Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS CP102(1973) : 1973

Current

Current

The latest, up-to-date edition.

CODE OF PRACTICE FOR PROTECTION OF BUILDINGS AGAINST WATER FROM THE GROUND

Published date

01-01-1973

Sorry this product is not available in your region.

Foreword
Section 1. General
1 Scope
2 Exchange of information and time schedule
Section 2. Waterproofing of structures below ground
3 Materials
   3.1 Constructional materials
   3.2 Waterproofing materials
4 Preliminary investigations and design criteria for basements
   4.1 General
   4.2 Preventive measures
   4.3 Basis of design
5 Type A structures: structures requiring the protection of an
   impervious membrane
   5.1 Structural requirements
   5.2 Requirements for the impervious membrane
   5.3 Pumping
   5.4 Basement carried on piles where tanking is used
6 Mastic asphalt tanking
   6.1 General
   6.2 Externally applied tanking
   6.3 Internally applied tanking
   6.4 pumping
   6.5 Workmanship
   6.6 Laying techniques
7 Bitumen sheet tanking
   7.1 General
   7.2 Externally applied tanking
   7.3 Internally applied tanking
   7.4 pumping
   7.5 Workmanship
   7.6 Laying techniques
8 Type B structures: structures without membrane
   8.1 General
   8.2 Joints in concrete structures
   8.3 Junction of floor and wall
   8.4 General design recommendations
   8.5 Arrangement of reinforcement
   8.6 Cover of reinforcement
   8.7 Pumping
   8.8 Construction
9 Inspection and repair of concrete basements
   9.1 Inspection of basement
   9.2 Pressure grouting
   9.3 Repair by waterproof renderings
Section 3. Methods of providing damp-proofing of walls
           and floors at or near ground level
10 Damp-proofing of walls
   10.1 General
   10.2 Materials for damp-proof courses
   10.3 Durability
   10.4 Effects of movement
   10.5 Location of damp-proof course
   10.6 Continuity of moisture barrier
   10.7 Work on site
11 Damp-proofing of floors
   11.1 General
   11.2 Principles of damp-proofing
   11.3 Factors influencing the degree of protect ion
   11.4 Continuity of membrane
   11.5 Preparation of site
   11.6 Work on site for waterproof flooring materials
   11.7 Work on site for sandwich membranes
   11.8 Damp-proofing for suspended timber floors
Publications referred to

Explains the methods of preventing the entry of ground water and surface water into a building from the surrounding areas.

Committee
BLCP/22
DevelopmentNote
Reviewed and confirmed by BSI, October 2007. (09/2007)
DocumentType
Standard
PublisherName
British Standards Institution
Status
Current
SupersededBy

01/122607 DC : DRAFT JULY 2001 BS 5325 - CODE OF PRACTICE FOR INSTALLATION OF TEXTILE FLOOR COVERINGS
07/30168571 DC : 0 BS 8204-6 - SCREEDS, BASES AND IN SITU FLOORINGS - PART 6: SYNTHETIC RESIN FLOORINGS - CODE OF PRACTICE
BS 6925:1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)
BS 6398:1983 Specification for bitumen damp-proof courses for masonry
BS 6576(2005) : 2005 CODE OF PRACTICE FOR DIAGNOSIS OF RISING DAMP IN WALLS OF BUILDINGS AND INSTALLATION OF CHEMICAL DAMP-PROOF COURSES
BS 8204-2(2003) : 2003 SCREEDS, BASES AND IN SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE
BS 8204-6(2008) : 2008 SCREEDS, BASES AND IN SITU FLOORINGS - PART 6: SYNTHETIC RESIN FLOORINGS - CODE OF PRACTICE
BS 8204-1(2003) : 2003 SCREEDS, BASES AND IN SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENTITIOUS LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE
BS 8203(2001) : 2001 CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS
BS 5385-3:2014 Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice
BS 5385-3:2007 Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice
05/30090361 DC : DRAFT JUL 2005 BS 6576 - CODE OF PRACTICE FOR DIAGNOSIS OF RISING DAMP IN WALLS OF BUILDINGS AND INSTALLATION OF CHEMICAL DAMP-PROOF COURSES
BS 6576:1985 Code of practice for installation of chemical damp-proof courses
14/30283603 DC : 0 BS 5385-3 - WALL AND FLOOR TILING - PART 3: DESIGN AND INSTALLATION OF INTERNAL ANDEXTERNAL CERAMIC AND MOSAIC FLOOR TILING IN NORMAL CONDITIONS - CODE OF PRACTICE
BS 5385-3:1989 Wall and floor tiling Code of practice for the design and installation of ceramic floor tiles and mosaics
03/303957 DC : DRAFT APR 2003 BS 5385 - WALL AND FLOOR TILING - PART 3: CODE OF PRACTICE FOR THE DESIGN AND INSTALLATION OF INTERNAL AND EXTERNAL CERAMIC FLOOR TILES AND MOSAICS IN NORMAL CONDITIONS
I.S. 57-1:1987 DAMP-PROOF COURSES - PART 1: BITUMEN DAMP-PROOF COURSES
BS 3187:1978 Specification for electrically conducting rubber flooring
BS 3690-2:1989 Bitumens for building and civil engineering Specification for bitumens for industrial purposes
BS 5442-1:1989 Classification of adhesives for construction Classification of adhesives for use with flooring materials
BS 8201:1987 Code of practice for flooring of timber, timber products and wood based panel products
03/312993 DC : DRAFT SEP 2003 BS 8204-1 - SCREEDS, BASES AND IN SITU FLOORINGS - PART 1: CONCRETE BASES AND CEMENT FINE AGGREGATE LEVELLING SCREEDS TO RECEIVE FLOORINGS - CODE OF PRACTICE
I.S. 57-2:1987 DAMP-PROOF COURSES - PART 2: POLYETHYLENE DAMP-PROOF COURSES
I.S. 325-2:1995 CODE OF PRACTICE FOR USE OF MASONRY - PART 2: MASONRY CONSTRUCTION
BS 8000-4:1989 Workmanship on building sites Code of practice for waterproofing
03/312994 DC : DRAFT SEP 2003 BS 8204-2 - SCREEDS, BASES AND IN SITU FLOORINGS - PART 2: CONCRETE WEARING SURFACES - CODE OF PRACTICE
16/30348805 DC : 0 BS 8203 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS
BS 6543(1985) : 1985 GUIDE TO USE OF INDUSTRIAL BY-PRODUCTS AND WASTE MATERIALS IN BUILDING AND CIVIL ENGINEERING
BS 8081:1989 Code of practice for ground anchorages

BS CP121.101(1951) : LATEST CODE OF PRACTICE FOR WALLING - BRICKWORK
BS 4486:1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
BS CP2007-2(1970) : LATEST
BS 12-2:1971 Portland cement ordinary and rapid hardening part 2 metric units
BS 3261:1960 Flexible PVC flooring
BS 3672(1963) : LATEST COLOURED PITCH MASTIC FLOORING
BS CP2001(1957) : LATEST SITE INVESTIGATIONS
BS CP3:CH5-2(1972) : AMD 7908 CODE OF BASIC DATA FOR THE DESIGN OF BUILDINGS - LOADING - WIND LOADS
BS 680-2:1971 Specification for roofing slates Metric units
BS CP3:CH9(1950) : LATEST CODE OF BASIC DATA FOR THE DESIGN OF BUILDINGS - DURABILITY
BS CP115-2(1969) : LATEST THE STRUCTURAL USE OF PRESTRESSED CONCRETE IN BUILDINGS
BS CP203(1969) : LATEST
BS CP123.101(1951) : LATEST DENSE CONCRETE WALLS
BS 4692(1971) : LATEST METHOD FOR DETERMINATION OF SOFTENING POINT OF BITUMEN (RING AND BALL)
BS 2691:1969 Steel wire for prestressed concrete
BS CP3:CH5-1(1967) : LATEST CODE OF BASIC DATA FOR THE DESIGN OF BUILDINGS - LOADING - DEAD AND IMPOSED LOADS
BS CP204-2(1970) : AMD 6968 IN-SITU FLOOR FINISHES - METRIC UNITS
BS 743:1970 Specification for materials for damp-proof courses
BS CP114-2(1969) : LATEST THE STRUCTURAL USE OF REINFORCED CONCRETE IN BUILDINGS

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more