084, EN 10085,EN 10111,EN 10120, EN 10149-2 and -3,EN 10207,prEN 10338,EN ISO 4957. This European Standard does not apply to stainless steels and not to hot-rolled strip rolled in widths w < 600 mm (see EN 10048).
Standards | Relationship |
NEN EN 10051 : 2010 | Identical |
EN 10051:2010 | Identical |
UNI EN 10051 : 2011 | Identical |
NF EN 10051 : 2011 | Identical |
UNE-EN 10051:2012 | Identical |
SN EN 10051 : 2011 | Identical |
I.S. EN 10051:2010 | Identical |
NBN EN 10051 : 2011 | Identical |
NS EN 10051 : 2010 | Identical |
ONORM EN 10051 : 2011 | Identical |
03/300415 DC : DRAFT JAN 2003 | BS XXXX - MECHANICAL DESIGN AND POWER REQUIREMENTS FOR TROUGHED BELT CONVEYORS |
15/30270868 DC : DRAFT FEB 2015 | BS 6635 - MANUFACTURE OF SADDLE TREES MADE FROM WOOD - SPECIFICATION |
BS 8612:2018 | Dry fixed ridge, hip, and verge systems for slating and tiling. Specification |
DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
BS 8499:2017 | Specification for domestic gas meter boxes and meter bracket |
BS 6635:2015 | Manufacture of saddle trees made from wood. Specification |
BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
BS 6635:2003 | Manufacture of saddle trees made from wood. Specification |
BS 1722-12:1999 | Fences Specification for steel palisade fences |
BS 1722-12:2006 | Fences Specification for steel palisade fences |
17/30324405 DC : 0 | BS 8612 - DRY-FIXED RIDGE, HIP, AND VERGE SYSTEMS FOR SLATING AND TILING - SPECIFICATION |
DEFSTAN 95-24/2(2002) : 2002 | ARMOUR PLATE, STEEL (3-160 MM) |
BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
BS 8499:2009 | Specification for domestic gas meter boxes and meter bracket |
DEFSTAN 02-128/2(2008) : 2008 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS |
DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
BS 7608(2014) : 2014 | GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
BS 1501-3:1990 | Steels for pressure purposes Specification for corrosion- and heat-resisting steels: plates, sheet and strip |
BS 5950-2:2001 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 2: SPECIFICATION FOR MATERIALS, FABRICATION AND ERECTION - ROLLED AND WELDED SECTIONS |
BS 6779-1:1998 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction |
DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-320/4(2015) : 2015 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
DEFSTAN 02-121(PT1)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
13/30102062 DC : 0 | BS 7608:2013 - GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-320/3(2009) : 2009 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-320/2(2002) : INTERIM | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-121(PT1)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
02/105033 DC : DRAFT AUG 2002 | BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
09/30160438 DC : DRAFT JAN 2009 | BS 8499 - SPECIFICATION FOR DOMESTIC GAS METER BOXES AND METER BRACKET |
DEFSTAN 02-329/2(2005) : 2005 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10079:2007 | Definition of steel products |
EN 10020:2000 | Definition and classification of grades of steel |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.