BS 8529:2017
Current
The latest, up-to-date edition.
Composite doorsets. Domestic external doorsets, Specification
Hardcopy , PDF
English
01-08-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Handing
5 Components
6 Construction and design
7 Appearance and finish
8 Glazing
9 Installation, use, cleaning and
maintenance
10 Thermal cycling
11 Security
12 Safety in case of fire
13 Safety in use
14 Weathertightness
15 Operation and strength characteristics
16 Hygiene, health and environment
17 Acoustic performance
18 Energy conservation
19 Marking
Annex A (normative) - Specification for handing
Annex B (normative) - Thermal cyclic test
Bibliography
Describes requirements for the design, construction and performance of domestic external composite doorsets.
| Committee |
B/538/1
|
| DevelopmentNote |
Supersedes BS 8529(2010) & 16/30339191 DC. To be read in conjunction with BS EN 14351-1. (08/2017)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This British Standard specifies requirements for the design, construction and performance of domestic external composite doorsets. This British Standard applies to the following types of doorset: hinged side‑hung single leaf (handed); and hinged double leaf. This British Standard is applicable to doors that are supplied fully finished, part finished or unfinished.
| BS EN 1027:2016 | Windows and doors. Water tightness. Test method |
| BS EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| BS EN 13141-1:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation Externally and internally mounted air transfer devices |
| BS EN 12608-1:2016 | Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods Non-coated PVC-U profiles with light coloured surfaces |
| BS EN 12519:2004 | Windows and pedestrian doors. Terminology |
| BS 6262-4:2005 | Glazing for buildings Code of practice for safety related to human impact |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes. Requirements and specifications |
| BS 6375-2:2009 | Performance of windows and doors Classification for operation and strength characteristics and guidance on selection and specification |
| BS 8000-7:1990 | Workmanship on building sites Code of practice for glazing |
| BS EN 14351-1 : 2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| BS EN 755-9:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Profiles, tolerances on dimensions and form |
| BS EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| BS EN 13142:2013 | Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics |
| BS 6102-12:1991 | Cycles Specification for stem wedge angle |
| BS 6262-7:2005 | Glazing for buildings Code of practice for the provision of information |
| BS EN 942:2007 | Timber in joinery. General requirements |
| BS 6262-2:2005 | Glazing for buildings Code of practice for energy, light and sound |
| BS EN 14374:2004 | Timber structures. Structural laminated veneer lumber. Requirements |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| BS EN ISO 105-A01:2010 | Textiles. Tests for colour fastness General principles of testing |
| BS EN 755-2:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties |
| BS ISO 6707-1:2014 | Buildings and civil engineering works. Vocabulary General terms |
| BS 6262-3:2005 | Glazing for buildings Code of practice for fire, security and wind loading |
| BS EN ISO 2813:2014 | Paints and varnishes. Determination of gloss value at 20 degrees, 60 degrees and 85 degrees |
| BS EN 12365-1:2003 | Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Performance requirements and classification |
| BS 7722:2010 | Surface covered PVC-U profiles for windows and doorsets. Specification |
| BS 4873:2004 | Aluminium alloy windows |
| BS 6375-3(2009) : 2009 | PERFORMANCE OF WINDOWS AND DOORS - PART 3: CLASSIFICATION FOR ADDITIONAL PERFORMANCE CHARACTERISTICS AND GUIDANCE ON SELECTION AND SPECIFICATION |
| BS 6262-6:2005 | Glazing for buildings Code of practice for special applications |
| BS 6262-1:2005 | Glazing for buildings General methodology for the selection of glazing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.