BS EN 10002-1:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Tensile testing of metallic materials Method of test at ambient temperature
Available format(s)
Hardcopy , PDF
Superseded date
31-08-2009
Superseded by
Language(s)
English
Published date
06-09-2001
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Cooperating organizations
National foreword
Brief history
Foreword
1 Object and field of application
2 References
3 Principle
4 Definitions
4.1 Gauge length (L)
4.2 Parallel length (Lc)
4.3 Elongation
4.4 Percentage elongation
4.5 Extensometer gauge length (Le)
4.6 Extension
4.7 Percentage reduction of area (Z)
4.8 Maximum force (Fm)
4.9 Stress
5 Symbols and designations
6 Test pieces
6.1 Shape and dimensions
6.2 Types
6.3 Preparation of test pieces
7 Determination of original cross-sectional area
(So)
8 Marking the original gauge length (Lo)
9 Accuracy of testing apparatus
10 Conditions of testing
10.1 Rate of the machine
10.2 Method of gripping
11 Determination of percentage elongation after
fracture (A)
12 Determination of proof strength (non-proportional
extension) (Rp)
13 Determination of proof strength (total extension)
(Rt)
14 Method of verification of permanent set strength
(Rr)
15 Test report
Annex A Types of test piece to be used for thin
products: steets, strips and flats between 0,1
mm and 3 mm thick
Annex B Types of test piece to be used in the case of
wire, bars and sections with a diameter or
thickness of less than 4 mm
Annex C Types of test piece to be used in the case of
sheets and flats of thickness equal to or
greater than 3 mm, and wire, bars and sections
of diameter or thickness equal to or greater
than 4 mm
Annex D Types of test piece to be used in the case of
tubes
Annex E Measurement of percentage elongation after
fracture, based on sub-division of the original
gauge length
Annex F List of national standards corresponding to
reference Euronorm 18
National appendix A
National appendix B
Describes the method for tensile testing of metallic materials and defines the mechanical properties which can be determined thereby at ambient temperature. Cover references, principle, definitions, symbols and designations, test pieces, determination of original cross sectional area, marking the original gauge length, accuracy of testing apparatus, conditions of testing, determination of percentage elongation after fracture, determination of proof strength, method of verification of permanent set strength, and test report.
| Committee |
ISE/101
|
| DevelopmentNote |
Supersedes 98/706641 DC (11/2003) Reviewed and confirmed by BSI, September 2007. (09/2007)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 10002-1 : 2001 | Identical |
| SN EN 10002-1 : 2001 | Identical |
| NEN EN 10002-1 : 2001 | Identical |
| NS EN 10002-1 : 2001 | Identical |
| DIN EN 10002-1:2001-12 | Identical |
| UNE-EN 10002-1:2002 | Identical |
| NBN EN 10002-1 : 2002 | Identical |
| I.S. EN 10002-1:2001 | Identical |
| EN 10002-1 : 2001 | Identical |
| UNI EN 10002-1 : 2004 | Identical |
| BS 7861-1:1996 | Strata reinforcement support system components used in coal mines Specification for rockbolting |
| DEFSTAN 13-47/4(2005) : 2005 | STEEL FOR SHELL BODIES AND PROOF SHOT |
| BS 7870-5:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution |
| 07/30143023 DC : DRAFT MAR 2007 | BS 7835 - ELECTRIC CABLES - ARMOURED CABLES WITH THERMOSETTING INSULATION FOR RATED VOLTAGES FROM 3.8/6.6 KV TO 19/33 KV HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE - REQUIREMENTS AND TEST METHODS |
| BS EN 60889:1997 | Hard drawn aluminium wire for overhead line conductors |
| DEFSTAN 02-747(PT3)/1(2000) : 2000 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 3: NICKEL ALUMINIUM BRONZE COMMERCIAL ALLOY INGOTS AND SAND CASTINGS |
| DEFSTAN 02-833(PT1)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 1: SHEET, STRIP AND PLATE |
| BS 7884:1997 | Specification for copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems |
| BS 6779-3:1994 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of combined metal and concrete construction |
| BS 5950-9:1994 | Structural use of steelwork in building Code of practice for stressed skin design |
| BS 6835-1:1998 | Method for the determination of the rate of fatigue crack growth in metallic materials. Fatigue crack growth rates of above 10<sup>-8</sup> m per cycle |
| DEFSTAN 02-826(PT4)/1(2000) : 2000 | REQUIREMENTS FOR Q2 (NAVY) QUALITY STEEL - PART 4: ROLLED SECTIONS |
| DEFSTAN 95-22/1(1997) : 1997 | ALUMINIUM ALLOY ARMOUR PLATE (HEAT TREATABLE 6-120 MM) |
| BS 5516-1:2004 | Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing |
| BS 7910:1999 | Guide on methods for assessing the acceptability of flaws in metallic structures |
| PD 5500:2000 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| DEFSTAN 02-381(PT2)/1(2000) : 2000 | FORGING AND HEAT TREATMENT OF MAIN PROPULSION GEARS - PART 2: INDUCTION HARDENED GEARS CATEGORY 2 |
| DEFSTAN 95-25/1(2000) : 2000 | ARMOUR QUALITY STEEL CASTINGS |
| BS 4825-1(1991) : 1991 | STAINLESS STEEL TUBES AND FITTINGS FOR THE FOOD INDUSTRY AND OTHER HYGIENIC APPLICATIONS - PART 1: SPECIFICATION FOR TUBES |
| BS 7668:2004 | Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification |
| BS 5892-3(1992) : 1992 | RAILWAY ROLLING STOCK MATERIALS - PART 3: SPECIFICATION FOR MONOBLOC WHEELS FOR TRACTION AND TRAILING STOCK |
| BS 1722-17:2006 | Fences Specification for electric security fences. Design, installation and maintenance |
| DEFSTAN 02-747(PT4)/2(2005) : 2005 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 4: NICKEL ALUMINIUM BRONZE NAVAL ALLOY SAND CASTINGS WITH WELDING RESTRICTED TO THE NON-WETTED SURFACE (CLASS 1 AND 2 CASTINGS ONLY) |
| DEFSTAN 02-304(PT3)/2(2002) : 2002 | SHAFTING SYSTEMS AND PROPULSORS - PART 3: MANUFACTURING AND DETAIL DESIGN REQUIREMENTS FOR PROPULSORS |
| DEFSTAN 02-736(PT4)/2(2004) : 2004 | REQUIREMENTS FOR Q1 (NAVY) QUALITY STEEL - PART 4: ROLLED SECTIONS CATEGORY 2 |
| DEFSTAN 95-33/1(2004) : 2004 | ALUMINIUM ALLOY (7019) FOR STRUCTURAL (NON-ARMOUR) APPLICATIONS |
| DEFSTAN 02-862(PT5)/2(2007) : 2007 | FASTENERS - PART 5: NON-FERROUS (SUBMARINE FIRST LEVEL QUALITY ASSURED) |
| DEFSTAN 95-18/3(2004) : 2004 | ALUMINIUM ALLOY ARMOUR PLATE (5083) |
| DEFSTAN 95-24/2(2002) : 2002 | ARMOUR PLATE, STEEL (3-160 MM) |
| DEFSTAN 02-862(PT3)/2(2007) : 2007 | FASTENERS - PART 3: NON-FERROUS FASTENERS |
| DEFSTAN 95-19/3(2004) : 2004 | ARMOUR HOMOGENEOUS ALUMINIUM ALLOY, HEAT TREATABLE, EXTRUSIONS AND FORGINGS (6 MM THICK AND OVER) |
| DEFSTAN 95-22/3(2003) : 2003 | ALUMINIUM ALLOY ARMOUR PLATE (HEAT TREATABLE 6-120 MM) |
| DEFSTAN 95-32/2(2004) : 2004 | ALUMINIUM ALLOY ARMOUR EXTRUSIONS AND FORGINGS (7019) |
| DEFSTAN 95-18/2(2001) : 2001 | ALUMINIUM ALLOY ARMOUR PLATE (5083) |
| DEFSTAN 02-747(PT1)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 1: NICKEL ALUMINIUM BRONZE NAVAL ALLOY CENTRIFUGALLY CAST |
| DEFSTAN 02-381/1(2009) : 2009 | REQUIREMENTS FOR THE FORGING AND HEAT TREATMENT OF MAIN PROPULSION GEARS |
| DEFSTAN 02-381(PT3)/1(2000) : 2000 | FORGING AND HEAT TREATMENT OF MAIN PROPULSION GEARS - PART 3: NITRIDED GEARS CATEGORY 2 |
| DEFSTAN 95-31/2(2004) : 2004 | ALUMINIUM ALLOY ARMOUR PLATE (7019) |
| DEFSTAN 10-13/3(1999) : 1999 | STEEL FORGINGS FOR GUNS |
| DEFSTAN 95-22/4(2004) : 2004 | ALUMINIUM ALLOY ARMOUR PLATE (HEAT TREATABLE 6-120 MM) |
| DEFSTAN 02-824(PT1)/2(2005) : 2005 | COPPER NICKEL CHROMIUM SAND CASTINGS AND INGOTS - PART 1: PRODUCTION REQUIREMENTS AND WELDING |
| DEFSTAN 10-13/4(2005) : 2005 | STEEL FORGINGS FOR GUNS |
| DEFSTAN 02-833(PT2)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| DEFSTAN 02-862(PT4)/2(2007) : 2007 | FASTENERS - PART 4: FERROUS (SUBMARINE FIRST LEVEL QUALITY ASSURED) |
| DEFSTAN 95-13/3(2006) : 2006 | ARMOUR PLATES FOR PROOF OF PROJECTILE PURPOSES |
| DEFSTAN 95-24/3(2004) : 2004 | ARMOUR PLATE, STEEL (3-160 MM) |
| DEFSTAN 02-736(PT2)/2(2004) : 2004 | REQUIREMENTS FOR Q1 (NAVY) QUALITY STEEL - PART 2: FORGINGS - CATEGORY 2 |
| DEFSTAN 02-177/2(2002) : 2002 AMD 1 2002 | REQUIREMENTS FOR THE MANUFACTURE, TEST AND IDENTIFICATION FOR ITEMS OF SMITHS WORK |
| DEFSTAN 02-848(PT2)/2(2004) : 2004 | REQUIREMENTS FOR CARBON-MANGANESE AND LOW ALLOY STEEL FORGINGS - PART 2: LOW ALLOY STEEL FORGINGS |
| DEFSTAN 95-26/2(2002) : 2002 | SPECIALISED ARMOUR QUALITY STEEL CASTINGS |
| DEFSTAN 95-22/2(2001) : 2001 | ALUMINIUM ALLOY ARMOUR PLATE (HEAT TREATABLE 6-120 MM) |
| DEFSTAN 95-26/3(2006) : 2006 | SPECIALISED ARMOUR QUALITY CASTINGS |
| DEFSTAN 13-47/3(1998) : 1998 AMD 1 2000 | STEEL FOR SHELL BODIES AND PROOF SHOT |
| DEFSTAN 95-17/2(2004) : 2004 | TRACK PINS, INDUCTION HARDENED |
| DEFSTAN 95-19/2(2001) : 2001 | ARMOUR, HOMOGENOUS ALUMINIUM ALLOY, HEAT TREATABLE, EXTRUSIONS AND FORGINGS (6 MM THICK AND OVER) |
| DEFSTAN 02-780(PT2)/2(2009) : 2009 | REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY MATERIAL - PART 2: FORGINGS, FORGE STOCK RODS AND SECTIONS |
| DEFSTAN 02-747(PT2)/2(2004) : 2004 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 2: NICKEL ALUMINIUM BRONZE NAVAL ALLOY INGOTS AND SAND CASTINGS WITH WELDING PERMITTED TO THE WETTED SURFACE |
| DEFSTAN 02-736(PT1)/2(2004) : 2004 AMD 1 2004 | REQUIREMENTS FOR Q1 (NAVY) QUALITY STEEL - PART 1: PLATES - CATEGORY 2 |
| 16/30338263 DC : 0 | BS 1722-17 - FENCES - PART 17: SPECIFICATION FOR ELECTRIC SECURITY FENCES - DESIGN, INSTALLATION AND MAINTENANCE |
| 03/303157 DC : DRAFT FEB 2003 | BS 7448-3 - FRACTURE MECHANICS TOUGHNESS TESTS - PART 3: METHOD FOR DETERMINATION OF FRACTURE TOUGHNESS OF METALLIC MATERIALS AT RATES OF INCREASE IN STRESS INTENSITY FACTOR GREATER THAN 3.0 MPA M[0.5] S[-1] |
| BS 5892-5(1987) : 1987 | RAILWAY ROLLING STOCK MATERIAL (METRIC) - PART 5: SPECIFICATION FOR STEEL BARS FOR RETAINING RINGS FOR TYRED WHEELS |
| BS 7448-3:2005 | Fracture mechanics toughness tests Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1 |
| 06/30143016 DC : DRAFT SEP 2006 | BS 6622 - SPECIFICATION FOR CABLES WITH THERMOSETTING INSULATION FOR RATED VOLTAGES FROM 3.8/6.6 KV TO 19/33 KV |
| BS 7668:1994 | Specification for weldable structural steels. Hot finished structural hollow sections in weather resistant steels |
| BS 5950-6(1995) : 1995 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 6: CODE OF PRACTICE FOR DESIGN OF LIGHT GAUGE PROFILED STEEL SHEETING |
| 02/703583 DC : DRAFT FEB 2002 | BS 7668 - WELDABLE STRUCTURAL STEELS - HOT FINISHED STRUCTURAL HOLLOW SECTIONS IN WEATHER RESISTANT STEELS |
| DEFSTAN 02-855/1(2004) : 2004 | ELECTRON BEAM WELDING OF MARINE COMPONENTS - CATEGORY 2 |
| DEFSTAN 13-47/5(2007) : 2007 | STEEL FOR SHELL BODIES AND PROOF SHOT |
| BS EN 286-2:1992 | Simple unfired pressure vessels designed to contain air or nitrogen Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
| BS EN 895:1995 | Destructive tests on welds in metallic materials. Transverse tensile test |
| BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 6622:2007 | Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods |
| BS 6582:2000 | Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products |
| BS 7861-1:2007 | Strata reinforcement support system components used in coal mines Specification for rockbolting |
| BS 1139-3:1994 | Metal scaffolding Specification for prefabricated mobile access and working towers |
| BS 6360:1991 | Specification for conductors in insulated cables and cords |
| BS 2790:1992 | Specification for design and manufacture of shell boilers of welded construction |
| BS 5950-5:1998 | Structural use of steelwork in building Code of practice for design of cold formed thin gauge sections |
| BS 5892-4:1992 | Railway rolling stock materials Specification for forged and rolled tyres |
| BS 1894:1992 | Specification for design and manufacture of electric boilers of welded construction |
| BS 7910:2005 | Guide to methods for assessing the acceptability of flaws in metallic structures |
| BS 5950-2:1992 | Structural use of steelwork in building Specification for materials, fabrication and erection: hot-rolled sections |
| BS 6724(1997) : 1997 | ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED CABLES FOR VOLTAGES OF 600/1000 V AND 1900/3300 V, HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE |
| BS 6622:1999 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV |
| BS 970-3:1991 | Specification for wrought steels for mechanical and allied engineering purposes Bright bars for general engineering purposes |
| BS 7835:2000 | Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire |
| BS PD5500(2009) : 2009 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| PD 5500:2003 | Specification for unfired fusion welded pressure vessels |
| BS 1474:1987 | Specification for wrought aluminium and aluminium alloys for general engineering purposes: bars, extruded round tubes and sections |
| BS 4190:2001 | ISO metric black hexagon bolts, screws and nuts. Specification |
| BS 5467(1997) : 1997 | ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED CABLES FOR VOLTAGES OF 600/1000 V AND 1900/3300 V |
| BS 6724:1990 | Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire |
| BS 5169:1992 | Specification for fusion welded steel air receivers |
| BS 6622:1991 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V |
| BS 970-1:1996 | Specification for wrought steels for mechanical and allied engineering purposes General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
| BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS PD5500(2018) : 2018 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 7835:2007 | Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods |
| BS 806:1993 | Specification for design and construction of ferrous piping installations for and in connection with land boilers |
| BS 5892-2:1992 | Railway rolling stock materials Specification for forged and rolled wheel centres |
| BS 5950-1:2000 | Structural use of steelwork in building Code of practice for design. Rolled and welded sections |
| BS 6258:1988 | Specification for hollow steel bars for machining |
| BS 6223:1990 | Specification for friction welding of joints in metals |
| BS 1501-1:1980 | Steels for pressure purposes Specification for carbon and carbon manganese steels: plates |
| BS 970-1:1991 | Specification for wrought steels for mechanical and allied engineering purposes General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
| BS 6779-1:1998 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction |
| BS PD5500(2012) : 2012 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 64:1992 | Specification for normal and high strength steel bolts and nuts for railway rail fishplates |
| PD 970:2001 | Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels |
| 04/30102361 DC : 0 | BS 5A 4-1 - AEROSPACE SERIES - TEST PIECES AND TEST METHODS FOR METALLIC MATERIALS - PART 1: TENSILE TESTING AT AMBIENT TEMPERATURE |
| DEFSTAN 02-736(PT3)/2(2004) : 2004 | REQUIREMENTS FOR Q1 (NAVY) QUALITY STEEL - PART 3: CASTINGS - CATEGORY 2 |
| BS 5045-8:2000 | Transportable gas containers Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15°C for special portable application |
| BS 6980-4(1990) : 1990 AMD 8713 | STRESS CORROSION TESTING - METHOD FOR THE PREPARATION AND USE OF UNIAXIALLY LOADED TENSION SPECIMENS |
| DEFSTAN 95-23/2(2004) : 2004 | FERROUS ARMOUR QUALITY EXTRUSIONS & FORGINGS |
| BS 5045-7:2000 | Transportable gas containers Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications |
| PD 6635:1999 | Non-alloy steel rod for drawing and/or cold rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod for special applications. Requirements and tests |
| 07/30163374 DC : DRAFT MAR 2007 | BS 7861-1 - STRATA REINFORCEMENT SUPPORT SYSTEM COMPONENTS USED IN COAL MINES - PART 1: SPECIFICATION FOR ROCKBOLTING |
| BS EN 61249-7-1:1996 | Materials for interconnection structures. Sectional specification set for restraining core materials Copper/invar/copper |
| BS 8118-1:1991 | Structural use of aluminium Code of practice for design |
| 02/710149 DC : 0 | PD 2790 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SHELL BOILERS |
| BS 7835:1996 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V having low emission of smoke and corrosive gases when affected by fire |
| DEFSTAN 95-25/2(2004) : 2004 | ARMOUR QUALITY STEEL CASTINGS |
| BS EN 10248-1:1996 | Hot rolled sheet piling of non alloy steels Technical delivery conditions |
| EEMUA 176 : 1998 | SPECIFICATION FOR STRUCTURAL CASTINGS FOR USE OFFSHORE |
| PD 970:2005 | Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels |
| BS 6346:1997 | Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V |
| BS 7870-2:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities Methods of test |
| BS 115:1995 | Specification for metallic resistance materials for electrical purposes |
| BS 5950-7:1992 | STRUCTURAL USE OF STEELWORK IN BUILDING - SPECIFICATION FOR MATERIALS AND WORKMANSHIP: COLD FORMED SECTIONS |
| BS 7613:1994 | Specification for hot rolled quenched and tempered weldable structural steel plates |
| BS 3604-2:1991 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes |
| 08/30171022 DC : DRAFT MAR 2008 | BS 5892-5 AMD2 - RAILWAY ROLLING STOCK MATERIAL (METRIC) - PART 5: SPECIFICATION FOR STEEL BARS FOR RETAINING RINGS FOR TYRED WHEELS |
| BS 7612:1993 | Specification for non-circular steel wire for mechanical springs |
| DEFSTAN 02-830(PT2)/2(2002) : 2002 | REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS - PART 2: CONTINUOUSLY CAST |
| BS EN 10265:1996 | Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| BS EN ISO 7539-4:1995 | Corrosion of metals and alloys. Stress corrosion testing Preparation and use of uniaxially loaded tension specimens |
| BS EN 603-1:1997 | Aluminium and aluminium alloys. Wrought forging stock Technical conditions for inspection and delivery |
| BS EN 876:1995 | Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints |
| BS EN 10002-5:1992 | Tensile testing of metallic materials Method of test at elevated temperatures |
| BS EN 603-2:1997 | Aluminium and aluminium alloys. Wrought forging stock Mechanical properties |
| BS EN 988:1997 | Zinc and zinc alloys. Specification for rolled flat products for building |
| BS EN 10016-1:1995 | Non-alloy steel rods for drawing and/or cold rolling General requirements |
| BS EN 364:1993 | Personal protective equipment against falls from a height. Test methods |
| BS 4449:1997 | Specification for carbon steel bars for the reinforcement of concrete |
| BS 7825-2:1996 | Calibration of rubber and plastics test equipment Calibration procedures |
| DEFSTAN 95-18/1(1995) : 1995 | ALUMINIUM ALLOY ARMOUR PLATE (AA 5083) |
| DD ENV 10080:1996 | Steel for the reinforcement of concrete. Weldable ribbed reinforcing steel B500. Technical delivery conditions for bars, coils and welded fabric |
| DEFSTAN 02-830(PT1)/2(2002) : 2002 AMD 1 2003 | REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS - PART 1: GUNMETAL INGOTS AND CLASS 3 GUNMETAL SAND CASTINGS |
| 04/30111613 DC : DRAFT OCT 2004 | BS 7910 - GUIDE TO METHODS FOR ASSESSING THE ACCEPTABILITY OF FLAWS IN FUSION WELDED STRUCTURES |
| DEFSTAN 02-381(PT1)/1(2000) : 2000 | FORGING AND HEAT TREATMENT OF MAIN PROPULSION GEARS - PART 1: CARBURISED AND HARDENED GEARS CATEGORY 2 |
| BS 5892-1(1992) : 1992 | RAILWAY ROLLING STOCK MATERIALS - PART 1: SPECIFICATION FOR AXLES FOR TRACTION AND TRAILING STOCK |
| BS 5950-4:1994 | STRUCTURAL USE OF STEELWORK IN BUILDING - PART 4: CODE OF PRACTICE FOR DESIGN OF COMPOSITE SLABS WITH PROFILED STEEL SHEETING |
| EN 20286-2 : 1993 | ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 2566-2:1984 | Steel Conversion of elongation values Part 2: Austenitic steels |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN ISO 2566-2:1999 | Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| EN 10002-4 : 1994 | METALLIC MATERIALS - TENSILE TEST - VERIFICATION OF EXTENSOMETERS USED IN UNIAXIAL TESTING |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.