BS 7333:1990
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Specification for slewing jib cranes
Hardcopy , PDF
02-08-2019
English
31-07-1990
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
Section 1. General
1.1 Scope
1.2 Definitions
1.3 Information to be provided
1.4 Classification
1.5 Protection and painting of crane structure
Section 2. Structural
2.1 Permissible stresses
2.2 Allowable deflection
2.3 Joints
Section 3. Mechanical
3.1 Guarding
3.2 Rotating and fixed shafts and axles
3.3 Bearings
3.4 End stops
Section 4. Electrical
4.1 Power supply
4.2 Isolation
4.3 Control equipment
4.4 Electric current pick-up
4.5 Enclosures
4.6 Cables and conductors
Section 5. Technical information, inspection, testing,
certification and marking
5.1 Technical information
5.2 Testing at manufacturer's works
5.3 Inspection and testing after installation and
before putting crane into service
5.4 Test certificates
5.5 Marking of the crane
Appendices
A. Information to be supplied by the purchaser with
enquiry and/or order
B. Information to be supplied by the manufacturer
C. List of British Standards for materials and
equipment suitable for use in the manufacture of
cranes
Tables
1. Group classification of the crane
2. State of loading for the crane
3. Typical classifications for jib cranes
4. Allowable deflection
5. Recommended maximum lifting speeds
6. Uprating of cables to hoist unit
7. British Standards for materials and equipment
suitable for use in the manufacture of cranes
Figures
1. Typical slewing jib cranes
2. Typical information to be provided by the
manufacturer
Requirements for the design, construction and testing. For use with either hand, electric or pneumatic hoists.
| Committee |
MHE/3/3
|
| DevelopmentNote |
Supersedes 87/72251 DC (09/2005) Reviewed and confirmed by BSI, November 2007. (10/2007) Earlier was partially superseded in error, now has been reinstated. (04/2013)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| BS 4500-4:1985 | ISO limits and fits Specification for system of cone (taper) fits for cones from <i>C</i>=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
| BS 3692:1967 | Specification for ISO metric precision hexagon bolts, screws and nuts. Metric units |
| BS 3100:1976 | Specification for steel castings for general engineering purposes |
| BS 2771-1:1986 | Electrical equipment of industrial machines Specification for general requirements |
| BS 4678-4:1982 | Cable trunking Specification for cable trunking made of insulating material |
| BS 4235(1967) : LATEST | |
| BS 4500-5:1988 | ISO limits and fits Specification for system of cone tolerances for conical workpieces from <i>C</i> = 1:3 to 1:500 and lengths from 6 mm to 630 mm |
| BS 46-1:1958 | Keys and keyways and taper pins Specification. Keys and keyways |
| BS 916:1953 | Specification for black bolts, screws and nuts, hexagon and square, with B.S.W. threads, and partly machined bolts, screws and nuts, hexagon and square, with B.S.W. or B.S.F. threads |
| BS 4652:1971 | Specification for metallic zinc-rich priming paint (organic media) |
| BS 3139-1:1959 | Specification for high strength friction grip bolts for structural engineering. General grade bolts |
| BS 3073:1977 | Specification for nickel and nickel alloys: strip |
| BS 1486-1:1959 | Lubricating nipples Lubricating nipples and adaptors for use on machinery and vehicles |
| BS 4678-2:1973 | Cable trunking Steel underfloor (duct) trunking |
| BS 302-4:1987 | Stranded steel wire ropes Specification for ropes for lifts |
| BS 4500-3:1973 | ISO limits and fits Working limits on untoleranced dimensions |
| BS 3134-1:1979 | Metric tapered roller bearings Specification for dimensions and tolerances of single row bearings |
| BS 545:1982 | Specification for bevel gears (machine cut) |
| BS 3294-1:1960 | Specification for the use of high strength friction grip bolts in structural steelwork General grade bolts |
| BS 302-8:1989 | Stranded steel wire ropes Specification for higher breaking load ropes |
| BS 4604-1:1970 | SPECIFICATION FOR THE USE OF HIGH STRENGTH FRICTION GRIP BOLTS IN STRUCTURAL STEELWORK METRIC SERIES - PART 1: GENERAL GRADE |
| BS 3643(1963) : LATEST | |
| BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
| BS 3551:1962 | Specification for alloy steel shackles |
| BS 2452:1954 | Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes) |
| BS 4752-1:1977 | Specification for switchgear and controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Circuit-breakers |
| BS 1083:1965 | Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads) |
| BS 5135:1984 | Specification for arc welding of carbon and carbon manganese steels |
| BS CP3012(1972) : 1972 | CODE OF PRACTICE FOR CLEANING AND PREPARATION OF METAL SURFACES |
| BS 357:1958 | Specification for power-driven travelling jib cranes (rail-mounted low carriage type) |
| ISO 4300:1984 | Manganese ores and concentrates Determination of lead content Polarographic methods |
| BS 5216:1975 | Specification for patented cold drawn carbon steel wire for mechanical springs |
| BS 302-2:1987 | Stranded steel wire ropes Specification for ropes for general purposes |
| BS 4232:1967 | Specification for surface finish of blast-cleaned steel for painting |
| BS 6346:1989 | Specification for PVC-insulated cables for electricity supply |
| BS 302-6:1987 | Stranded steel wire ropes Specification for ropes for mine hoisting |
| BS 292-2:1982 | Rolling bearings: ball bearings, cylindrical and spherical roller bearings Specification for dimensions of ball bearings and cylindrical roller bearings (inch series) |
| BS 23:1970 | Specification for copper and copper-cadmium trolley and contact wire for electric traction |
| BS 302-5:1987 | Stranded steel wire ropes Specification for ropes for hauling purposes |
| BS 4500-1:1969 | ISO limits and fits General, tolerances and deviations |
| BS 302-1:1987 | Stranded steel wire ropes Specification for general requirements |
| BS 24-3B:1955 | Railway rolling stock material Specification for helical and volute springs and spring steels |
| BS 5304:1988 | Code of practice for safety of machinery |
| BS 275:1927 | Specification for dimensions of rivets (½ inch to 1¾ inch diameter) |
| BS 4190:1967 | Specification for ISO metric black hexagon bolts, screws and nuts |
| BS 587:1957 | Specification. Motor starters and controllers |
| BS 5419:1977 | Specification for air-break switches, air-break disconnectors, air-break switch disconnectors and fuse-combination units for voltages up to and including 1000 V a.c. and 1200 V d.c. |
| BS 464:1958 | Specification for thimbles for wire ropes |
| BS 1486-2:1961 | Lubricating nipples Heavy duty lubricating nipples |
| BS 436-2:1970 | Spur and helical gears Basic rack form, modules and accuracy (1 to 50 metric module) |
| BS 7121-1:1989 | Code of practice for safe use of cranes General |
| BS 2789:1985 | Specification for spheroidal graphite or nodular graphite cast iron |
| BS 721-1:1963 | Specification for worm gearing Imperial units |
| BS 436-1:1967 | Spur and helical gears Basic rack form, pitches and accuracy (diametral pitch series) |
| BS 721-2:1983 | Specification for worm gearing Metric units |
| BS 327:1964 | Specification for power-driven derrick cranes |
| BS 5744:1979 | Code of practice for safe use of cranes (overhead/underhung travelling and goliath cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes, container handling cranes and rail-mounted low carriage cranes) |
| BS 2799:1974 | Specification for power-driven tower cranes for building and engineering construction |
| BS 302-7:1989 | Stranded steel wire ropes Specification for large diameter ropes for general purposes |
| BS 1761:1951 | Specification for single bucket excavators of the crawler-mounted friction-driven type |
| BS 4568-2:1970 | Specification for steel conduit and fittings with metric threads of ISO form for electrical installations Fittings and components |
| BS 463-1:1958 | Specification for sockets for wire ropes Inch units |
| BS 3550:1963 | Specification for involute splines |
| BS 3134-2:1981 | Metric tapered roller bearings Specification for dimensions of double row bearings |
| BS 3032:1958 | Specification for higher tensile steel shackles |
| BS 2573-2:1980 | Rules for the design of cranes Specification for classification, stress calculations and design of mechanisms |
| BS 2523:1966 | Specification for lead-based priming paints |
| BS 466:1984 | Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use |
| BS 5424-1:1977 | Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Contactors |
| BS 4620:1970 | Specification for rivets for general engineering purposes |
| BS 4678-1:1971 | Cable trunking Steel surface trunking |
| BS 3535:1962 | Specification for safety isolating transformers for industrial and domestic purposes |
| BS 4568-1:1970 | Specification for steel conduit and fittings with metric threads of ISO form for electrical installations Steel conduit, bends and couplers |
| BS 463-2:1970 | Specification for sockets for wire ropes Metric units |
| BS 302-3:1987 | Stranded steel wire ropes Specification for zinc coated ropes for ships |
| BS 3410:1961 | Specification for metal washers for general engineering purposes |
| BS 461:1970 | Specification for Bordeaux connections |
| BS 292-1:1982 | Rolling bearings: ball bearings, cylindrical and spherical roller bearings Specification for dimensions of ball bearings, cylindrical and spherical roller bearings (metric series) |
| BS 6004:1990 | Specification for PVC-insulated cables (non-armoured) for electric power and lighting |
| BS 3134-3:1981 | Metric tapered roller bearings Specification for dimensions of flanged cups |
| BS 462:1983 | Specification for wire rope grips |
| BS 2059:1953 | Specification for straight-sided splines and serrations |
| BS 218(1963) : LATEST | LEADED BRASS (58 PER CENT COPPER, 2 PER CENT LEAD) FORGING STOCK AND FORGINGS |
| BS 6681:1986 | Specification for malleable cast iron |
| BS 3698:1964 | Specification for calcium plumbate priming paints |
| BS 46-3:1951 | Keys and keyways and taper pins Specification for solid and split taper pins for general engineering purposes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.