BS 903-A16:1987
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Physical testing of rubber Determination of the effect of liquids
Hardcopy , PDF
15-07-1999
English
30-06-1987
National foreword
Committees responsible
Methods
0 Introduction
1 Scope and field of application
2 References
3 Test liquids
4 Time-interval between vulcanization and testing
5 Conditioning of test pieces
6 Temperature of immersion
7 Period of immersion
8 Determination of change in volume, change in mass or
change in dimensions
9 Determination of extracted soluble matter
10 Determination of change in physical properties after
immersion
11 Determination of change in physical properties after
immersion and drying
12 Test with liquid on one surface only
13 Test report
Annex
A Test liquids
Tables
1 Untitled
2 Untitled
3 Untitled
4 Untitled
Figure
Apparatus for tests on one surface only
Evaluation of resistance to action of liquids by measurement of properties before and after immersion in selected test liquids.
Committee |
PRI/22
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO 1817:2015 | Identical |
DEFSTAN 91-56/2(1997) : 1997 | GREASE, SILICONE, METAL TO RUBBER - NATO CODE: G-394 - JOINT SERVICE DESIGNATION: XG-315 |
DEFSTAN 47-2/3(1991) : 1991 AMD 1 1994 | RUBBER HOSE ASSEMBLIES FOR HYDRAULIC SYSTEMS |
DEFSTAN 59-97/3(1990) : AMD 1 | HEAT SHRINKABLE INSULATION MATERIALS - GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR CAPABILITY APPROVAL |
DEFSTAN 91-35/2(1995) : 1995 | HYDRAULIC FLUID PETROLEUM, EMULSIFYING, JOINT SERVICE DESIGNATION: OX-30 |
BS 5120:1987 | Specification for rubber hoses for gas welding and allied processes |
BS EN 2261:1995 | Silicone rubber (VMQ). Hardness 70 IRHD |
BS 5342:1985 | Specification for rubber hoses for high-pressure saturated steam |
DEFSTAN 47-2/4(1997) : 1997 | RUBBER HOSE AND HOSE ASSEMBLIES FOR HYDRAULIC SYSTEMS (THICK COVER) |
DEFSTAN 59-15(PT1)/3(1990) : 1990 CORR | ELASTOMERIC INSULATING MATERIALS AND POLYTETRAFLUOROETHYLENE (PTFE) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR QUALIFICATION APPROVAL |
DEFSTAN 91-43/2(1993) : 1993 | LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330 |
BS 903-A37:1987 | Physical testing of rubber Determination of adhesion to and corrosion of metals |
BS MA 16:1971 | Specification for inflatable boats (manual or motor propelled) |
BS EN 2260:1995 | Silicone rubber (VMQ). Hardness 60 IRHD |
BS EN 2429:1995 | Ethylene-propylene rubber (EPM/EPDM). Hardness 60 IRHD |
BS 2751(1982) : AMD 4728 | SPECIFICATION FOR ACRYLONITRILE BUTADIENE RUBBER COMPOUNDS |
BS EN 2430:1995 | Ethylene-propylene rubber (EPM/EPDM). Hardness 70 IRHD |
BS 3858:1992 | Specification for binding and identification sleeves for use on electric cables and wires |
BS AU 217-2:1989 | Maximum road speed limiters for motor vehicles Specification for system and component requirements |
BS 2F 67:1980 | Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes |
BS 4089:1966 | Specification for rubber hose and hose assemblies for liquefied petroleum gas lines |
BS 1435-1:1987 | Rubber hose assemblies for oil suction and discharge services Specification for the assemblies |
BS 7825-3.8:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Degradation and environmental properties |
BS 6066:1981 | Specification for thermoplastics hoses for compressed air |
BS 7780-4:1995 | Specification for rotary shaft lip type seals Performance test procedures |
BS EN 2104:1996 | Acrylonitrile-butadiene rubber (NBR). Hardness 40 IRHD |
BS EN 2262:1995 | Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD |
BS EN 2428:1995 | Ethylene-propylene rubber (EPM/EPDM). Hardness 50 IRHD |
BS EN 2431:1995 | Ethylene-propylene rubber (EPM/EPDM). Hardness 80 IRHD |
BS F 130:1987 | Specification for rubber bonded compressed aramid fibre jointing material for aerospace purposes |
BS EN 2259:1995 | Silicone rubber (VMQ). Hardness 50 IRHD |
BS 2494:1986 | Specification for elastomeric joint rings for pipework and pipelines |
BS 5118:1980 | Specification for rubber hoses for compressed air |
BS 3158:1985 | Specification for rubber hoses and hose assemblies for aircraft ground fuelling and defuelling |
BS 7019:1989 | Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines |
BS 2494:1990 | Specification for elastomeric seals for joints in pipework and pipelines |
BS G 246:1991 | Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses |
BS 6847:1987 | Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids |
BS 7184:1989 | Recommendations for selection, use and maintenance of chemical protective clothing |
BS F 125:1973 | Specification for rubber bonded compressed asbestos fibre jointing |
BS AU 218:1987 | Specification for automotive synchronous belt drives |
BS 2767:1972 | Specification for valves and unions for hot water radiators |
BS 3558:1980 | Glossary of rubber terms |
BS AU 150b:1984 | Specification for automotive V-belts and pulleys |
BS 3905:1984 | Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, primarily for use in mines |
BS 3395:1989 | Specification for electrically bonded rubber hoses and hose assemblies for dispensing petroleum based fuels |
BS 4332:1989 | Specification for phenol-formaldehyde resin-bonded cork jointing |
BS 2752:1990 | Specification for chloroprene rubber compounds |
BS 3492:1987 | Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels |
BS 2752:1982 | Specification for chloroprene rubber compounds |
BS 903-2:1997 | Physical testing of rubber Guide to the application of statistics to rubber testing |
BS 3G 230:2000 | Specification for general requirements for aircraft electrical cables (second series) |
BS 7442-0:1991 | Rubber or plastics covered rollers Introduction |
BS 903-A18:1973 | Physical testing of rubber Determination of equilibrium water vapour absorption |
BS 3G 198-1:1989 | Sleeves for aircraft electric cables and equipment wires Specification for elastomeric sleeves for binding and identification |
BS 3395:1980 | Specification for electrically bonded hose and hose assemblies for fuel dispensers |
BS 6997:1990 | Specification for elastomeric toroidal sealing rings (\'O\'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996 |
BS G 198-5:1997 | Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat shrinkable moulded shapes |
BS 3682-1:1994 | Specification for railway brake hose Specification for compressed air brake hose |
BS 3454:1984 | Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors), primarily for use in mines |
BS 5409-2:1978 | Specification for nylon tubing Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry |
BS AU 110a:1995 | Specification for rubber hoses and hose assemblies for automotive air pressure braking systems |
BS 3454:1995 | Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines |
BS 2767:1991 | Specification for manually operated copper alloy valves for radiators |
BS 4089:1989 | Specification for hoses and hose assemblies for liquefied petroleum gas |
BS 7541:1992 | Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage |
BS 903-1:1995 | Physical testing of rubber Guide to the selection and use of methods of test for rubber |
BS EN 297:1994 | Gas-fired central heating boilers. Type B<sub>11</sub> and B<sub>11BS</sub> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
BS 2751:1990 | Specification for general purpose acrylonitrile-butadiene rubber compounds |
BS 3905:1995 | Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines. |
BS 6996:1989 | Specification for mineral oil resistant acrylonitrile-butadiene rubber compounds |
BS 5963:1981 | Specification for electrically operated automatic gas shut-off valves |
BS 5122:1986 | Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
BS EN 2432:1995 | Ethylene-propylene rubber (EPM/EPDM). Hardness 90 IRHD |
BS 5176:1975 | Specification for classification system for vulcanized rubbers |
BS 4G 198-1:1997 | Sleeves for aircraft electric cables and equipment wires Specification for elastomeric sleeves for binding and identification |
BS 6067:1981 | Specification for multifunctional gas controls for domestic, commercial and catering appliances |
BS 5173-5:1977 | Methods of test for hoses Chemical resistance tests |
BS 903-A34:1978 | Methods of testing vulcanized rubber. Determination of stress relaxation of rubber rings in compression |
BS 6505:1984 | Specification for rubber-type materials used for controls components for use with 1st, 2nd and 3rd family gases |
BS 6469:1984 | Methods of test for insulation and sheaths of electric cables |
BS 1870-1:1988 | Safety footwear Specification for safety footwear other than all-rubber and all-plastics moulded types |
BS 5412-5:1976 | Specification for the performance of draw-off taps with metal bodies for water services Physio-chemical characteristics: materials, coatings |
BS 1399-2:1970 | Specification for rotary shaft lip seals Methods of performance rating |
BS 6469:1990 | Methods of test for insulation and sheaths of electric cables |
ISO 2977:1997 | Petroleum products and hydrocarbon solvents Determination of aniline point and mixed aniline point |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ISO 5661:1983 | Petroleum products Hydrocarbon liquids Determination of refractive index |
ISO 1826:1981 | Rubber, vulcanized Time-interval between vulcanization and testing Specification |
ISO 4661:1977 | Rubber Preparation of test pieces |
ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
ISO 5282:1982 | Aromatic hydrocarbons — Determination of sulphur content — Pitt-Ruprecht reduction and spectrophotometric method |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ISO 471:1995 | Rubber Temperatures, humidities and times for conditioning and testing |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.