BS 7273-4:2015
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Code of practice for the operation of fire protection measures Actuation of release mechanisms for doors
Hardcopy , PDF
25-01-2021
English
30-06-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Categories of actuation
5 Exchange of information and definition of
responsibilities
6 Variations from the recommendations of this standard
7 Methods of actuation
8 Mechanisms for unlocking and release of doors
9 Interface design
10 Monitoring, integrity and reliability of actuation
arrangements
11 Manual release controls
12 Special considerations for the design of any associated
fire detection and fire alarm system
13 Power supplies
14 Cables, wiring and other interconnections
15 Acoustically-actuated systems
16 Radio-actuated systems
17 Electromagnetic compatibility
18 Electrical safety
19 Door signage
20 Commissioning
21 Maintenance
Annexes
Annex A (informative) - Applications for mechanisms for
unlocking and releasing doors
Annex B (normative) - Selection of category of actuation
Annex C (informative) Typical actuation arrangements for
Release mechanisms
Annex D (informative) - Example of a suitable sign for a
manual release control
Annex E (informative) - The advantages and disadvantages
of acoustic actuation of release mechanisms
Annex F (informative) - The advantages and disadvantages
of radio actuation of release mechanisms
Annex G (informative) - Model commissioning certificate
Bibliography
Provides recommendations for the design, installation, commissioning and maintenance of electrical control arrangements for actuation of mechanisms that unlock, release or open doors in the event of fire.
| Committee |
FSH/12/4
|
| DevelopmentNote |
Supersedes BS 7273-4(2007) & 15/30288999 DC. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| BS 9999:2017 | Fire safety in the design, management and use of buildings. Code of practice |
| BS 5266-1:2016 | Emergency lighting Code of practice for the emergency lighting of premises |
| BS 9991:2015 | Fire safety in the design, management and use of residential buildings. Code of practice |
| BS EN 61386-1:2008 | Conduit systems for cable management General requirements |
| BS 5266-1:2011 | Emergency lighting Code of practice for the emergency escape lighting of premises |
| BS EN ISO 9001:2015 | Quality management systems. Requirements |
| BS EN 1155:1997 | Building hardware. Electrically powered hold-open devices for swing doors. Requirements and test methods |
| BS EN 12209:2016 | Building hardware. Mechanically operated locks and locking plates. Requirements and test methods |
| 1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
| BS EN 50133-2-1:2000 | Alarm systems. Access control systems for use in security applications. General requirements for components |
| EN 300 220-3 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1 000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500 MW; PART 3: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| BS EN ISO 7010 : 2012 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011) |
| BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| BS EN 54-2 : 1998 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| BS EN 14637:2007 | Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance |
| BS EN 50172:2004 | Emergency escape lighting systems |
| EN 300 220-2 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1 000 MHZ - PART 2: HARMONISED STANDARD FOR ACCESS TO RADIO SPECTRUM FOR NON SPECIFIC RADIO EQUIPMENT |
| BS EN 16005:2012 | Power operated pedestrian doorsets. Safety in use. Requirements and test methods |
| BS EN 60702-1 : 2002 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES |
| BS EN 1527:2013 | Building hardware. Hardware for sliding doors and folding doors. Requirements and test methods |
| BS 5266-8(2004) : 2004 | EMERGENCY ESCAPE LIGHTING SYSTEMS |
| BS EN 1838:2013 | Lighting applications. Emergency lighting |
| EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| BS EN 54-11:2001 | Fire detection and fire alarm systems Manual call points |
| BS EN 60839-11-1:2013 | Alarm and electronic security systems Electronic access control systems. System and components requirements |
| BS 476-22:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction |
| BS EN 14846:2008 | Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.